Accurate 3D Reconstruction of Subject-Specific Knee Finite Element Model to Simulate the
Articular Cartilage Defects

doi:10.1007/s12204-011-1199-z

上海交通大学学报（英文版） ›› 2011, Vol. 16 ›› Issue (5): 620-627.doi: 10.1007/s12204-011-1199-z

Accurate 3D Reconstruction of Subject-Specific Knee Finite Element Model to Simulate the
Articular Cartilage Defects

DONG Yue-fu (董跃福), HU Guang-hong (胡广洪), ZHANG Luo-lian (张罗莲), HU Yang (胡杨) DONG Ying-hai (董英海), XU Qing-rong
(徐卿荣)

(1. Department of Orthopaedics, Renji Hospital,
Shanghai Jiaotong University School of Medicine, Shanghai 200127,
China; 2. Department of Plasticity Engineering, Shanghai Jiaotong
University, Shanghai 200030, China)

收稿日期:2011-01-12 出版日期:2011-10-29 发布日期:2011-10-20
通讯作者: XU Qing-rong (徐卿荣) E-mail:xuqingro@139.com
基金资助:
the National Natural Science Foundation of China (No. 81071235) and the Medicine and Engineering Interdisciplinary Fund of Shangha Jiaotong University (No. YG2010MS26)

Accurate 3D Reconstruction of Subject-Specific Knee Finite Element Model to Simulate the
Articular Cartilage Defects

DONG Yue-fu (董跃福), HU Guang-hong (胡广洪), ZHANG Luo-lian (张罗莲), HU Yang (胡杨) DONG Ying-hai (董英海), XU Qing-rong
(徐卿荣)

(1. Department of Orthopaedics, Renji Hospital,
Shanghai Jiaotong University School of Medicine, Shanghai 200127,
China; 2. Department of Plasticity Engineering, Shanghai Jiaotong
University, Shanghai 200030, China)

Received:2011-01-12 Online:2011-10-29 Published:2011-10-20
Contact: XU Qing-rong (徐卿荣) E-mail:xuqingro@139.com
Supported by:
the National Natural Science Foundation of China (No. 81071235) and the Medicine and Engineering Interdisciplinary Fund of Shangha Jiaotong University (No. YG2010MS26)

摘要/Abstract

摘要： Abstract: The biomechanical relationship between
the articular cartilage defect and knee osteoarthritis (OA) has not
been clearly defined. This study presents a 3D knee finite element
model (FEM) to determine the effect of cartilage defects on the
stress distribution around the defect rim. The complete knee FEM,
which includes bones, articular cartilages, menisci and ligaments,
is developed from computed tomography and magnetic resonance images.
This FEM then is validated and used to simulate femoral cartilage
defects. Based on the obtained results, it is confirmed that the 3D
knee FEM is reconstructed with high-fidelity level and can
faithfully predict the knee contact behavior. Cartilage defects
drastically affect the stress distribution on articular cartilages.
When the defect size was smaller than 1.00 cm2, the stress
elevation and redistribution were found undistinguishable. However,
significant stress elevation and redistribution were detected due to
the large defect sizes (≥1.00 cm2. This alteration of
stress distribution has important implications relating to the
progression of cartilage defect to OA in the human knee joint.

关键词: 3D reconstruction, knee joint, finite element
model (FEM), cartilage defect, osteoarthritis (OA)

Abstract: Abstract: The biomechanical relationship between
the articular cartilage defect and knee osteoarthritis (OA) has not
been clearly defined. This study presents a 3D knee finite element
model (FEM) to determine the effect of cartilage defects on the
stress distribution around the defect rim. The complete knee FEM,
which includes bones, articular cartilages, menisci and ligaments,
is developed from computed tomography and magnetic resonance images.
This FEM then is validated and used to simulate femoral cartilage
defects. Based on the obtained results, it is confirmed that the 3D
knee FEM is reconstructed with high-fidelity level and can
faithfully predict the knee contact behavior. Cartilage defects
drastically affect the stress distribution on articular cartilages.
When the defect size was smaller than 1.00 cm2, the stress
elevation and redistribution were found undistinguishable. However,
significant stress elevation and redistribution were detected due to
the large defect sizes (≥1.00 cm2. This alteration of
stress distribution has important implications relating to the
progression of cartilage defect to OA in the human knee joint.

