上海交通大学学报 ›› 2021, Vol. 55 ›› Issue (9): 1142-1150.doi: 10.16183/j.cnki.jsjtu.2020.103

所属专题: 《上海交通大学学报》2021年“无线电电子学与电信技术”专题 《上海交通大学学报》2021年12期专题汇总专辑

• • 上一篇    下一篇

基于位移放大机构的压电快速反射镜设计

谢永1, 刘重飞1, 贾建军1,2(), 戴箭胜1   

  1. 1.中国科学院 上海技术物理研究所, 上海 200083
    2.中国科学院大学, 北京 100049
  • 收稿日期:2020-04-13 出版日期:2021-09-28 发布日期:2021-10-08
  • 通讯作者: 贾建军 E-mail:jjjun10@mail.sitp.ac.cn
  • 作者简介:谢 永(1987-),男,河北省承德市人,助理研究员,主要从事压电陶瓷精密驱动机构方面研究

Design of Fast Steering Mirror Based on Displacement Amplification Mechanism

XIE Yong1, LIU Chongfei1, JIA Jianjun1,2(), DAI Jiansheng1   

  1. 1. Shanghai Institute of Technical Physics, Chinese Academy of Sciences, Shanghai 200083, China
    2. University of Chinese Academy of Sciences, Beijing 100049, China
  • Received:2020-04-13 Online:2021-09-28 Published:2021-10-08
  • Contact: JIA Jianjun E-mail:jjjun10@mail.sitp.ac.cn

摘要:

针对压电陶瓷直驱式快反镜偏转角度受到压电陶瓷伸长量较小的限制,无法实现大转角的现状,设计了一款新型压电快反镜,采用二级杠杆式放大机构实现压电陶瓷微小位移的放大,并在放大机构上粘贴电阻应变片作为反馈传感器.实验结果表明,所设计的快反镜可实现大于50 mrad的机械偏转范围,同时闭环线性度优于0.5%,能够满足大范围、高精度光束指向的需求.

关键词: 放大机构, 压电陶瓷, 快速反射镜

Abstract:

According to the current situation that the deflection angle of the piezoelectric ceramics direct drive fast steering mirror (FSM) is restricted by small elongation of piezoelectric ceramics and the large deflection angle cannot be realized, a novel piezoelectric FSM is designed. A two-stage lever-type amplification mechanism is adopted to realize the amplification of small displacement of piezoelectric ceramics and a strain gauge attached to the amplification mechanism is considered as the displacement sensor. The experimental results indicate that the deflection angle of the designed FSM is larger than 50 mrad, and the closed-loop linearity is below 0.5%, which satisfies the requirements of large deflection angle and accuracy pointing for light beam.

Key words: amplification mechanism, piezoelectric ceramics, fast steering mirror (FSM)

中图分类号: