In the profiles design of scroll compressor, aiming at the problem of low compression ratio and inadequate area utilization ratio of the orbiting and the fixed scroll in the traditional constant cross-section scroll profiles，a new type of variable cross-section scroll profiles was proposed. Scroll profiles composed of circle involutes and three-order curve were constructed piecewise by using the Frenet frame. The basic geometrical theory of the profile was established. Displacement volume, compression ratio，area utilization coefficient，axial gas force and tangential gas force were introduced to evaluate the performance of scroll profiles. The results show that the newly constructed variable cross-section scroll profiles have better geometric performance than traditional constant cross-section scroll profiles composed of the single circle involute, and the changing range of dynamic performance are small. The displacement volume, compression ratio and area utilization coefficient are improved by 8.80%, 10.57% and 8.84% respectively.
HOU Caisheng，LIU Tao
. Construction and Performance Investigation of Variable
Cross-Section Scroll Profiles Based on Frenet Frame[J]. Journal of Shanghai Jiaotong University, 2019
, 53(12)
: 1495
-1501
.
DOI: 10.16183/j.cnki.jsjtu.2019.12.013
［1］曹霞, 陈芝久, 刘振全.立式高压型涡旋压缩机摩擦副分析［J］.上海交通大学学报, 2000, 34(9): 1228-1231.
CAO Xia, CHEN Zhijiu, LIU Zhenquan. Analysis of the frictional pairs for high-side vertical scroll compressor［J］. Journal of Shanghai Jiao Tong University, 2000, 34(9): 1228-1231.
［2］IVLEV V I, MISYURIN S Y. Calculated and experimental characteristics of a scroll machine operating in the air motor mode［J］. Doklady Physics, 2017, 62(1): 42-45.
［3］LU Y, ROSKILLY A P, SMALLBONE A, et al. Design and parametric study of an organic rankine cycle using a scroll expander for engine waste heat recovery［J］. Energy Procedia, 2017, 105: 1420-1425.
［4］LIU Y, TANG Y, CHANG Y, et al. Optimum design of scroll profiles created from involute of circle with variable radii by using finite element analysis［J］. Mechanism and Machine Theory, 2012, 55(55): 1-17.
［5］LIU Y, HUNG C, CHANG Y. Study on involute of circle with variable radii in a scroll compressor［J］. Mechanism and Machine Theory, 2010, 45(11): 1520-1536.
［6］SHAFFER B R, GROLL E A. Variable wall thickness scroll geometry modeling with use of a control volume approach［J］. International Journal of Refrigeration, 2013, 36(7): 1809-1820.
［7］王君, 刘强, 曹晨燕, 等.涡旋压缩机全啮合渐变壁厚涡旋齿的设计与分析［J］.工程热物理学报, 2018, 39(8): 1713-1717.
WANG Jun, LIU Qiang, CAO Chenyan, et al. Design and analysis of completely meshing profile of tapered thickness wrap for scroll compressors［J］. Journal of Engineering Thermophysics, 2018, 39(8): 1713-1717.
［8］彭斌, 孙迎.变截面涡旋压缩机数学模型及试验研究［J］.机械工程学报, 2015, 51(14): 185-191.
PENG Bin, SUN Ying. Investigation of mathematical modeling and experiment for variable thickness scroll compressor［J］. Journal of Mechanical Engineering, 2015, 51(14): 185-191.
［9］刘涛, 邬再新, 刘振全.法向等距线法生成涡旋压缩机型线的研究［J］.机械工程学报, 2004, 40(6): 55-58.
LIU Tao, WU Zaixin, LIU Zhenquan. Study on ge-nerating profile with nomal-equidistant-curve method for scroll compressor［J］. Chinese Journal of Mechanical Engineering, 2004, 40(6): 55-58.