Key words: 3D reconstruction, knee joint, finite element
model (FEM), cartilage defect, osteoarthritis (OA)

中图分类号:

R 684

DONG Yue-fu (董跃福), HU Guang-hong (胡广洪), ZHANG Luo-lian (张罗莲), HU Yang. Accurate 3D Reconstruction of Subject-Specific Knee Finite Element Model to Simulate the
Articular Cartilage Defects[J]. 上海交通大学学报（英文版）, 2011, 16(5): 620-627.

DONG Yue-fu (董跃福), HU Guang-hong (胡广洪), ZHANG Luo-lian (张罗莲), HU Yang (胡杨) DONG Ying-hai (董英海), XU Qing-rong . Accurate 3D Reconstruction of Subject-Specific Knee Finite Element Model to Simulate the
Articular Cartilage Defects[J]. Journal of shanghai Jiaotong University (Science), 2011, 16(5): 620-627.

参考文献

[1] Pena E, Calvo B, Martinez M A, et al. A three-dimensional finite

element analysis of the combined behavior of ligaments and menisci in the

healthy human knee joint [J]. Journal of Biomechanics, 2006, 39(9): 1686-1701.
[2] Donahue T L, Hull M L, Rashid M M, et al. A finite element model of the

human knee joint for the study of tibio-femoral contact [J]. Journal of Biomechanical Engineering, 2002,

124(3): 273-280.
[3] Shirazi R, Shirazi-adl A, Hurtig M. Role of cartilage collagen fibrils

networks in knee joint biomechanics under compression [J]. Journal of Biomechanics, 2008,

41(16): 3340-3348.
[4] Shirazi R, Shirazi-adl A. Computational biomechanics of articular

cartilage of human knee joint: Effect of osteochondral defects [J]. Journal of Biomechanics, 2009,

42(15): 2458-2465.
[5] Yang N H, Canavan P K, Nayeb-hashemi H, et al. Protocol for constructing

subject-specific biomechanical models of knee joint [J].

Computer Methods in Biomechanics and Biomedical Engineering, 2010,

13(5): 589-603.
[6] Pena E, Calvo B, Martinez M A, et al. Finite element analysis of the

effect of meniscal tears and meniscectomies on human knee biomechanics [J]. Clinical Biomechanics,

2005, 20(5): 498-507.
[7] Widuchowski W, Widuchowski J, Trzaska T. Articular cartilage defects:

Study of 25 124 knee arthroscopies [J]. The Knee, 2007, 14(3): 177-182.
[8] Papaioannou G, Demetropoulos C K, King Y H. Predicting the effects of

knee focal articular surface injury with a patient-specific finite element

model [J]. The Knee, 2010, 17(1): 61-68.
[9] Li G, Lopez O, Rubash H. Variability of a three-dimensional finite

element model constructed using magnetic resonance images of a knee for

joint contact stress analysis [J]. Biomedical Engineering, 2001, 123(4): 341-346.
[10] Meakin J R, Shrive N G, Frank C B, et al. Finite element analysis of the

meniscus: The influence of geometry and material properties on its

behaviour [J]. The Knee, 2003, 10(1): 33-41.
[11] Pelletier J P, Raynauld J P, Berthiaume M J, et al. Risk factors

associated with the loss of cartilage volume on weight-bearing areas

in knee osteoarthritis patients assessed by quantitative magnetic

resonance imaging: A longitudinal study [J]. Arthritis Research

and Therapy, 2007, 9(4): R74.
[12] Weiss J A, Gardiner J C. Computational modeling of ligament

mechanics [J]. Critical Review in Biomedical Engineering, 2001, 29(3): 303-371.
[13] Yang N, Nayeb-hashemi H, Canavan P K. The combined effect of frontal

