上海交通大学学报

上海交通大学学报 >

2021 , Vol. 55 >Issue 7: 826 - 833

DOI: https://doi.org/10.16183/j.cnki.jsjtu.2020.279

双向抗高过载微流体惯性开关

展开
  • 南京理工大学 机械工程学院, 南京 210094
张润铎(1997-),男,河南省许昌市人,硕士生,主要从事智能探测与控制研究

收稿日期: 2020-09-08

  网络出版日期: 2021-07-30

基金资助

重点实验室基金资助项目(6142601060204)

收起

Microfluidic Inertial Switch Capable of Bidirectional Anti-High Overload

Expand
  • School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China

Received date: 2020-09-08

  Online published: 2021-07-30

Fold

摘要

为实现微流体惯性开关在智能弹药引信系统中的应用,提出一种双向抗高过载微流体惯性开关,解决高冲击作用下由水银液滴分离造成的开关接触不稳定问题.基于微通道内水银液滴所受毛细力原理,设计蛇形缓冲通道与三级毛细阀结构.分析收缩型毛细阀与扩张型毛细阀中水银液滴的受力状态,建立矩形截面通道中水银液滴的静态阈值模型;采用用户定义函数(UDF)施加加速度载荷对开关进行有限元仿真.通过仿真分析可知,该惯性开关在典型正向勤务跌落载荷与典型反向勤务跌落载荷作用下,水银液滴可恢复至初始状态,不会产生液滴分离现象,表明开关具备可靠的抗高过载能力.采用两次离心试验完成微小水银液滴的制备与注液,对所制作的微流体开关样机进行Machete落锤冲击试验.试验结果表明:开关在典型正向冲击载荷与典型反向冲击载荷作用后,水银液滴未发生液滴分离现象,与仿真结果一致.

关键词： 微流体惯性开关; 微加速度开关; 毛细力; 抗高过载

本文引用格式

张润铎, 聂伟荣, 丘伟祥 . 双向抗高过载微流体惯性开关[J]. 上海交通大学学报, 2021 , 55(7) : 826 -833 . DOI: 10.16183/j.cnki.jsjtu.2020.279

Abstract

In order to realize the stable application of microfluidic inertial switch in the intelligent ammunition fuze system, a bidirectional anti-high overload microfluidic inertial switch is proposed to solve the problem of switch contact instability caused by the mercury droplet separation under high impact. The structures of snake-shaped buffer channel and three-stage capillary valve are designed based on the principle of capillary force applied to the mercury droplet in microchannel. The force state of the mercury droplets in the contraction type and the expansion type of capillary valves is analyzed. The static threshold model of the mercury droplet in the rectangular channel is established. The user defined function (UDF) is used to apply acceleration load to the finite element simulation of the switch. The simulation analysis suggests that under the action of typical forward service drop load and typical reverse service drop load, the mercury droplets can be restored to its initial state without droplet separation, indicating that the switch has a reliable anti-high overload ability. Two centrifugal experiments are conducted to complete the preparation and injection of tiny mercury droplets. The microfluidic switch prototype is used in the impact test of the Machete drop hammer. The results show that the mercury droplet separation does not occur in the switch under the action of typical forward impact load and typical reverse impact load, which are consistent with the simulation results.

Key words： microfluidic inertial switch; micro-acceleration switch; capillary force; anti-high overload

参考文献

[1] 范晨阳, 刘剑霏, 田中旺. 基于动电极翻转的MEMS万向惯性开关[J]. 探测与控制学报, 2019, 41(3): 76-80.
[1] FAN Chenyang, LIU Jianfei, TIAN Zhongwang. MEMS omnidirectional inertial switch based on moving electrodeove overturning[J]. Journal of Detection & Control, 2019, 41(3): 76-80.
[2] 孔南, 席占稳, 聂伟荣, 等. 可识别载荷方位区间的MEMS万向惯性开关[J]. 探测与控制学报, 2017, 39(2): 13-18.
[2] KONG Nan, XI Zhanwen, NIE Weirong, et al. MEMS omni-directional inertial switch with load azimuth interval identify[J]. Journal of Detection & Control, 2017, 39(2): 13-18.
[3] LI J, WANG Y, LI Y, et al. A contact-enhanced MEMS inertial switch with electrostatic force assistance and multi-step pulling action for prolonging contact time[J]. Microsystem Technologies, 2018, 24(7): 3179-3191.
[4] 黄刘, 聂伟荣, 王晓锋, 等. 抗高过载微流体惯性开关[J]. 光学精密工程, 2016, 24(3): 526-532.
[4] HUANG Liu, NIE Weirong, WANG Xiaofeng, et al. A microfluidic inertial switch with response characteristics to high acceleration[J]. Optics and Precision Engineering, 2016, 24(3): 526-532.
[5] LI J J, NIE W R, LIU G W. Microfluidic inertial switch based on J-shape communicating vessels[J]. Microsystem Technologies, 2019, 25(3): 917-923.
[6] SHEN T, LI J J, HUANG L, et al. Dynamic flow characteristics in U-type anti-high overload microfluidic inertial switch[J]. Microfluidics and Nanofluidics, 2019, 23(3): 1-14.
[7] SHEN T, ZHANG D X, HUANG L, et al. An automatic-recovery inertial switch based on a gallium-indium metal droplet[J]. Journal of Micromechanics and Microengineering, 2016, 26(11): 115016.
[8] XU H Y, ZHAO Y L, ZHANG K, et al. A capacitive MEMS inclinometer sensor with wide dynamic range and improved sensitivity[J]. Sensors, 2020, 20(13): 3711.
[9] NIE W R, LIU G W, ZHANG R D. Microfluidic inertial switch with delay response characteristics[J]. Journal of Physics: Conference Series, 2020, 1507:102001.
[10] 李嘉杰, 聂伟荣, 刘国伟. 高阈值长脉宽响应的微流体惯性开关[J]. 光学精密工程, 2019, 27(1): 101-109.
[10] LI Jiajie, NIE Weirong, LIU Guowei. Microfluidic inertial switch with high threshold and long pulse-width response[J]. Optics and Precision Engineering, 2019, 27(1): 101-109.
[11] HUANG L, NIE W R, WANG X F, et al. Feature coefficient prediction of micro-channel based on artificial neural network[J]. Microsystem Technologies, 2017, 23(6): 2297-2305.
[12] SHEN T, HUANG L, WANG J. Analysis and experiment of transient filling flow into a rectangular microchannel on a rotating disk[J]. Microfluidics and Nanofluidics, 2016, 20(4): 1-12.
[13] 张伟锋. 石英MEMS传感器湿法刻蚀工艺及设备制造技术研究[J]. 电子工业专用设备, 2020, 49(2): 29-33.
[13] ZHANG Weifeng. Research on wet etching process and equipment manufacturing technology of quartz MEMS sensor[J]. Equipment for Electronic Products Manufacturing, 2020, 49(2): 29-33.
[14] EHIASARIAN A P. High-power impulse magnetron sputtering and its applications[J]. Pure and Applied Chemistry, 2010, 82(6): 1247-1258.
Options
文章导航

/

〈 〉