针对模块机器人在运动过程中遇到的运动干涉问题,提出了一种应用于MLattice模块机器人的构型优化设计.通过引入平动关节,实现模块机器人机械臂的收缩和伸展运动,从而避免运动干涉.通过运动学分析,在避免运动干涉的前提下尽可能减少平动关节的行程,从而顺利完成自重构过程并确保模块机器人自身的结构强度及稳定性.通过对不同运动情况下的运动空间的仿真和原型机实验,验证了优化构型的可行性和运动能力.结果表明,引入的平动关节能够很好地避免模块间的运动干涉且各机械关节的设计切实可行,为后续大规模模块机器人系统的研究建立了基础.
To solve the movement interference happening during the motions of modular robots, an optimized structure design is proposed and applied to the MLattice modular robots. By introducing a translational joint, the mechanical arms of modular robots are able to shrink and stretch to avoid the movement interference. Through the kinematic analysis, the movement interference can be avoided and also the stroke of translational joint can be minimized, then the modular robots can successfully realize the selfreconfiguration process and ensure the structural strength as well as the stability of the robots. The feasibility and motor ability of optimized structure are verified through the simulations of motion spaces under different situations and the experiment of prototype robots. The results show that the introduced translational joint can well avoid the movement interference happening among the adjacent modules, that the design of each mechanical joint is operable, and that it establishes the foundation for the further researches about large scale modular robotics system.
1]高文斌, 王洪光, 姜勇,等. 模块化可重构机器人标定方法研究[J]. 机械工程学报, 2013, 49(17): 92100.
GAO Wenbin, WANG Hongguang, JIANG Yong, et al. Research on the calibration of modular reconfigurable robot[J]. Journal of Mechanical Engineering, 2013, 49(17): 92100.
[2]费燕琼, 王永, 宋立博,等. 网格型自重构模块化机器人的对接过程[J]. 机械工程学报, 2011, 47(7): 3137.
FEI Yanqiong, WANG Yong, SONG Libo, et al. Docking process of lattice selfreconfigurable modular robots[J]. Journal of Mechanical Engineering, 2011, 47(7): 3137.
[3]NEUBERT J, LIPSON H. Soldercubes: A selfsoldering selfreconfiguring modular robot system[J]. Autonomous Robots, 2015, 40(1): 120.
[4]YIM M, SHEN W M, SALEMI B, et al. Modular selfreconfigurable robot systems—Challenges and opportunities for the future[J]. IEEE Robotics & Automation Magazine, 2007, 14(1): 4352.
[5]WU Chao, WANG Xuyang, ZHUANG Guangjiao, et al. Motion of an underwater selfreconfigurable robot with treelike configurations[J]. Journal of Shanghai Jiao Tong University (Science), 2013, 18(5): 598605.
[6]HOSSAIN S G M, NELSON C A, DASGUPTA P. Hardware design and testing of ModRED: A modular selfreconfigurable robot system[C]∥Advances in Reconfigurable Mechanisms and Robots. London: Springer, 2012: 515523.
[7]MENG Y, ZHANG Y, SAMPATH A, et al. Crossball: A new morphogenetic selfreconfigurable modular robot[J].IEEE International Conference on Robotics and Automation, 2011, 43(9): 267272.
[8]GARCIA R F M, HILLER J, STOY K, et al. A vacuumbased bonding mechanism for modular robotics[J]. IEEE Transactions on Robotics, 2011, 27(5): 876890.
[9]HONG W, WANG S, SHUI D. Reconfigurable robot system based on electromagnetic design[C]∥International Conference on Fluid Power and Mechatronics. China: IEEE, 2011: 570575.
[10]KEVIN C W, MATTHEW S M, MICHAEL D M K, et al. M3Express: A lowcost independentlymobile reconfigurable modular robot[C]∥International Conference on Robotics and Automation. USA: IEEE, 2012: 27042710.
[11]GRAHAM G R, HARRY H C. Design of iMobot, an intelligent reconfigurable mobile robot with novel locomotion[C]∥International Conference on Robotics and Automation. USA: IEEE, 2010: 6065.
[12]LYDER A, FRANCO R, GARCIA M, et al. Genderless connection mechanism for modular robots introducing torque transmission between modules[C]∥International Conference on Robotics and Automation. USA: IEEE, 2010: 7781.
[13]GUAN E, YAN W, JIANG D, et al. A novel design for the selfreconfigurable robot module and connection mechanism[C]∥International Conference on Intelligent Robotics and Applications. Berlin: Springer, 2010: 400408.
[14]GUAN Enguang, FU Zhuang, FEI Jian, et al. MLattice: A selfconfigurable modular robotic system for composing space solar panels[J]. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 2015, 229(5): 39.
[15]JOHN J C. Introduction to robotics: Mechanics and control[M]. Upper Saddle River: Pearson Prentice Hall, 2005: 6276.