Journal of Shanghai Jiao Tong University

Journal of Shanghai Jiaotong University >

2022 , Vol. 56 >Issue 1: 62 - 69

DOI: https://doi.org/10.16183/j.cnki.jsjtu.2020.326

Numerical Simulation of Stagger Spinning of Cylindrical Part with Cross Inner Ribs

Expand
  • Shanghai Key Laboratory of Digital Manufacture for Complex Thin-Walled Structures, Shanghai Jiao Tong University, Shanghai 200240, China

Received date: 2020-10-11

  Online published: 2022-01-21

Fold

Abstract

Flow spinning is an advantageous technology in forming thin-walled cylindrical parts, but for cylindrical parts with inner ribs,the height of the inner ribs that can be formed is limited. Aimed at the problem that the inner ribs are difficult to fill in such components, a numerical simulation model of staggered spinning of thin-walled cylindrical parts with cross inner ribs is established based on Abaqus, and the influence of the number of rollers on the filling of inner ribs is analyzed. The process test of the cylinder part with orthogonal inner ribs is conducted. The results show that in the staggered spinning process, increasing the number of rollers will reduce the diameter expansion of the aluminum alloy cylindrical part with inner ribs, and inhibit the axial flow of materials, leading to a higher geometric accuracy of the inner ribs. The comparison of the simulation results and the test results shows that the average error of the inner rib filling fullness of simulation result is 11.3%, and the simulation model has a good reliability.

Key words： staggered spinning; aluminum alloy; cylindrical parts with inner ribs; geometric accuracy; numerical simulation

Cite this article

ZHOU Yu, ZHAO Yong, YU Zhongqi, ZHAO Yixi . Numerical Simulation of Stagger Spinning of Cylindrical Part with Cross Inner Ribs[J]. Journal of Shanghai Jiaotong University, 2022 , 56(1) : 62 -69 . DOI: 10.16183/j.cnki.jsjtu.2020.326

References

[1] 杨合, 詹梅, 李甜, 等. 铝合金大型复杂薄壁壳体旋压研究进展[J]. 中国有色金属学报, 2011, 21(10):2534-2550.
[1] YANG He, ZHAN Mei, LI Tian, et al. Advances in spinning of aluminum alloy large-sized complicated thin-walled shells[J]. The Chinese Journal of Nonferrous Metals, 2011, 21(10):2534-2550.
[2] WANG J, GE T, LU G D, et al. A study of 3D finite element modeling method for stagger spinning of thin-walled tube[J]. Journal of Zhejiang University-SCIENCE A, 2016, 17(8):646-666.
[3] 张利鹏, 刘智冲, 周宏宇. 筒形件强力旋压发展过程及其现状分析[J]. 塑性工程学报, 2006, 13(1):43-46.
[3] ZHANG Lipeng, LIU Zhichong, ZHOU Hongyu. The development and present situation analysis of power spinning of cylinders[J]. Journal of Plasticity Engineering, 2006, 13(1):43-46.
[4] 刘若凡, 于忠奇, 赵亦希, 等. 法兰约束条件下铝合金杯形件的旋压成形性能[J]. 上海交通大学学报, 2019, 53(1):105-110.
[4] LIU Ruofan, YU Zhongqi, ZHAO Yixi, et al. Formability of flange constraint spinning for aluminum cup part[J]. Journal of Shanghai Jiao Tong University, 2019, 53(1):105-110.
[5] 翟福宝, 李帆, 张质良, 等. 筒形件错距旋压的有限元分析及其工艺优化系统[J]. 上海交通大学学报, 2002, 36(4):445-448.
[5] ZHAI Fubao, LI Fan, ZHANG Zhiliang, et al. Finite element analysis and process optimization system of the tube stagger spinning[J]. Journal of Shanghai Jiao Tong University, 2002, 36(4):445-448.
[6] 夏琴香, 杨明辉, 胡昱, 等. 杯形薄壁矩形内齿旋压成形数值模拟与试验[J]. 机械工程学报, 2006, 42(12):192-196.
[6] XIA Qinxiang, YANG Minghui, HU Yu, et al. Numerical simulation and experimentation cup-shaped thin-walled inner rectangular gear formed by spinning[J]. Chinese Journal of Mechanical Engineering, 2006, 42(12):192-196.
[7] 孙凌燕, 叶邦彦, 郝少华, 等. 杯形薄壁梯形内齿轮旋压成形的机理[J]. 华南理工大学学报(自然科学版), 2010, 38(2):49-54.
[7] SUN Lingyan, YE Bangyan, HAO Shaohua, et al. Spin-forming mechanism of cup-shaped thin-walled trapezoidal inner gear[J]. Journal of South China University of Technology (Natural Science Edition), 2010, 38(2):49-54.
[8] XU W C, ZHAO X K, SHAN D B, et al. Numerical simulation and experimental study on multi-pass stagger spinning of internally toothed gear using plate blank[J]. Journal of Materials Processing Technology, 2016, 229:450-466.
[9] JIANG S Y, REN Z Y, LI C F, et al. Role of ball size in backward ball spinning of thin-walled tubular part with longitudinal inner ribs[J]. Journal of Materials Processing Technology, 2009, 209(4):2167-2174.
[10] JIANG S Y, ZHENG Y F, REN Z Y, et al. Multi-pass spinning of thin-walled tubular part with longitudinal inner ribs[J]. Transactions of Nonferrous Me-tals Society of China, 2009, 19(1):215-221.
[11] ZENG X, FAN X G, LI H W, et al. Flow forming process of thin-walled tubular parts with cross inner ribs[J]. Procedia Manufacturing, 2018, 15:1239-1246.
[12] 朱宝行. 带网格内筋薄壁筒形件流动旋压工艺研究[D]. 上海: 上海交通大学, 2019.
[12] ZHU Baohang. Study on flow forming process of thin-walled cylindrical parts with grid inner ribs[D]. Shanghai: Shanghai Jiao Tong University, 2019.
[13] 吕伟, 詹梅, 高鹏飞, 等. 带螺旋内筋薄壁筒形件旋压内筋充填规律研究[C]// 第十六届全国塑性工程学术年会论文集. 太原: 中国机械工程学会塑性工程分会, 2019.
[13] LÜ Wei, ZHAN Mei, GAO Pengfei, et al. Study on the filling rule of flow forming of thin-walled cylindrical parts with helical inner ribs[C]// Proceedings of the 16th National Plastic Engineering Conference, Taiyuan: China Society for Technology of Plasticity, 2019.
[14] XU W C, ZHAO X K, MA H, et al. Influence of roller distribution modes on spinning force during tube spinning[J]. International Journal of Mechanical Sciences, 2016, 113:10-25.
[15] 全国钢标准化技术委员会. 金属材料拉伸试验.第1部分:室温试验方法.GB/T 228.1-2010[S]. 北京: 中国标准化研究院, 2010: 34-36.
[15] Technical Committee on Steel of Standardization Administration of China. Metallic materials—Tensile testing—Part 1: Method of test at room temperature. GB/T 228.1-2010[S]. Beijing: China National Institute of Standardization, 2010: 34-36.
Options
Outlines

/

〈 〉