基于混合模糊多属性决策的复杂产品模块划分方案评价

doi:10.16183/j.cnki.jsjtu.2017.11.014

摘要/Abstract

摘要： 针对复杂产品的模块划分难以获得唯一方案问题，提出了一种基于混合模糊多属性决策理论的复杂产品模块划分方案评价方法.根据指标特性，分别运用区间数、三角模糊数、直觉模糊数和区间直觉模糊数对指标进行合理赋值；采用模糊层次分析法确定指标权重；基于逼近理想解(TOPSIS)排序框架计算备选方案到正、负理想解距离，根据综合相对贴进度进行方案排序.并以某品牌汽车发动机的模块划分方案为例，验证方法的有效性.

关键词: 复杂产品；模块划分；方案评价；混合模糊；多属性决策

Abstract: Modular development can effectively deal with the complex coupling problems of function and structure in complex products. The basis of modularization makes it difficult to obtain the single module partition scheme for complex products. To solve this problem, a module partition scheme evaluation method for complex products is put forward based on the multi-attributes decision making approach under hybrid fuzzy environment. According to the properties of the indices, by means of the interval number, intuitionistic fuzzy number, triangular fuzzy number and interval intuitionistic fuzzy number, the indices are given reasonable value assignment, respectively. The weights of the indices are determined by fuzzy analytic hierarchy process(FAHP). Distance between alternatives to the positive or negative ideal solution is calculated on the basis of the framework of technique for order preference by similarity to ideal solution (TOPSIS), and the ranking order is obtained according to the comprehensive relative closeness degree. Finally, a case study of automobile engine module partition scheme evaluation is implemented to varify the effectiveness and efficiency of the proposed approach.

Key words: complex products;module partition;scheme evaluation; hybrid fuzzy; multi-attribute decision making

中图分类号:

TP 391.7

李玉鹏1，连晓振1，卢成1，褚学宁2. 基于混合模糊多属性决策的复杂产品模块划分方案评价[J]. 上海交通大学学报, 2017, 51(11): 1374-1382.

LI Yupeng1,LIAN Xiaozhen1,LU Cheng1,CHU Xuening2. Evaluation Approach to Rank Module Partition Schemes of Complex Products Based on Hybrid Fuzzy Multi-Attribute Decision Making[J]. Journal of Shanghai Jiao Tong University, 2017, 51(11): 1374-1382.

