Journal of Shanghai Jiao Tong University

Journal of Shanghai Jiaotong University >

2023 , Vol. 57 >Issue 6: 739 - 746

DOI: https://doi.org/10.16183/j.cnki.jsjtu.2021.504

Aeronautics and Astronautics

Effect of Corner Roundedness on Capillary Flow of Liquid Propellants in Microgravity

Expand
  • 1. School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
    2. State Key Laboratory of Technologies in Space Cryogenic Propellants, Beijing 100028, China

Received date: 2021-12-10

  Revised date: 2022-01-19

  Accepted date: 2022-02-07

  Online published: 2022-09-05

Fold

Abstract

The theory of interior corner flow driven by surface tension provides an important support for design of liquid management devices in space. The flow rate, velocity, and liquid position are important factors to determine liquid management efficiency. In practice, due to machining precision or aiming to enhance the mechanical strength, the interior corner is often imperfect with a certain degree of roundedness. In this paper, the influence of corner roundedness on liquid flow characteristics is quantitatively analyzed by combining theoretical and experimental analysis. The results show that with a fixed corner roundedness, the height of liquid is always proportional to the square root of time. The velocity of capillary flow also decreases with the increase of corner roundedness. The present theoretical model is validated by the microgravity experiments based on magnetic compensation. Furthermore, the model is applied to simulate the capillary flow of liquid hydrogen and liquid oxygen. The variations of flow rate under different conditions are obtained, which provides important basic data for the design of liquid management devices for cryogenic propellant.

Key words： surface tension; interior corners; capillary driven flow; roundedness; magnetic compensation; cryogenic propellant

Cite this article

YANG Enbo, JIN Yupeng, YANG Guang, HUANG Yonghua, WANG Tianxiang, LEI Gang, WU Jingyi . Effect of Corner Roundedness on Capillary Flow of Liquid Propellants in Microgravity[J]. Journal of Shanghai Jiaotong University, 2023 , 57(6) : 739 -746 . DOI: 10.16183/j.cnki.jsjtu.2021.504