plane tibiofemoral knee angle and meniscectomy on the cartilage contact

stresses and strains [J]. Annals of Biomedical Engineering, 2009, 37(11): 2360-2372.
[14] Sathasivam S, Walker P S. A computer model with surface friction for the

prediction of total knee kinematics [J]. Journal of Biomechanics, 1997, 30(2): 177-184.
[15] Karataglis D, Green M A, Learmonth D J. Autologous osteochondral

transplantation for the treatment of chondral defects of the knee [J]. The Knee, 2006,

13(1): 32-35.
[16] Li G, Gil J, Kanamori A, et al. A validated three-dimensional

computational model of a human knee joint [J]. Journal of Biomechanical Engineering, 1999, 121(6): 657-662.
[17] Bowers M E, Tung G A, Fleming B C, et al. Quantification of meniscal

volume by segmentation of 3T magnetic resonance images [J]. Journal of Biomechanics, 2007,

40(12): 2811-2815.
[18] Fukubayashi T, Kurosawa H. The contact area and pressure distribution

pattern of the knee: A study of normal and osteoarthrotic knee joints [J].

Acta Orthopaedica Scandinavica, 1980, 51(6): 871-879.
[19] Walker P S, Erkman M J. The role of the menisci in force transmission

across the knee [J]. Clinical Orthopaedics and Related

Research, 1975(109): 184-192.
[20] Bendjaballah M Z, Shirazi-Adl A, Zukor D J. Biomechanics of the

human knee joint in compression: Reconstruction, mesh generation and finite

element analysis [J]. The knee, 1995, 2(2): 69-79.
[21] Radin E L, Burr D B. Hypothesis: Joints can heal [J]. Seminars in Arthritis and Rheumatism, 1984,

13(3): 293-302.
[22] Jackson D W, Lalor P A, Aberman H M, et al. Spontaneous repair of

full-thickness defects of articular cartilage in a goat model: A preliminary

study [J]. Journal of Bone and Joint Surgery, 2001, 83(1): 53-64.
[23] Hughston J C, Hergenroeder P T, Courtenay B G. Osteochondritis dissecans

of the femoral condyles [J]. Journal of Bone and Joint Surgery, 1984, 66(9): 1340-1348.
[24] Buckwalter J A, Brown T D. Joint injury, repair, and remodeling: Roles

in post-traumatic osteoarthritis [J]. Clinical Orthopaedics and

Related Research, 2004(423): 7-16.
[25] Pena E, Calvo B, Martinez M A, et al. Effect of the size and

location of osteochondral defects in degenerative arthritis: A finite

element simulation [J]. Computers in Biology and Medicine, 2007, 37(3): 376-387.

编辑推荐 0

Metrics

阅读次数

全文

526

HTML			PDF

最新录用	在线预览	正式出版	最新录用	在线预览	正式出版
0	0	0	0	0	526

来源	本网站	其他网站

次数	5	521
比例	1%	99%

摘要

2294

最新录用	在线预览	正式出版

0	0	2294

来源	本网站	其他网站

次数	324	1970
比例	14%	86%

Accurate 3D Reconstruction of Subject-Specific Knee Finite Element Model to Simulate the
Articular Cartilage Defects

Accurate 3D Reconstruction of Subject-Specific Knee Finite Element Model to Simulate the
Articular Cartilage Defects

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐 0

Metrics

本文评价

Accurate 3D Reconstruction of Subject-Specific Knee Finite Element Model to Simulate the Articular Cartilage Defects

Accurate 3D Reconstruction of Subject-Specific Knee Finite Element Model to Simulate the Articular Cartilage Defects

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐 0

Metrics

本文评价

Accurate 3D Reconstruction of Subject-Specific Knee Finite Element Model to Simulate the
Articular Cartilage Defects

Accurate 3D Reconstruction of Subject-Specific Knee Finite Element Model to Simulate the
Articular Cartilage Defects