仿雨滴织构拉刀减磨润滑机制

doi:10.16183/j.cnki.jsjtu.2018.03.013

摘要/Abstract

摘要： 采用激光加工技术在键槽拉刀后刀面加工了仿雨滴形状的表面微织构，进行了45#钢负载拉削试验研究，同时，基于N-S方程与润滑理论，建立雨滴织构拉刀减磨润滑数学分析模型，求解拉刀润滑油液的流动特性，剖析微织构拉刀的减磨润滑机制. 研究表明，微织构拉刀能够有效降低拉削负载，提高刀具响应性能，减缓刀具磨损，改善拉削性能；拉削过程中，雨滴形状微织构可以有效减小润滑液流动阻力，加快润滑液流动速度，使得润滑液在单位时间内可以带走更多的热量，降低拉削温度，提高拉削效率与加工精度；同时微织构槽可存储微量拉削液，在微润滑状态下可补充局部拉削液断层的不足.

关键词: 表面织构, 雨滴, 仿生, 拉削力, 减磨

Abstract: Laser processing technology was used to generate raindrop surface texture on the flank of keyway broach. Broaching load test of 45# steel was carried out. A fluid dynamics model was established to analyze the lubrication oil flow characteristics and the lubricating mechanism of micro-textured broach by the fluid dynamics analysis method. Research shows that micro-textured broach can not only reduce the broach-ing load and tool wear, but also improve the response and broaching performance. Meanwhile, flow resistance of the lubricating fluid was effectively reduced by raindrop micro-texture, which leads to an increase in flow velocity of the lubricating fluid, and the lubricant could took away more heat in unit time, so that broaching temperature was effectively reduced. The textured broach can greatly improve cutting efficiency and machining accuracy. The micro-textured groove can also be used to store micro lubricating fluid, to be a supplement under the state of micro-lubrication.

Key words: surface texture, raindrop, bionics, broaching force, anti-friction

中图分类号:

TH 162

倪敬，李斌，许静. 仿雨滴织构拉刀减磨润滑机制[J]. 上海交通大学学报（自然版）, 2018, 52(3): 340-347.

NI Jing,LI Bin,XU Jing. Antifriction and Lubrication Mechanism of Imitate Raindrop Textured Broach[J]. Journal of Shanghai Jiaotong University, 2018, 52(3): 340-347.

