Three-dimensional numerical simulation of chip cooling radiator was carried out and the performance of four different radiators and influence of fin thickness were contrastively analyzed. Radiator model and fin thickness with better performance were also obtained. The results indicated that the heat transfer effect in both sides of radiator was better than that in the symmetrical central region, which meant that the heat transfer enhancement in the symmetrical central region should be mainly taken into account in the radiator structural design. The heat transfer coefficient of C-type and D-type radiators was obviously improved compared with A-type and B-type radiators. The temperature of substrate heating surface of C-type was much lower and the performance was better. When the fin thickness was 2mm, the cooling effect of A-type, B-type and C-type radiators was better, while the optimum value of D-type radiator was 2.5mm. 20 kinds of radiators with different structural dimensions were comprehensively analyzed in the study and the characteristics of flow and heat transfer were stated, which provided a theoretical basis and engineering guidance for the structural optimization design of chip cooling radiators.
LI Jian,LU Fanli,DONG Wei,CAI Yifan,XU Mengmei
. Structure Optimization of Chip Cooling Radiator
Based on Numerical Simulation[J]. Journal of Shanghai Jiaotong University, 2019
, 53(4)
: 461
-467
.
DOI: 10.16183/j.cnki.jsjtu.2019.04.010
［1］高翔, 凌惠琴, 李明, 等. CPU散热技术的最新研究进展［J］. 上海交通大学学报, 2007, 41(Sup.2): 48-52.
GAO Xiang, LING Huiqin, LI Ming, et al. Recent advance in cooling techniques for CPU［J］. Journal of Shanghai Jiao Tong University, 2007, 41(Sup.2): 48-52.
［2］CORMIER Y, DUPUIS P, FARJAM A, et al. Additive manufacturing of pyramidal pin fins: Height and fin density effects under forced convection［J］. International Journal of Heat and Mass Transfer, 2014, 75: 235-244.
［3］CUI Z. Effect of heat sink structure improvement on heat dissipation performance in high heat flux［C］//5th International Conference on Micro/Nanoscale Heat and Mass Transfer. Singapore: ASME, 2016: MNHMT2016-6726.
［4］DESHMUKH P A, WARKHEDKAR R M. Thermal performance of elliptical pin fin heat sink under combined natural and forced convection［J］. Experimental Thermal and Fluid Science, 2013, 50: 61-68.
［5］KOTCIOGLU I, KHALLAJI N, UURLU A. Numerical analysis in a rectangular duct heat exchanger with heat sink plate-fins using CFD［EB/OL］. ［2017-08-26］. http://www.researchgate.net.
［6］KOTCIOGLU I, CANSIZ A, KHALAJI M N. Experimental investigation for optimization of design parameters in a rectangular duct with plate-fins heat exchanger by Taguchi method［J］. Applied Thermal Engineering, 2013, 50(1): 604-613.
［7］RAVIKUMAR S, CHANDRA P S, HARISH R, et al. Experimental and transient thermal analysis of heat sink fin for CPU processor for better perfor-mance［J］. IOP Conference Series: Materials Science and Engineering, 2017, 197(1): 012085.
［8］陆正裕, 熊建银, 屈治国, 等. CPU散热器换热特性的实验研究［J］. 工程热物理学报, 2004, 25(5): 861-863.
LU Zhengyu, XIONG Jianyin, QU Zhiguo, et al. An experiment study on two kinds of heat sinks of CPU［J］. Journal of Engineering Thermophysics, 2004, 25(5): 861-863.
［9］赵明, 卞恩杰, 杨茉, 等. 风扇结构和肋高对芯片散热器散热性能的影响［J］. 流体机械, 2013, 41(12): 60-64.
ZHAO Ming, BIAN Enjie, YANG Mo, et al. Influence of fan structure and rib height for the perfor-mance of chip radiator［J］. Fluid Machinery, 2013, 41(12): 60-64.
［10］王海民, 王喜芳, 魏辉, 等. 针肋散热器针径和间距对性能影响分析［J］. 热科学与技术, 2016, 15(6): 505-509.
WANG Haimin, WANG Xifang, WEI Hui, et al. Analysis of diameter and spacing of pins on characte-ristic of pin-finned heat radiators［J］. Journal of Thermal Science and Technology, 2016, 15(6): 505-509.
［11］李燚, 张永恒. CPU散热器换热特性的数值研究［J］. 制冷与空调, 2007, 21(4): 98-100.
LI Yi, ZHANG Yongheng. The numerical simulation of one radiator structure［J］. Refrigeration and Air Conditioning, 2007, 21(4): 98-100.
［12］张远波. 风冷式CPU散热片的热分析及其优化设计［D］. 武汉: 华中科技大学, 2006.
ZHANG Yuanbo. Research on thermal analysis and optimization of air-cooled heat sinks［D］. Wuhan: Huazhong University of Science and Technology, 2006.
［13］胡艳, 郭广思, 尚新泉. CPU散热器数值模拟分析［J］. 低温与超导, 2009, 37(9): 60-65.
HU Yan, GUO Guangsi, SHANG Xinquan. Simulation of heat transfer in the CPU ribbed radiator［J］. Cryogenics and Superconductivity, 2009, 37(9): 60-65.
［14］伊丽娜, 郑文龙, 王博杰, 等. 新型CPU散热器内空气流动与换热特性的数值研究［J］. 制冷技术, 2015, 35(1): 36-40.
YI Lina, ZHENG Wenlong, WANG Bojie, et al. Numerical study on flow and heat transfer characte-ristics of air in a new CPU heat sink［J］. Chinese Journal of Refrigeration Technology, 2015, 35(1): 36-40.
