上海交通大学学报

上海交通大学学报 >

2024 , Vol. 58 >Issue 8: 1139 - 1147

DOI: https://doi.org/10.16183/j.cnki.jsjtu.2023.076

机械与动力工程

次级燃烧对轴向分级燃烧室燃烧特性影响的试验研究

  • 隋永枫 ,
  • 张宇明 ,
  • 臧鹏 ,
  • 贾玉良 ,
  • 衡思江 ,
  • 傅燕妮 ,
  • 葛冰
展开
  • 1.浙江燃创透平机械有限公司,杭州 310022
    2.上海交通大学 机械与动力工程学院,上海 200240
    3.杭州汽轮动力集团股份有限公司,杭州 310022
隋永枫(1978-),教授级高级工程师,从事动力机械开发相关研究.
葛 冰,副研究员,博士生导师,电话(Tel.):021-34206709;E-mail:Gebing@sjtu.edu.cn.

收稿日期: 2023-03-06

  修回日期: 2023-04-17

  录用日期: 2023-05-18

  网络出版日期: 2023-05-31

基金资助

浙江省领雁攻关计划(2022C01117)

收起

Experimental Study of Influence of Secondary Combustion on Combustion Characteristics of Axial Staged Combustor

  • SUI Yongfeng ,
  • ZHANG Yuming ,
  • ZANG Peng ,
  • JIA Yuliang ,
  • HENG Sijiang ,
  • FU Yanni ,
  • GE Bing
Expand
  • 1. Zhejiang Rancon Turbine Machinery Co., Ltd., Hangzhou 310022, China
    2. School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
    3. Hangzhou Steam Turbine Co., Ltd., Hangzhou 310022, China

Received date: 2023-03-06

  Revised date: 2023-04-17

  Accepted date: 2023-05-18

  Online published: 2023-05-31

Fold

摘要

为了获得燃气轮机轴向分级燃烧室非预混燃烧模式下次级燃烧对排放和燃烧振荡特性的影响规律,探索燃料轴向分级条件下稳定低排放的升负荷方式,选用某型F级燃气轮机轴向分级燃烧室开展试验研究.试验结果表明:较低燃烧室出口温度下加入次级燃料会抑制CO的消耗,导致CO排放急剧增加;次级燃料的加入以及次级当量比的增高会导致NOx排放降低,但负荷增加会削弱次级燃烧降低NOx排放的能力.次级燃料的加入以及次级当量比的增高会抑制较低频带(75~90 Hz)内的燃烧振荡;当次级当量比高于阈值(0.19)时,次级燃料的加入才会对较高频带(175~210 Hz)内的燃烧振荡起到抑制效果.此外,综合考虑次级燃烧对排放和燃烧振荡影响规律,获得了轴向分级燃烧室在较高负荷区间(20%~50%负荷)内的低排放、稳定燃烧的运行范围和升负荷方式,为机组升负荷过程中的稳定低排放运行提供参考.

关键词： 轴向分级燃烧室; 非预混燃烧模式; 次级燃烧; 排放; 燃烧振荡

本文引用格式

隋永枫 , 张宇明 , 臧鹏 , 贾玉良 , 衡思江 , 傅燕妮 , 葛冰 . 次级燃烧对轴向分级燃烧室燃烧特性影响的试验研究[J]. 上海交通大学学报, 2024 , 58(8) : 1139 -1147 . DOI: 10.16183/j.cnki.jsjtu.2023.076

Abstract

In order to obtain the influencing rule of secondary combustion on emissions and combustion oscillation characteristics of gas turbine axial staged combustor in non-premixed combustion mode and explore a load increasing mode with stable low emission, an axial staged combustor for F-class gas turbines is selected for experimental study. The results show that CO consumption is restrained and CO emission increases sharply when secondary fuel is added at a lower combustor outlet temperature. The addition of secondary fuel and the increase of secondary equivalence ratio lead to the reduction of NOx emission, but the increase of load can weaken the ability of secondary fuel to reduce NOx emission. The addition of secondary fuel and the increase of secondary equivalence ratio restrain the combustion oscillation in the low frequency band (75—90 Hz). When the secondary equivalence ratio is higher than a certain threshold (0.19), the addition of secondary fuel can restrain higher frequency(175—210 Hz) combustion oscillation. In addition, by comprehensively considering the influence of secondary combustion on emissions and combustion oscillation, the operating range and load increasing mode of low emissions and stable combustion of axial staged combustor in the higher load range (20%—50% load) are obtained, which provides a reference for stable low emission operation of the unit during load increasing.

Key words： axial staged combustor; non-premixed combustion mode; secondary combustion; emission; combustion oscillation

参考文献

[1] WINKLER D, GENG W, ENGELBRECHT G, et al. Staged combustion concept for gas turbine[J]. Journal of the Global Power and Propulsion Society, 2017(1): 184-194.
[2] 郑祥龙. 燃料轴向分级燃烧污染物排放及其交叉射流火焰特性研究[D]. 北京: 中国科学院大学, 2020.
  ZHENG Xianglong. Investigations on pollutant emissions of the axial-fuel-staged combustion and characteristics of the jet-in-crossflow flames[D]. Beijing: University of Chinese Academy of Sciences, 2020.
[3] 王子叶. 天然气轴向分级预混燃烧特性研究[D]. 北京: 中国科学院大学, 2019.
  WANG Ziye. Emissions characteristics of axial fuel staged combustor for gas turbine applications[D]. Beijing: University of Chinese Academy of Sciences, 2019.
[4] ROMOSER C E, HARPER J, WILSON M B, et al. E-class late fuel staging technology delivers flexibility leap[C]//Proceedings of ASME Turbo Expo 2016:Turbomachinery Conference and Exposition. Seoul, South Korea: ASME, 2016: 1-9.
[5] YAMADA H H. NOx emissions in combustion of lean premixed mixtures injected into hot burned gas[J]. Proceedings of the Combustion Institute, 2000, 28(2): 2443-2449.
[6] TOMMY G, MICHELLE O, ANTHONY M, et al. Preheating and premixing effects on NOx emissions in a high-pressure axially staged combustor[J]. Combustion and Flame, 2022, 235(C): 1-10.
[7] HIRANO K, NONAKA Y, KINOSHITA Y, et al. Large-eddy simulation of turbulent combustion in multi combustors for L30A gas turbine engine[C]//Proceedings of the ASME Turbo Expo 2015:Turbine Technical Conference and Exposition. Montreal, Quebec, Canada: ASME, 2015: 1-8.
[8] KARIM H, NATARAJAN J, NARRA V, et al. Staged combustion system for improved emissions operability and flexibility for 7HA class heavy duty gas turbine engine[C]//Proceedings of ASME Turbo Expo 2016:Turbomachinery Conference and Exposition. Charlotte, North Carolina, USA: ASME, 2017: 1-10.
[9] PENNELL D A, BOTHIEN M R, CIANI A, et al. An introduction to the Ansaldo GT36 constant pressure sequential combustor[C]//Proceedings of the ASME Turbo Expo 2017:Turbomachinery Technical Conference and Exposition. Charlotte, North Carolina, USA: ASME, 2017: 1-11.
[10] ZHENG X L, XIONG Y, LEI F L, et al. Experimental study on the emissions characteristics of a premixed axial-fuel-staged model combustor[J]. Journal of Engineering for Gas Turbines and Power, 2019, 142(3): 031002.
[11] AHRENS D, KOLB M, HIRSCH C, et al. Influence of preflame and postflame mixing on NOx formation in a reacting premixed jet in hot cross flow[J]. Journal of Engineering for Gas Turbines and Power, 2016, 138(8): 1-10.
[12] AHRENS D. NOx-formation in a reacting premixed jet in hot cross flow[D]. Munich, Germany: Technical University Munich, 2015.
[13] SATTELMAYER T, POLIFKE W, WINKLER D, et al. NOx-abatement potential of lean-premixed GT-combustors[J]. Journal of Engineering for Gas Turbines and Power, 1998, 120(1): 48-59.
[14] GOH E, SIRIGNANO M, NAIR V, et al. Modeling of minimum NOx in staged-combustion architectures at elevated temperatures[C]//Proceedings of the ASME Turbo Expo 2017:Turbomachinery Technical Conference and Exposition. Charlotte, North Carolina, USA: ASME, 2017: 1-8.
[15] 钱凯文, 朱民, 李苏辉, 等. 燃气轮机分级燃烧室NOx排放动力学模拟研究[J]. 动力工程学报, 2019, 39(1): 33-40.
  QIAN Kaiwen, ZHU Min, LI Suhui, et al. A kinetics study on NOx emission of an axially-staged gas turbine combustor[J]. Journal of Power Engineering, 2019, 39(1): 33-40.
[16] GOH E, SIRIGNANO M, LI J, et al. Prediction of minimum achievable NO levels for fuel-staged combustors[J]. Combustion and Flame, 2019, 200(2): 276-285.
[17] 赵文华. 双级贫预混火焰的层流火焰结构及燃烧特性研究[D]. 哈尔滨: 哈尔滨工业大学, 2020.
  ZHAO Wenhua. Research on structure and combustion characteristics of laminar dual-stage lean premixed flames[D]. Harbin:Harbin Institute of Technology, 2020.
[18] POINSOT T. Prediction and control of combustion instabilities in real engines[J]. Proceedings of the Combustion Institute, 2017, 36(1): 1-28.
[19] 唐豪杰, 朱鼎. 燃气轮机燃烧振荡问题及防治技术开发[J]. 东方电气评论, 2016, 30(4): 74-84.
  TANG Haojie, ZHU Ding. Combustion oscillation and control technology for gas turbine[J]. Dongfang Electric Review, 2016, 30(4): 74-84.
[20] SCHULZ O, DOLL U, EBI D, et al. Thermoacoustic instability in a sequential combustor: Large eddy simulation and experiments[J]. Proceedings of the Combustion Institute, 2019, 37(4): 5325-5332.
[21] SCHULZ O, NOIRAY N. Autoignition flame dynamics in sequential combustors[J]. Combustion and flame, 2017, 192: 86-100.
[22] 李苏辉, 张归华, 吴玉新. 面向未来燃气轮机的先进燃烧技术综述[J]. 清华大学学报(自然科学版), 2021, 61(12): 1423-1437.
  LI Suhui, ZHANG Guihua, WU Yuxin. Advanced combustion technologies for future gas turbines[J]. Journal of Tsinghua University (Natural Science Edition), 2021, 61(12): 1423-1437.
[23] 朱旭彤, 张亮, 葛冰, 等. 旋流间距及空气分配对富油/焠熄/贫油燃烧室温度和排放的影响[J]. 燃烧科学与技术, 2021, 27(4): 416-423.
  ZHU Xutong, ZHANG Liang, GE Bing, et al. Influence of swirler spacing and air distribution on temperature and emission of rich/quench/lean combustors[J]. Journal of Combustion Science and Technology, 2021, 27(4): 416-423.
[24] 董德伟, 李建中, 陈坚, 等. 基于RQL燃烧高温升燃烧室淬熄区混合特性研究[J]. 南京航空航天大学学报, 2020, 52(4): 548-558.
  DONG Dewei, LI Jianzhong, CHEN Jian, et al. Research on mixing performance in quenching zone of high temperature rise combustor based on RQL combustion[J]. Journal of Nanjing University of Aeronautics and Astronautics, 2020, 52(4): 548-558.
[25] CHEN J, LI J, YUAN L, et al. Flow and flame characteristics of a RP-3 fueled high temperature rise combustor based an RQL[J]. Fuel, 2019, 235(1): 1159-1171.
[26] DATTON J W, KYLE L, BAKI M C. Ignition and flame stabilization of a premixed reacting jet in vitiated crossflow[J]. Proceedings of the Combustion Institute, 2019, 37(2): 2417-2424.
[27] 刘贵军, 钱凯文, 李苏辉. 高温富氧空气下燃料射流自点火及火焰特性研究[J]. 燃烧科学与技术, 2021, 27(4): 405-411.
  LIU Guijun, QIAN Kaiwen, LI Suhui. Autoignition and flame lift-off characteristics of fuel jet with hot oxygen-enriched coflow air[J]. Journal of Combustion Science and Technology, 2021, 27(4): 405-411.
Options
文章导航

/

〈 〉