参考文献

［1］STONEY R, PULLEN T, ALDWELL B, et al. Observations of surface acoustic wave strain and resistive strain measurements on broaching tools for process monitoring［J］. Procedia CIRP, 2014, 14: 66-71. ［2］MEIER H, NINOMIYA K, DORNFELD D, et al. Hard broaching of base hardened SAE 5120［J］. Procedia CIRP, 2014, 14: 60-65. ［3］LIU Z Q, WANG C D, CHEN M, et al. A coupling response surfaces methodology of multiple constraints (CRSMMC) for parameters optimization of broach tool in broaching of heat-resistant steel X12CrMoWVNb N-10-1-1［J］. The International Journal of Advanced Manufacturing Technology, 2014, 74(9/12): 1719-1732. ［4］MIRITOIU C. Strength analysis methods of circular pull broach cogs［J］. Revista Fiabilitate si Durabilitate, 2010, 2(6): 73-78. ［5］MAKAROV V F, TUKAMYSHEV V R. Numerical modelling of high speed broaching multitoothes broaches［J］. International Journal of Material Forming, 2010, 3(1): 523-526. ［6］MEDEIROS R S, SCHARCANSKI J, WONG A. Image segmentation via multi-scale stochastic regional texture appearance models［J］. Computer Vision and Image Understanding, 2016, 142(C): 23-36. ［7］DE MELLO J D B, JR GONALVES J L, COSTA H L. Influence of surface texturing and hard chromium coating on the wear of steels used in cold rolling mill rolls［J］. Wear, 2013, 302(1/2): 1295-1309. ［8］BRAUN D, GREINER C, SCHNEIDER J, et al. Efficiency of laser surface texturing in the reduction of friction under mixed lubrication［J］. Tribology International, 2014, 77(6): 142-147. ［9］LI L H, AN Q B. An in-depth study of tool wear monitoring technique based on image segmentation and texture analysis［J］. Measurement, 2016, 79: 44-52. ［10］BRADLEY C, WONG Y S. Surface texture indicators of tool wear——A machine vision approach［J］. International Journal of Advanced Manufacturing Technology, 2001, 17(6): 435-443. ［11］DOUGHERTY P S M, SRIVASTAVA G, ONLER R, et al. Lubrication enhancement for UHMWPE sliding contacts through surface texturing［J］. Tribology Transactions, 2015, 58(1): 79-86. ［12］DENG J X, WU Z, LIAN Y S, et al. Performance of carbide tools with textured rake-face filled with solid lubricants in dry cutting processes［J］. International Journal of Refractory Metals and Hard Materials, 2011, 30(1): 164-172. ［13］林舒, 江来珠, 张柯, 等. Ti和Nb对18Cr-2Mo铁素体不锈钢韧脆转变温度的影响［J］. 上海交通大学学报, 2010, 44(5): 598-603. LIN Shu, JIANG Laizhu, ZHANG Ke, et al. Influence of Ti and Nb microalloying on the ductile to brittle transition temperature of 18Cr-2Mo ferritic stainless steel［J］. Journal of Shanghai Jiao Tong University, 2010, 44(5): 598-603. ［14］牟介刚, 代东顺, 谷云庆, 等. 非光滑表面离心泵叶轮的流动减阻特性［J］. 上海交通大学学报, 2016, 50(2): 306-312. MOU Jiegang, DAI Dongshun, GU Yunqing, et al. Characteristics of non-smooth surface drag reduction influence on centrifugal pump impeller［J］. Journal of Shanghai Jiao Tong University, 2016, 50(2): 306-312. ［15］VLADESCU S C, OLVER A V, PEGG I G, et al. The effect of surface texture in reciprocating contacts——An experimental study［J］. Tribology International, 2015, 82: 28-42. ［16］LENARD P. Ueber regen［J］. Meteorologische Zeitschrift, 1904, 21(2): 248-262. ［17］SAVIC P. Circulation and distortion of liquid drops falling through a viscous medium［M］. Ottawa: National Research Council of Canada, 1953. ［18］刘西川, 高太长, 刘磊, 等. 雨滴微物理特征研究及测量技术进展［J］. 地球科学进展, 2013, 28(11): 1217-1226. LIU Xichan, GAO Taichang, LIU Lei, et al. Advances in microphysical features and measurement techniques of raindrops［J］. Advances in Earth Science, 2013, 28(11): 1217-1226. ［19］刘磊, 李浩, 高太长. 雨滴的近似椭球模型及其近红外散射特性研究［J］. 气象科学, 2008, 28(3): 271-275. LIU Lei, LI Hao, GAO Taichang. The approximate ellipsoid model for raindrop and its near-infrared scattering characteristics［J］. Scientia Meteorologica Sinica, 2008, 28(3): 271-275. ［20］SPILHAUS A F. Raindrop size, shape, and falling speed［J］. Journal of Meteorology, 1948, 5(1): 108-110. ［21］陈火红. Marc有限元实例分析教程［M］. 北京: 机械工业出版社, 2002. ［22］王霄, 孟小霞, 刘东雷, 等. 基于N-S方程的微造型表面动压润滑性能的分析研究［J］. 润滑与密封, 2007, 32(3): 38-42. WANG Xiao, MENG Xiaoxia, LIU Donglei, et al. Research on hydrodynamic lubrication of textured surfaces based on Navier-Stokes equation［J］. Lubrication Engineering, 2007, 32(3): 38-42.

[1]	丁显廷. 单细胞生命体的系统工作原理是什么？[J]. 上海交通大学学报, 2021, 55(Sup.1): 14-15.
[2]	王斌，章雪晴. 脑靶向递送策略的挑战和机遇[J]. 上海交通大学学报, 2021, 55(Sup.1): 62-64.
[3]	李凌云. 可以仿造细胞膜上的主动运输进行海水淡化吗？[J]. 上海交通大学学报, 2021, 55(Sup.1): 102-103.
[4]	郑昌隆, 丁晓红, 沈洪, 赵利娟. 基于自适应成长法的舵面结构动力学拓扑优化设计方法研究[J]. 空天防御, 2021, 4(2): 7-.
[5]	张雅琼, 于丰宁, 塔娜, 饶柱石. 仿生时延放大系统的设计及特性分析[J]. 上海交通大学学报, 2020, 54(6): 562-568.
[6]	刘郡，张执南，谢友柏. 低黏度润滑油与织构对活塞环-缸套摩擦特性的影响[J]. 上海交通大学学报（自然版）, 2018, 52(5): 505-510.
[7]	周阳，吴德伟. 基于位置细胞的空间表征及位置估计模型[J]. 上海交通大学学报（自然版）, 2018, 52(4): 488-494.
[8]	王江北，方晔阳，童歆，张帅，费燕琼. 多气囊仿生软体机器人设计及其运动特性分析[J]. 上海交通大学学报（自然版）, 2018, 52(1): 20-25.
[9]	雷静桃，俞煌颖. 四足机器人气动人工肌肉驱动的仿生柔性机体动力学分析[J]. 上海交通大学学报（自然版）, 2014, 48(12): 1688-1693.
[10]	杨刚1, 2,乔俊飞1. 跨越-侧抑制神经网络分析及其应用[J]. 上海交通大学学报（自然版）, 2014, 48(07): 965-970.