In view of the influence of tooth profile parameters on the fatigue life of flexspline without considering the tooth profile parameters in the design specifications, the enveloping method is used to design the double tangent conjugate tooth profile without common tangent, and the multi-body contact finite element analysis is carried out. The response surface model of tooth profile parameter and flexspline stress is established, and the influence law of each tooth profile parameter on the flexspline stress is analyzed. The results show that the flexspline stress is more sensitive to the change of tooth profile parameters due to the deforming of the flexspline caused by the meshing teeth between the circular spline and the flexspline; the harmonic drive is more tooth meshing transmission, so the single contact tooth is less loaded and the load has less effect on the stress of the flexspline. The ratio of tooth thickness has the greatest effect on the flexspline stress. The teeth height coefficient and the root fillet radius have the second impact, and the dedendum high coefficient has the least impact. The flexspline stress decreases with the increase of root radius and root height coefficient and then increases, and the other factors are inversely proportional to the stress of the flexspline.
JIANG Qianqian,WANG Jiaxu,LI Junyang,XIAO Ke,TANG Ting,WANG Cheng
. Influence of Double Circular Arc Harmonic Transmission Profile
Parameters on Flexspline Stress[J]. Journal of Shanghai Jiaotong University, 2020
, 54(2)
: 167
-175
.
DOI: 10.16183/j.cnki.jsjtu.2020.02.008
［1］李谦, 左昱昱. 谐波减速器柔轮失效模式分析［J］. 机器人技术与应用, 2013, 4(2): 37-38.
LI Qian, ZUO Yuyu. Analysis of failure mode of flexible gear of harmonic reducer［J］. Robot Techno-logy and Application, 2013, 4(2): 37-38.
［2］伊万诺夫, 沈允文, 李克美. 谐波齿轮传动［M］. 北京: 国防工业出版社, 1987: 34-48.
IVANOV, SHEN Yunwen, LI Kemei. Harmonic gear transmission ［M］. Beijing: National Defence Industry Press, 1987: 34-48.
［3］沈允文, 叶庆泰. 谐波齿轮传动的理论和设计［M］. 北京: 机械工业出版社, 1985: 180-186.
SHEN Yunwen, YE Qingtai. Theory and design of harmonic gear transmission ［M］. Beijing: Mechanical Industry Press, 1985: 180-186.
［4］HE L, ZHOU Q, DU Y, et al. Design and finite-element analysis on double-circular-arc gear of the turbodrill reducer［J］. Advanced Materials Research, 2014, 926: 1247-1252.
［5］CHEN Y C, CHENG Y H, TSENG J T, et al. Study of a harmonic drive with involute profile flex-spline by two-dimensional finite element analysis［J］. Engineering Computations, 2017, 34(7): 10-17.
［6］DONG H, ZHU Z, ZHOU W, et al. Dynamic simulation of harmonic gear drives considering tooth profiles parameters optimization［J］. Journal of Compu-ters, 2012, 7(6): 1429-1436.
［7］ROUTH B, MAITI R, RAY A K, et al. An investigation on secondary force contacts of tooth pairs in conventional harmonic drives with involute toothed gear set［J］. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2016, 230(4): 622-638.
［8］SAHOO V, MAITI R. Load sharing by tooth pairs in involute toothed harmonic drive with conventional wave generator cam［J］. Meccanica, 2018, 53(1): 373-394.
［9］SAHOO V, MAITI R. Evidence of secondary tooth contact in harmonic drive, with involute toothed gear pair, through experimental and finite element analyses of stresses in flex-gear cup［J］. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2018, 232(2): 341-357.
［10］陈晓霞, 程凯. 基于三维实体有限元模型的谐波齿轮装配状态应力分析［J］. 天津工业大学学报, 2016, 35(5): 77-82.
CHEN Xiaoxia, CHENG Kai. Stress analysis of harmonic gear driven in assemble state with 3D solid finite element model ［J］. Journal of Tianjin Polytechnic University, 2016, 35(5): 77-82.
［11］CHEN X X, LIU S Z, XING J Z, et al. The parametric design of double-circular-arc tooth profile and its influence on the functional backlash of harmonic drive［J］. Mechanism and Machine Theory, 2014, 73(1): 1-24.
