Journal of Shanghai Jiao Tong University

Journal of Shanghai Jiaotong University >

2022 , Vol. 56 >Issue 4: 422 - 430

DOI: https://doi.org/10.16183/j.cnki.jsjtu.2020.347

Naval Architecture, Ocean and Civil Engineering

In-Plane Yield Criterion of Steel-Concrete-Steel Unit Panel

Expand
  • Department of Civil Engineering, Shanghai Jiao Tong University, Shanghai 200240, China

Received date: 2020-10-23

  Online published: 2022-05-07

Fold

Abstract

A yield criterion for the steel-concrete-steel (SCS) unit panel subjected to in-plane membrane forces is proposed, which is expressed in the in-plane (principal) stress space and follows the Tresca yielding principle for steel plates. This yield criterion for the SCS unit panel is based on the Navier’s three principles (equilibrium conditions, strain compatibility, and the constitutive laws of materials). A calculation method for determining the yield load of the SCS unit in combination with the test data is proposed, and the method is applied to the bidirectional tensile and compression test of the SCS unit. By using this method, nine SCS tested panels with different steel ratios and different tension compression ratios are analyzed, and the yield criterion of the SCS unit is compared with the test results. In addition, seven SCS shear specimens tested by Ozaki are used for further verification. The results derived from the yield criterion of the SCS panel elements are found in good agreement with the test results.

Key words： steel-concrete-steel structure; in-plane stress state; mechanical analysis; yield criterion

Cite this article

HUANG Chengjun, ZHU Tianyi, SONG Xiaobing . In-Plane Yield Criterion of Steel-Concrete-Steel Unit Panel[J]. Journal of Shanghai Jiaotong University, 2022 , 56(4) : 422 -430 . DOI: 10.16183/j.cnki.jsjtu.2020.347

References

[1] 冷予冰, 宋晓冰, 葛鸿辉, 等. 钢板混凝土简支梁抗剪承载模式及承载力分析[J]. 土木工程学报, 2015, 48(7): 1-11.
[1] LENG Yubing, SONG Xiaobing, GE Honghui, et al. Study on shear resisting pattern and strength of simply supported steel-concrete-steel sandwich beams[J]. China Civil Engineering Journal, 2015, 48(7): 1-11.
[2] LENG Y B, SONG X B. Shear strength of steel-concrete-steel sandwich deep beams: A simplified approach[J]. Advances in Structural Engineering, 2019, 22(1): 42-53.
[3] SEO J, VARMA A H, SENER K, et al. Steel-plate composite (SC) walls: In-plane shear behavior, database, and design[J]. Journal of Constructional Steel Research, 2016, 119: 202-215.
[4] YAN J B, LIU X M, LIEW J Y R, et al. Steel-concrete-steel sandwich system in arctic offshore structure: Materials, experiments, and design[J]. Materials & Design, 2016, 91: 111-121.
[5] YAN J B, LIEW J Y R, ZHANG M H, et al. Experimental and analytical study on ultimate strength behavior of steel-concrete-steel sandwich composite beam structures[J]. Materials and Structures, 2015, 48(5): 1523-1544.
[6] 聂建国, 樊健生, 黄远, 等. 钢板剪力墙的试验研究[J]. 建筑结构学报, 2010, 31(9): 1-8.
[6] NIE Jianguo, FAN Jiansheng, HUANG Yuan, et al. Experimental research on steel plate shear wall[J]. Journal of Building Structures, 2010, 31(9): 1-8.
[7] 蒋亚军, 陈思佳, 黄城均, 等. 核电用双钢板-混凝土单元轴心受压组合效应[J]. 浙江大学学报(工学版), 2019, 53(4): 724-731.
[7] JIANG Yajun, CHEN Sijia, HUANG Chengjun, et al. Composite effect of steel-concrete-steel elements under axial compression for nuclear power plant[J]. Journal of Zhejiang University (Engineering Science), 2019, 53(4): 724-731.
[8] HUANG C J, CHEN S J, LENG Y B, et al. Experimental research on steel-concrete-steel sandwich panels subjected to biaxial tension compression[J]. Journal of Constructional Steel Research, 2019, 162: 105725.
[9] SONG X B, CHU M, GE H H, et al. A failure criterion for steel-concrete composite walls [C]//International Conference on Sustainable Development of Critical Infrastructure. Reston, VA, USA: American Society of Civil Engineers, 2014: 324-331.
[10] 黄城均, 宋晓冰. 双钢板混凝土组合结构平面内破坏准则研究[J]. 建筑结构, 2019, 49(4): 123-128.
[10] HUANG Chengjun, SONG Xiaobing. Study on in-plane failure criterion of steel-concrete-steel composite structures[J]. Building Structure, 2019, 49(4): 123-128.
[11] 中华人民共和国住房和城乡建设部. 核电站钢板混凝土结构技术标准: GB/T 51340-2018[S]. 北京: 中国计划出版社, 2018.
[11] Ministry of Housing and Urban-Rural Development of the People's Republic of China. Technical standard for steel plate concrete structures of nuclear power plants: GB/T 51340-2018[S]. Beijing: China Planning Press, 2016.
[12] OZAKI M, AKITA S, OSUGA H, et al. Study on steel plate reinforced concrete panels subjected to cyclic in-plane shear[J]. Nuclear Engineering and Design, 2004, 228(1): 225-244.
[13] USAMI S, AKIYAMA H, NARIKAWA M. Study on a concrete filled steel structure for nuclear plants. Part 2: Compressive loading tests on wall members[EB/OL]. (1995-08-13)[2020-09-20]. https://repository.lib.ncsu.edu/handle/1840.20/25529.
[14] 陈惠发, 萨利普A F. 混凝土和土的本构方程[M]. 余天庆. 北京: 中国建筑工业出版社, 2004.
[14] CHEN Waifa, SALIPU A F. Constitutive equations for materials of concrete and soil[M]. YU Tianqing. Beijing: China Architecture & Building Press, 2004.
[15] BELARBI A, HSU T T C. Constitutive laws of concrete in tension and reinforcing bars stiffened by concrete[J]. ACI Structural Journal, 1994, 91(4): 465-474.
Options
Outlines

/

〈 〉