An Electromagnetic Bandgap Microstrip Line Interconnection with Noise Suppression

Expand
  • Ministry of Education Key Laboratory of High-Speed Electronic System Design and Electromagnetic Compatibility, Shanghai Jiao Tong University, Shanghai 200240, China

Online published: 2019-05-28

Abstract

In this paper, a microstrip transmission line interconnection and its design method are proposed based on the electromagnetic bandgap (EBG). It has good passband transmission characteristics and stopband rejection characteristics, so it can suppress simultaneous switching noise (SSN) and keep the signal integrity. The proposed EBG microstrip line interconnection is realized with printed circuit board (PCB) and measured with network analyzer. Simulation and experimental results of the S parameter of the proposed interconnection agree very well. Besides, comparison between the proposed interconnection with EBG etched on the signal line and the microstrip line with EBG structure etched on the ground plane of the same size show that the proposed interconnection has a stronger capability of suppressing SSN and better signal integrity.

Cite this article

WANG Xiangting,LI Xiaochun,MAO Junfa . An Electromagnetic Bandgap Microstrip Line Interconnection with Noise Suppression[J]. Journal of Shanghai Jiaotong University, 2019 , 53(5) : 563 -568 . DOI: 10.16183/j.cnki.jsjtu.2019.05.008

References

[1]WU T L, CHUANG H H, WANG T K. Overview of power integrity solutions on package and PCB: Decoupling and EBG isolation [J]. IEEE Transactions on Electromagnetic Compatibility, 2010, 52(2): 346-356. [2]马晓剑, 李晓春, 王宁, 等.一种新型混合型超宽带EBG结构[J]. 微波学报, 2016, 32(2): 30-34. MA Xiaojian, LI Xiaochun, WANG Ning, et al. A novel hybrid electromagnetic bandgap structure [J]. Journal of Microwaves, 2016, 32(2): 30-34. [3]RADISIC V, QIAN Y, COCCIOLI R, et al. Novel 2-D photonic bandgap structure for microstrip lines[J]. IEEE Microwave and Guided Wave Letters, 1998, 8(2): 69-71. [4]RADISIC V, QIAN Y, ITOH T. Broad-band power amplifier using dielectric photonic bandgap structure[J]. IEEE Microwave and Guided Wave Letters, 1998, 8(1): 13-14. [5]JAGLAN N, GUPTA S D. Surface waves minimisation in microstrip patch antenna using EBG substrate[C]//International Conference on Signal Processing & Communication. Noida, India: IEEE, 2015: 116-121. [6]高强, 闫敦豹, 袁乃昌, 等. 光子带隙结构在微带带通滤波器中的应用[J]. 微波学报, 2004, 20(3): 55-57. GAO Qiang, YAN Dunbao, YUAN Naichang, et al. Application of photonic bandgap structure in micro-strip bandpass filters [J]. Journal of Microwaves, 2004, 20(3): 55-57. [7]CHUDZIK M, ARNEDO I, LUJAMBIO A, et al. Design of EBG microstrip directional coupler with high directivity and coupling[C]//Microwave Conference (EuMC), 2012 42nd European. Amsterdam, Netherlands: IEEE, 2012: 483-486. [8]HADARIG R C, COS M E D, LASHERAS F. Microstrip patch antenna bandwidth enhancement using AMC/EBG structures[J]. International Journal of Antennas & Propagation, 2012, 2012(1): 425-425. [9]ZHU H R, MAO J F. Miniaturized tapered EBG structure with wide stopband and flat passband[J]. IEEE Antennas and Wireless Propagation Letters, 2012, 11: 314-317. [10]朱浩然. CSRR和EBG结构用于高速混合电路系统噪声抑制的理论与技术[D]. 上海: 上海交通大学电子工程系, 2014. ZHU Haoran. Theory and technology of CSRR and EBG structure for noise suppression in high-speed mixed circuit system [D]. Shanghai: Shanghai Jiao Tong University, 2014. [11]POZAR D M. 微波工程[M].张肇仪,周乐柱,吴德明,译.3版. 北京: 电子工业出版社, 2015: 123-127. POZAR D M. Microwave engineering [M]. ZHANG Zhaoyi, ZHOU Lezhu, WU Deming, trans. 3rd ed. Beijing: Publishing House of Electronics Industry, 2015: 123-127.
Outlines

/