上海交通大学学报(英文版) ›› 2012, Vol. 17 ›› Issue (4): 470-474.doi: 10.1007/s12204-010-1085-0

• 论文 • 上一篇    下一篇

Dry Sliding Wear Behavior of Silver Containing Ni-Based Composite-Steel Tribo-Pair

RAJNESH Tyagi1,2, XIONG Dang-sheng1 (熊党生), LI Jian-liang1 (李建亮), DAI Ji-hui1 (戴基卉)   

  1. (1. Department of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094, China; 2. Department of Mechanical Engineering, Institute of Technology, Banaras Hindu University, Varanasi 221005, India)
  • 出版日期:2012-08-30 发布日期:2012-11-16
  • 通讯作者: XIONG Dang-sheng1 (熊党生) E-mail:xiongds@163.com

Dry Sliding Wear Behavior of Silver Containing Ni-Based Composite-Steel Tribo-Pair

RAJNESH Tyagi1,2, XIONG Dang-sheng1 (熊党生), LI Jian-liang1 (李建亮), DAI Ji-hui1 (戴基卉)   

  1. (1. Department of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094, China; 2. Department of Mechanical Engineering, Institute of Technology, Banaras Hindu University, Varanasi 221005, India)
  • Online:2012-08-30 Published:2012-11-16
  • Contact: XIONG Dang-sheng1 (熊党生) E-mail:xiongds@163.com

摘要: Ni-based self lubricating composites containing four different amounts of silver were prepared by powder metallurgy (PM) route. The room temperature friction and wear behavior was investigated by carrying out dry sliding experiments against bearing steel using a ring-on-disk configuration. Tests were conducted at a constant load of 100N and different sliding speeds of 0.5, 1.0 and 1.5 m/s to analyze the effect of both the speed and the silver content on the wear behavior of the tribo-pair. The friction coefficient and the wear rate of the composites were found to decrease with increasing both the sliding speed and the silver content. The wear rate of the counterface was observed to be a little higher when it was siding against the composite having silver in comparison to that without any silver. However, the overall wear rate of the tribo-pair was found to decrease with increasing sliding speed and silver content.

关键词: Ni-based composites, solid lubricants, silver lubrication, sliding wear, self lubrication, non-ferrous materials

Abstract: Ni-based self lubricating composites containing four different amounts of silver were prepared by powder metallurgy (PM) route. The room temperature friction and wear behavior was investigated by carrying out dry sliding experiments against bearing steel using a ring-on-disk configuration. Tests were conducted at a constant load of 100N and different sliding speeds of 0.5, 1.0 and 1.5 m/s to analyze the effect of both the speed and the silver content on the wear behavior of the tribo-pair. The friction coefficient and the wear rate of the composites were found to decrease with increasing both the sliding speed and the silver content. The wear rate of the counterface was observed to be a little higher when it was siding against the composite having silver in comparison to that without any silver. However, the overall wear rate of the tribo-pair was found to decrease with increasing sliding speed and silver content.

Key words: Ni-based composites, solid lubricants, silver lubrication, sliding wear, self lubrication, non-ferrous materials

中图分类号: