收稿日期: 2020-11-20
网络出版日期: 2021-12-03
基金资助
国家自然科学基金项目(U1860110);国家重点研发计划项目(2020YFB2010300)
Crystal Plasticity Modeling of Tension Process of QP980 Steel
Received date: 2020-11-20
Online published: 2021-12-03
淬火配分QP980钢变形过程中存在马氏体相变,对材料的力学性能产生明显影响.通过电子背散射衍射方法表征了QP980钢变形前后的微观组织,基于马氏体相变晶体学唯象理论建立了考虑相变的弹-黏塑性自洽多晶体塑性模型,模拟了QP980钢在单向拉伸过程中的宏观流动应力和织构演化.材料初始包含铁素体(F)、马氏体和残余奥氏体(RA),各相均为轧制织构,变形后残余奥氏体含量明显减少,残余奥氏体的<111>丝织构、铁素体和马氏体的<110>丝织构在拉伸方向有明显增强.相变提高了材料的强度和加工硬化率,但对各相的织构演化影响很小.根据计算变形过程中应变和应力的分配情况,铁素体和回火马氏体对变形起主要作用,变形过程中新生马氏体的应力最大,成为断裂的潜在萌生点.
杨浩, 汪华苗, 李大永 . QP980钢拉伸过程的晶体塑性模拟[J]. 上海交通大学学报, 2021 , 55(11) : 1476 -1482 . DOI: 10.16183/j.cnki.jsjtu.2020.391
The mechanical behavior of the quenching and partitioning 980 (QP980) steel is affected by martensitic transformation during deformation. The microstructure of QP980 steel before and after deformation is characterized by using the electron backscattered diffraction (EBSD) method. An elastic visco-plastic self-consistent (EVPSC) polycrystalline model considering phase transformation is established based on the phenomenological theory of martensite crystallography (PTMC). The macroscopic flow stress as well as texture evolution of QP980 steel during uniaxial tension process is reproduced by the model. The material consists of ferrite (F), martensite, and retained austenite (RA) with rolling texture in the initial state. After deformation, the content of RA decreases and the <111> fiber of the RA, the <110> fiber of the ferrite and martensite along the tensile direction are enhanced. Phase transformation enhances the strength and work hardening rate but has little effect on the texture evolution. According to the distribution of stress and strain during the calculation of deformation, ferrite and tempered martensite (TM) contribute most to the deformation, and the new martensite (NM) is the most probable nucleation sites of fracture due to its highest average stress.
| [1] | MATLOCK D K, SPEER J G. Third generation of AHSS: Microstructure design concepts, microstructure and texture in steels[M]. London: Springer, 2009. |
| [2] | WANG L, SPEER J G. Quenching and partitioning steel heat treatment[J]. Metallography, Microstructure, and Analysis, 2013, 2(4):268-281. |
| [3] | INAM A, IMTIAZ Y, HAFEEZ M A, et al. Effect of tempering time on microstructure, mechanical, and electrochemical properties of quenched-partitioned-tempered advanced high strength steel (AHSS)[J]. Materials Research Express, 2019, 6(12):126509. |
| [4] | LI Z, KIRAN R, HU J, et al. Analysis and design of a three-phase TRIP steel microstructure for enhanced fracture resistance[J]. International Journal of Fracture, 2020, 221(1):53-85. |
| [5] | CHENG G, CHOI K S, HU X, et al. Determining individual phase properties in a multi-phase Q&P steel using multi-scale indentation tests[J]. Materials Science and Engineering: A, 2016, 652:384-395. |
| [6] | SRIVASTAVA A, GHASSEMI-ARMAKI H, SUNG H, et al. Micromechanics of plastic deformation and phase transformation in a three-phase TRIP-assisted advanced high strength steel: Experiments and modeling[J]. Journal of the Mechanics and Phy-sics of Solids, 2015, 78:46-69. |
| [7] | HU X H, CHOI K S, SUN X, et al. Determining individual phase flow properties in a quench and partitioning steel with in situ high-energy X-ray diffraction and multiphase elasto-plastic self-consistent method[J]. Metallurgical and Materials Transactions A, 2016, 47(12):5733-5749. |
| [8] | YANG H, WANG H M, YANG Z L, et al. In situ neutron diffraction and crystal plasticity analysis on Q&P1180 steel during plastic deformation[J]. Materials Science and Engineering: A, 2021, 802:140425. |
| [9] | ZOU D Q, LI S H, HE J. Temperature and strain rate dependent deformation induced martensitic transformation and flow behavior of quenching and partitioning steels[J]. Materials Science and Engineering: A, 2017, 680:54-63. |
| [10] | ZOU D, LI S, HE J, et al. The deformation induced martensitic transformation and mechanical behavior of quenching and partitioning steels under complex loading process[J]. Materials Science and Engineering: A, 2018, 715:243-256. |
| [11] | HE J, HAN G F, LI S H, et al. To correlate the phase transformation and mechanical behavior of QP steel sheets[J]. International Journal of Mechanical Sciences, 2019, 152:198-210. |
| [12] | HU X H, SUN X, HECTOR L G, et al. Individual phase constitutive properties of a TRIP-assisted QP980 steel from a combined synchrotron X-ray diffraction and crystal plasticity approach[J]. Acta Materialia, 2017, 132:230-244. |
| [13] | MOHAMMED B, PARK T, POURBOGHRAT F, et al. Multiscale crystal plasticity modeling of multiphase advanced high strength steel[J]. International Journal of Solids and Structures, 2018, 151:57-75. |
| [14] | LEBENSOHN R A, TOMÉ C N. A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys[J]. Acta Metallurgica et Materialia, 1993, 41(9):2611-2624. |
| [15] | WANG H, WU P D, TOMÉ C N, et al. A finite strain elastic-viscoplastic self-consistent model for polycrystalline materials[J]. Journal of the Mechanics and Physics of Solids, 2010, 58(4):594-612. |
| [16] | TOME C, CANOVA G R, KOCKS U F, et al. The relation between macroscopic and microscopic strain hardening in F.C.C. polycrystals[J]. Acta Metallurgica, 1984, 32(10):1637-1653. |
| [17] | WECHSLER M S, LIEBERMAN D S, READ T A. On the theory of the formation of martensite[J]. Trans AIME, 1953, 197:1503-1515. |
| [18] | BOWLES J S, MACKENZIE J K. The crystallography of martensite transformations I[J]. Acta Metallurgica, 1954, 2(1):129-137. |
| [19] | MACKENZIE J K, BOWLES J S. The crystallography of martensite transformations II[J]. Acta Metallurgica, 1954, 2(1):138-147. |
| [20] | WAYMAN C. Introduction to the crystallography of martensitic transformations[M]. London: Macmillan, 1964. |
| [21] | WANG H, JEONG Y, CLAUSEN B, et al. Effect of martensitic phase transformation on the behavior of 304 austenitic stainless steel under tension[J]. Materials Science and Engineering: A, 2016, 649:174-183. |
| [22] | BHADESHIA H. Geometry of crystals[M]. London: University of Cambridge, 2001. |
| [23] | OLSON G B, COHEN M. Kinetics of strain-induced martensitic nucleation[J]. Metallurgical Transactions A, 1975, 6(4):791-795. |
| [24] | WOO W, EM V T, KIM E Y, et al. Stress-strain relationship between ferrite and martensite in a dual-phase steel studied by in situ neutron diffraction and crystal plasticity theories[J]. Acta Materialia, 2012, 60(20):6972-6981. |
/
| 〈 |
|
〉 |