参考文献

［1］SMITH S, YEN C C. Green product design through product modularization using atomic theory［J］. Robotics and Computer-Integrated Manufacturing, 2010, 26 (6): 790-798. ［2］YU D, WU Y, LU T. Interval-valued intuitionistic fuzzy prioritized operators and their application in group decision making［J］. Knowledge-Based Systems, 2012, 30(6): 57-66. ［3］LI Y, CHU X, CHU D, et al. An integrated module partition approach for complex products and systems based on weighted complex networks［J］. International Journal of Production Research, 2014, 52(15): 4608-4622. ［4］侯亮, 唐任仲, 徐燕申. 产品模块化设计理论, 技术与应用研究进展［J］. 机械工程学报, 2004, 40(1): 56-61. HOU Liang, TANG Renzhong, XU Yanshen. Review of theory key technologies and its application of modular product design［J］. Chinese Journal of Mechanical Engineering, 2004, 40(1): 56-61. ［5］JI Y, JIAO R J, CHEN L, et al. Green modular design for material efficiency: A leader-follower joint optimization model［J］. Journal of Cleaner Production, 2013, 41(2): 187-201. ［6］SCHILLING M A, STEENSMA H K. The use of modular organizational forms: An industry-level analysis［J］. Academy of Management Journal, 2001, 44(6): 1149-1168. ［7］王康, 张树生, 何卫平, 等. 基于SPEA2的复杂机械产品选择装配方法［J］. 上海交通大学学报, 2016, 50(7): 1048-1053. WANG Kang, ZHANG Shusheng, HE Weiping, et al. Selective assembly of complicated mechanical product based on SPEA2［J］. Journal of Shanghai Jiao Tong University, 2016, 50(7): 1048-1053. ［8］徐泽水, 陈剑. 一种基于区间直觉判断矩阵的群决策方法［J］. 系统工程理论与实践, 2007, 27(4): 126-133. XU Zeshui, CHEN Jian. A group decision making method based on interval valued intuitionistic judgment matrix［J］. System Engineering Theory and Practice, 2007, 27(4): 126-133. ［9］左冠丽, 褚学宁, 陈东萍, 等. 基于直觉模糊信息公理的产品服务方案选优［J］. 计算机集成制造系统, 2015, 21(4): 1134-1141. ZUO Guanli, CHU Xuening, CHEN Dongping, et al. Product service system optimal selection based on intuitionistic fuzzy information axiom［J］. Computer Integrated Manufacturing Systems, 2015, 21(4): 1134-1141. ［10］BENTKOWSKA U, BUSTINCE H, JURIO A, et al. Decision making with an interval-valued fuzzy preference relation and admissible orders［J］. Applied Soft Computing, 2015, 35: 792-801. ［11］DONG M, LI S, ZHANG H. Approaches to group decision making with incomplete information based on power geometric operators and triangular fuzzy AHP［J］. Expert Systems with Applications, 2015, 42(21): 7846-7857. ［12］GENG X, CHU X, ZHANG Z. A new integrated design concept evaluation approach based on vague sets［J］. Expert Systems with Applications, 2010, 37(9): 6629-6638. ［13］王文全, 黄胜, 王超, 等. 舰船通道布置方案的直觉模糊多属性群决策方法［J］. 上海交通大学学报, 2013, 47(6): 894-899. WANG Wenquan, HUANG Sheng, WANG Chao, et al. Intuitionistic fuzzy multiple attribute group decision-making for ship passage arrangement［J］. Journal of Shanghai Jiao Tong University, 2013, 47(6): 894-899. ［14］YAGER R R. A note on measuring fuzziness for intuitionistic and interval-valued fuzzy sets［J］. International Journal of General Systems, 2015, 44 (7/8): 889-901. ［15］LI Y P, CHU X N, CHU D X, et al. An integrated approach to evaluate module division schemes of complex products and systems based on interval-valued intuitionistic fuzzy sets［J］. International Journal of Computer Integrated Manufacturing, 2014, 27 (7): 675-689. ［16］CHEN J F, HSIEH H N, DO Q H. Evaluating teaching performance based on fuzzy AHP and comprehensive evaluation approach［J］. Applied Soft Computing, 2015, 28: 100-108. ［17］CHITHAMBARANATHAN P, SUBRAMANIAN N, GUNASEKARAN A, et al. Service supply chain environmental performance evaluation using grey based hybrid MCDM approach［J］. International Journal of Production Economics, 2015, 166: 163-176. ［18］KHALILI-DAMGHANI K, TAVANA M, SANTOS-ARTEAGA F J. A comprehensive fuzzy DEA model for emerging market assessment and selection decisions［J］. Applied Soft Computing, 2016, 38(C): 676-702. ［19］CHANG T H. Fuzzy VIKOR method: A case study of the hospital service evaluation in Taiwan［J］. Information Sciences, 2014, 271(7): 196-212. ［20］PEI Z. A note on the TOPSIS method in MADM problems with linguistic evaluations［J］. Applied Soft Computing, 2015, 36(C): 24-35. ［21］黄胜, 郭海鹏, 侯远杭, 等. 基于改进TOPSIS法的舰船总体方案群决策方法［J］. 上海交通大学学报, 2014, 48(1): 92-97. HUANG Sheng, GUO Haipeng, HOU Yuanhang, et al. Group decision-making method for warship based on improved TOPSIS［J］. Journal of Shanghai Jiao Tong University, 2014, 48(1): 92-97. ［22］XU Z. Multiple-attribute group decision making with different formats of preference information on attributes［J］. IEEE Transactions on Systems, Man, and Cybernetics. Part B: Cybernetics, 2007, 37 (6): 1500-1511. ［23］YU X, XU Z. Prioritized intuitionistic fuzzy aggregation operators［J］. Information Fusion, 2013, 14 (1): 108-116. ［24］王建, 庞永杰, 杨卓懿, 等. 改进模糊层次分析法在AUV总体性能评价中的应用［J］. 上海交通大学学报, 2015, 49(2): 275-280. WANG Jian, PANG Yongjie, YANG Zhuoyi, et al. Application of improved FAHP in evaluation of AUV overall performance［J］. Journal of Shanghai Jiao Tong University, 2015, 49(2): 275-280. ［25］ZHANG Z, CHU X. Fuzzy group decision-making for multi-format and multi-granularity linguistic judgments in quality function deployment［J］. Expert Systems with Applications, 2009, 36(5): 9150-9158.

编辑推荐 0

Metrics

阅读次数

全文

HTML			PDF

最新录用	在线预览	正式出版	最新录用	在线预览	正式出版
0	0	0	0	0	84

来源	本网站	其他网站

次数	34	50
比例	40%	60%

摘要

1069

最新录用	在线预览	正式出版

0	0	1069

来源	本网站	其他网站

次数	482	587
比例	45%	55%

[1]	周鹏辉, 马红占, 陈东萍, 陈梦月, 褚学宁. 基于模糊随机故障模式与影响分析的#br# 产品再设计模块识别[J]. 上海交通大学学报, 2017, 51(10): 1189-1195.
[2]	刘园1，张在房1，姚迪2，褚学宁3. 基于多目标离散粒子群的产品服务系统方案配置规则提取[J]. 上海交通大学学报（自然版）, 2015, 49(08): 1123-1130.
[3]	刘虓1,操安喜2,叶家玮1. 一种新型不规则三维排样构造算法[J]. 上海交通大学学报（自然版）, 2013, 47(07): 1060-1064.
[4]	李夏霜, 何卫平, 雷蕾, 王伟, 林清松. 刀具柱面Data Matrix码几何畸变的仿真分析[J]. 上海交通大学学报（自然版）, 2012, 46(09): 1349-1354.
[5]	何援军. 对几何计算的一些思考[J]. 上海交通大学学报（自然版）, 2012, 46(02): 167-171.
[6]	邓卫燕，陆国栋，耿玉磊，王进. 基于神经网络的三维人体建模方法[J]. 上海交通大学学报（自然版）, 2008, 42(10): 1631-1634.
[7]	俞翔，牛强，柳伟，周雄辉. 自由变形技术在有限元网格重用中的应用[J]. 上海交通大学学报（自然版）, 2015, 49(05): 714-717.
[8]	刘植1，吕雁燕1，刘晓雁2，张莉1. 区间q-Bézier曲线的降阶算法[J]. 上海交通大学学报, 2018, 52(1): 111-119.
[9]	刘虓1,叶家玮1，刘嘉敏2. 基于混合表达图形的二维不规则排样构造算法[J]. 上海交通大学学报, 2018, 52(7): 825-830.