构建了平板型双流道太阳能空气集热器，提出了安装开孔型扰流板的结构优化方案，将该方案与安装平面无孔式扰流板及无扰流板集热器进行了对比分析.结果表明，安装平面无孔式扰流板后，集热器背部区域会形成局部空气流动死区，而安装开孔型扰流板可以破坏和抑制流动死区的形成，从而提高集热器的集热效率和热性能.相比未安装扰流板的原始模型，安装扰流板后集热效率由53.4%增加到67.9%.
A flat plate solar air collector with double channels is established. The optimization schemes with perforated baffles are proposed. The thermal performance of optimized collector is anlyzed and compared with the commom plane baffle and non-baffle types. The results show that flow dead zones in back of baffles appear generally. The solar air collector with perforated baffles has a higher collector efficiency and thermal perfromance because of the forceful destabilization of flow dead zone. Compared with the model without baffles, the collecor efficiency increases from 53.4% to 67.9%.
［1］郭超, 马进伟, 何伟. 平板型太阳能双效集热器空气热性能的理论分析［J］. 安徽建筑工业学院学报, 2013, 21(5): 100-103.
GUO Chao, MA Jinwei, HE Wei. Theoretical investigation of thermal performance of flat dual-function solar［J］. Journal of Anhui Institute of Architecture & Industry, 2013, 21(5): 100-103.
［2］程友良, 杨国宁, 王月坤. 太阳能空气集热器吸热板结构优化及其数值模拟［J］.可再生能源, 2016, 34(7): 949-954.
CHENG Youliang, YANG Guoning, WANG Yuekun. The absorber plate structure optimization for the solar air collector and its numerical simulation［J］. Renewable Energy Resources, 2016, 34(7): 949-954.
［3］BAKARI R. Heat transfer optimization in air flat plate solar collectors integrated with baffles［J］. Journal of Power and Energy Engineering, 2018, 6(1): 70-84.
［4］钱珊珠, 赵宇航. 扰流板数量对集热器热效率的模拟研究［J］. 中国农机化学报, 2016, 37(9): 178-181.
QIAN Shanzhu, ZHAO Yuhang. Simulation study on the collector efficiency indifferent number of spoilers ［J］. Journal of Chinese Agricultural Mechanization, 2016, 37(9): 178-181.
［5］夏佰林, 赵东亮, 代彦军, 等.扰流板型太阳能平板空气集热器集热性能［J］. 上海交通大学学报, 2011, 45(6): 870-874.
XIA Bailin, ZHAO Dongliang, DAI Yanjun, et al. Study on a flat plate solar air collector with baffles［J］. Journal of Shanghai Jiao Tong University, 2011, 45(6): 870-874.
［6］刘一福, 黄坤荣, 王玉林. 扰流板型太阳能平板空气集热器数值模拟分析［J］. 机械研究与应用, 2012, 25(1): 65-68.
LIU Yifu, HUANG Kunrong, WANG Yulin. Numerical simulation analysis on a flat plate solar air collector with baffles［J］. Mechanical Research and Application, 2012, 25(1): 65-68.
［7］ROMDHANE B S. The air solar collectors: Compa-rative study, introduction of baffles to favor the heat transfer［J］. Energy, 2007, 81(1): 139-149.
［8］KUMAR R, CHAUHAN R, MUNEESH S, et al. Experimental investigation of effect of flow attack angle on thermohydraulic performance of air flow in a rectangular channel with discrete V-pattern baffle on the heated plate ［J］. Advances in Mechanical Engineering, 2016, 8(5): 1-12.
［9］李晓琳, 庄卫东. 蛇形双流道平板式太阳能空气集热器的设计与试验［J］. 黑龙江八一农垦大学学报, 2017, 29(4): 94-98.
LI Xiaolin, ZHUANG Weidong. Design and experiment of flat plate solar air collector with double serpentine flow passages ［J］. Journal of Heilongjiang Bayi Agricultural University, 2017, 29(4): 94-98.
［10］贾胜辉. 平板太阳能空气集热器的数值模拟研究［J］. 建筑科学, 2015, 31(2): 85-91.
JIA Shenghui. Numerical investigation of flat plate solar air collectors［J］. Building Science, 2015, 31(2): 85-91.
［11］丁刚, 左然, 张旭鹏, 等. 平板式太阳能空气集热器流道改进的试验研究和数值模拟［J］. 可再生能源, 2011, 29(2): 12-15.
DING Gang, ZUO Ran, ZHANG Xupeng, et al. Experimental investigation and numerical simulation on improvement of flat-plate solar air collector flow channels［J］. Renewable Energy Resources, 2011, 29(2): 12-15.
［12］王林军, 高章维, 张东, 等. 平板型双流道太阳能空气集热器热性能研究［J］. 太阳能学报, 2016, 37(10): 2562-2568.
WANG Linjun, GAO Zhangwei, ZHANG Dong, et al. Thermal performance analysis of a flat plate solar air collector with double channels ［J］. Acta Energiae Solaris Sinica, 2016, 37(10): 2562-2568.