References

[1] CONCUS P, FINN R. On the behavior of a capillary surface in a wedge[J]. PNAS, 1969, 63(2): 292-299.
[2] WEISLOGEL M M, LICHTER S. Capillary flow in an interior corner[J]. Journal of Fluid Mechanics, 1998, 373: 349-378.
[3] WEISLOGEL M M, COLLICOTT S. Analysis of tank PMD rewetting following thrust resettling[C]//40th AIAA Aerospace Sciences Meeting & Exhibit. Reno, NV, USA: AIAA, 2002: AIAA 2002-0757.
[4] ENRIQUE R, WEISLOGEL M M. Gravity effects on capillary flows in sharp corners[J]. Physics of Fluids, 2009, 21(4): 1-12.
[5] WANG C X, XU S H, SUN Z W, et al. A study of the influence of initial liquid volume on the capillary flow in an interior corner under microgravity[J]. International Journal of Heat and Mass Transfer, 2010, 53(9/10): 1801-1807.
[6] 李京浩, 陈小前, 黄奕勇, 等. 微重力环境下的不对称内角流动研究[J]. 中国科学: 技术科学, 2012, 42(8): 957-962.
[6] LI Jinghao, CHEN Xiaoqian, HUANG Yiyong, et al. Study on asymmetric interior corner flow in microgravity condition[J]. Scientia Sinica (Technologica), 2012, 42(8): 957-962.
[7] 沈逸, 张泽宇, 梁益涛, 等. 磁补偿微重力环境实现及磁流体微重力内角流动研究[J]. 化工学报, 2020, 71(8): 3490-3499.
[7] SHEN Yi, ZHANG Zeyu, LIANG Yitao, et al. Realization of microgravity environment by magnetic compensation and study on interior corner flow of magnetic fluid in microgravity[J]. CIESC Journal, 2020, 71(8): 3490-3499.
[8] RANSOHOFF T C, GAUGLITZ P A, RADKE C J. Snap-off of gas bubbles in smoothly constricted noncircular capillaries[J]. AIChE Journal, 1987, 33(5): 753-765.
[9] RANSOHOFF T C, RADKE C J. Laminar flow of a wetting liquid along the cormers of a predominantly gas-occupied noncircular pore[J]. Journal of Colloid and Interface Science. 1988, 121(2): 392-401.
[10] CHEN Y K, WEISLOGEL M M, NARDIN C L. Capillary-driven flows along rounded interior corners[J]. Journal of Fluid Mechanics, 2006, 566: 235-271.
[11] ZHOU D G, BLUNT M, ORR F M. Hydrocarbon drainage along corners of noncircular capillaries[J]. Journal of Colloid and Interface Science, 1997, 187(1): 11-21.
[12] 魏月兴, 陈小前, 黄奕勇. 内角流动及其在卫星贮箱设计中的应用[J]. 中国科学: 技术科学, 2011, 41(9): 1218-1224.
[12] WEI Yuexing, CHEN Xiaoqian, HUANG Yiyong. Interior corner flow theory and its application to the satellite propellant management device design[J]. Scientia Sinica (Technologica), 2011, 41(9): 1218-1224.
[13] MAYER F J, MCGRATH J F, STEELE J W. A class of similarity solutions for the nonlinear thermal conduction problem[J]. Journal of Physics A: Mathematical and General, 1983, 16(14): 3393-3400.
[14] DONG M, CHATZIS I. The imbibition and flow of a wetting liquid along the corners of a square capillary tube[J]. Journal of Colloid and Interface Science, 1995, 172(2): 278-288.
[15] WEISLOGEL M, BUNNELL C, KURTA C, et al. Preliminary results from the capillary flow experiment aboard ISS: The moving contact line boundary condition[C]//43rd AIAA Aerospace Sciences Meeting and Exhibit. Reno, Nevada: AIAA, 2005: AIAA 2005-1439.
[16] CHEN Y K. Review of spontaneous capillary driven flow along interior corners[J]. Physics of Gases, 2017, 2(1): 21-29.
[17] 王磊, 厉彦忠, 张少华, 等. 低温推进剂空间管理技术研究进展与展望[J]. 宇航学报, 2020, 41(7): 978-988.
[17] WANG Lei, LI Yanzhong, ZHANG Shaohua, et al. Research progress and outlooks of cryogenic propellant space management technologies[J]. Journal of Astronautics, 2020, 41(7): 978-988.
[18] 陈忠灿, 李鹏, 孙培杰, 等. 工作于室温温区的热力学排气模拟与增压测试[J]. 上海交通大学学报, 2017, 51(8): 946-953.
[18] CHEN Zhongcan, LI Peng, SUN Peijie, et al. Simulation of a thermodynamic vent system working at room temperature and its preliminary pressurization testing[J]. Journal of Shanghai Jiao Tong University, 2017, 51(8): 946-953.
[19] HARTWIG J, MANN J A. Bubble point pressures of binary methanol/water mixtures in fine-mesh screens[J]. AIChE Journal, 2014, 60(2): 730-739.
[20] HARTWIG J, DARR S. Influential factors for liquid acquisition device screen selection for cryogenic propulsion systems[J]. Applied Thermal Engineering, 2014, 66(1/2): 548-562.
[21] 魏月兴. 微重力条件下航天器贮箱推进剂管理过程中的流动特性研究[D]. 长沙: 国防科学技术大学, 2013.
[21] WEI Yuexing. Research on the flow in the process of the propellant management in a spacecraft tank under microgravity[D]. Changsha: National University of Defense Technology, 2013.
[22] 张泽宇, 黄永华, 梁益涛, 等. 磁场力非均匀度对液氧磁补偿微重力自由界面的影响[J]. 真空与低温, 2019, 25(6): 372-378.
[22] ZHANG Zeyu, HUANG Yonghua, LIANG Yitao, et al. Impact of magnetic force inhomogeneity on free surface of liquid oxygen under magnetically compensated microgravity[J]. Vacuum and Cryogenics, 2019, 25(6): 372-378.
Options
Outlines

/

〈 〉