Based on the working principle of vehicle disc brake system, a reduced disc brake dynamometer test bench was developed. An experimental study of brake vibration and noise was performed in this self-developed disc brake dynamometer. Moreover, a numerical analysis was performed by using Abaqus/Explicit to simulate the experimental process and investigate the relationship among the friction heat, interfacial wear and system stability. Both the experimental and numerical results showed that the friction system of brake pad on disc generated intermittent high frequency vibration and squeal noise during the friction process. The contact pressure of brake pad concentrated on the leading and trailing areas of the pad surface, which resulted in the high temperature and consequently local severe wear of these areas. Moreover, the vibration amplitude for the finite element model with thermal effect was lower compared to the model without thermal effect.
MO Jiliang,WANG Dongwei,LI Jianxi,LI Zhen,ZHU Minhao,ZHOU Zhongrong
. Effect of Friction Heat on Interfacial Wear and Brake System Stability[J]. Journal of Shanghai Jiaotong University, 2018
, 52(5)
: 624
-630
.
DOI: 10.16183/j.cnki.jsjtu.2018.05.019
［1］KCHAOUA M, LAZIM A R M, HAMID M K A, et al. Experimental studies of friction-induced brake squeal: Influence of environmental sand particles in the interface brake pad-disc［J］. Tribology International, 2017, 110: 307-317.
［2］WANG D W, MO J L, LIU M Q, et al. Improving tribological behaviours and noise performance of railway disc brake by grooved surface texturing［J］. Wear, 2017, 376/377: 1586-1600.
［3］BARTOLOMEO M D, LACERRA G, BAILLET L, et al. Parametrical experimental and numerical analysis on friction-induced vibrations by a simple frictional system［J］. Tribology International, 2017, 112: 47-57.
［4］SHPENEV A G, KENIGFEST A M, GOLUBKOV A K. Theoretical and experimental study of carbon brake discs frictionally induced thermoelastic instability［J］. Advanced Materials, 2016, 175: 551-559.
［5］张谦, 常保华, 王力, 等. 高速列车锻钢制动盘温度场特征的实验研究［J］. 中国铁道科学, 2007, 28(1): 8-15.
ZHANG Qian, CHANG Baohua, WANG Li, et al. China railway science experimental studies on the characteristics of temperature field on forged steel brake discs of high speed trains［J］. China Railway Science, 2007, 28(1): 8-15.
［6］PALIWAL M, MAHAJAN A, DON J, et al. Noise and vibration analysis of a disc-brake system using a stick-slip friction model involving coupling stiffness［J］. Journal of Sound and Vibration, 2005, 282(3): 1273-1284.
［7］OUYANG H, ABUBAKAR A R, LI L J. A combined analysis of heat conduction, contact pressure and transient vibration of a disk brake［J］. International Journal of Vehicle Design, 2009, 51(1/2): 190-206.
［8］王晔, 燕青芝, 张肖路, 等. 铜粉对铜基摩擦材料性能的影响［J］. 材料研究学报, 2013, 27(1): 37-42.
WANG Ye, YAN Qingzhi, ZHANG Xiaolu, et al. Effect of copper powders on properties of Cu-based friction material［J］. Chinese Journal of Materials Research, 2013, 27(1): 37-42.
［9］张森, 肖林京, 刘强, 等. 汽车通风盘式制动器的摩擦学性能测试和流固热耦合仿真［J］. 汽车工程, 2017, 39(6): 675-682.
ZHANG Sen, XIAO Linjing, LIU Qiang, et al. Tribology performance testing and fiuld-solid-heat coupling simulation of automotive ventilated disc brake［J］. Automotive Engineering, 2017, 39(6): 675-682.
［10］吕红明, 张立军, 余卓平. 接触表面不平度对摩擦尖叫噪声的影响［J］. 摩擦学学报, 2011, 31(5): 473-479.
L Hongming, ZHANG Lijun, YU Zhuoping. Effects of surface roughness on the friction-induced squeal noise［J］. Tribology, 2011, 31(5): 473-479.
