上海交通大学学报

上海交通大学学报 ›› 2019, Vol. 53 ›› Issue (Sup.1): 104-108.doi: 10.16183/j.cnki.jsjtu.2019.S1.019

• 学报（中文） • 上一篇    下一篇

国际核电仪控标准规范的更新及其适用性

黄伟杰，张宓，崔聪，李亮   

  1. 中华人民共和国生态环境部 核与辐射安全中心， 北京 100082
  • 发布日期:2020-04-08
  • 通讯作者: 李亮，男，高级工程师，电话 (Tel.): 010-82203491；E-mail: liliangfj@126.com.
  • 作者简介:黄伟杰(1979-)， 男，河南省洛阳市人，高级工程师，主要从事核电仪控系统的审评与技术研究.

Applicability of Updated International I&C Standards and Norms for Nuclear Power Plant

HUANG Weijie,ZHANG Mi,CUI Cong,LI Liang   

  1. Nuclear and Radiation Safety Center, Ministry of Ecology and Environment of the People’s Republic of China, Beijing 100082, China
  • Published:2020-04-08

PDF (PC)

613

摘要： 国际原子能机构(IAEA)安全导则、国际电工委员会(IEC)和电气和电子工程师协会(IEEE)标准均为开展核电数字化仪表和控制(I&C)系统设计和审评活动的国际通用规范和主要依据，近年来进行了修订和更新，对I&C领域的新问题提出了相应的技术要求.为了更新我国的仪控标准，解决I&C审评实践中的问题，需要对更新后的国际标准规范的适用性进行研究.通过系统分析方法，介绍了IAEA安全导则、IEC和IEEE标准的更新情况及其对于人因工程、信息安全、商品级物项评价等方面的技术要求，并评估了更新后的国际标准对我国核电I&C系统设计和审评活动的适用性，对后续开展相关设计、审评工作以及标准规范更新具有一定指导意义.

关键词: 数字化仪表和控制(I&C)； 标准规范； 技术见解

Abstract: International atomic energy agency (IAEA) safety guideline, international electrotechnical commission (IEC) standard and institute of electrical and electronics engineers (IEEE) standard are the common international norms and technical basis of the design and review for digital instrumentation and control (I&C) system used in nuclear power plant, and some of those have been updated in recent years with technical requirements for the new issues for I&C. To update China’s standards for digital I&C and solve the problems in review, the applicability of updated international standards should be studied. Through systematic analysis, the update of these three norms above were introduced, and their technical requirements of human factors engineering, cyber security, commercial grade dedication were also introduced. In addition, the applicability of updated international standards and norms for the design and review for I&C system in China’s nuclear power plant was evaluated. The study has certain significance for the follow-up nuclear safety design and review as well as updating of relevant standards and norms.

Key words: digital instrumentation and control (I&C); standards and norms; technical opinion

中图分类号: