基于新流动沸腾传热关联式的微通道平行流蒸发器数值模型

doi:10.16183/j.cnki.jsjtu.2017.09.004

摘要/Abstract

摘要： 提出了一种基于新流动沸腾传热关联式的微通道平行流蒸发器数值模型，并与文献中的实验数据进行对比，以验证微通道平行流蒸发器数值模型的正确性.其中，在制冷剂流量为34.6~245.6kg/h，蒸发压力为200~500kPa的条件下，分析了4种流动沸腾传热关联式对所提出的数值模型的影响.结果表明，在所采用的99%的实验数据下，新流动沸腾传热关联式的预测误差在±30%范围内.与此同时，采用所提出的微通道平行流蒸发器数值模型预测微通道平行流蒸发器的制冷量、制冷剂过热度、空气侧和制冷剂侧压降所产生的平均绝对误差分别为1.5%、18.8%、14.2%和19.8%.

关键词: 微通道平行流蒸发器； , 数值模型； , 新关联式； , 流动沸腾传热

Abstract: In this paper, a numerical model with the recently proposed flow boiling heat transfer correlation was established for microchannel parallel flow evaporator. The numerical model was verified by comparing the experimental data with the open literature, where the refrigerant mass flow rate range was 34.6—245.6kg/h and evaporation pressure was 200—500kPa. The effects of four different flow boiling heat transfer correlations on the numerical model performance were investigated. Results showed that the correlation predicted 99% of experimental data in a ±30% error band. Moreover, the numerical model with the correlation yielded the mean absolute errors of 1.5%, 18.8%, 14.2% and 19.8% in prediction of cooling capacity, refrigerant superheat, air side and refrigerant side pressure drop, respectively. The presented numerical model can be used to evaluate and optimize the performance of microchannel parallel flow evaporator.

Key words: microchannel parallel flow evaporator, numerical model, new correlation, flow boiling heat transfer

中图分类号:

TB 61

马磊，谷波，田镇，李萍. 基于新流动沸腾传热关联式的微通道平行流蒸发器数值模型[J]. 上海交通大学学报（自然版）, 2017, 51(9): 1043-1049.

MA Lei,GU Bo,TIAN Zhen,LI Ping. Numerical Model of a Microchannel Parallel Flow Evaporator with
New Flow Boiling Heat Transfer Correlation[J]. Journal of Shanghai Jiaotong University, 2017, 51(9): 1043-1049.

参考文献

［1］QI Z, CHEN J, RADERMACHER R. Investigating performance of new minichannel evaporators［J］. Applied Thermal Engineering, 2009, 29(17/18): 35613567.
［2］JOKAR A, HOSNI M H, ECKELS S J. Dimensional analysis on the evaporation and condensation of refrigerant R134a in minichannel plate heat exchangers［J］. Applied Thermal Engineering, 2006, 26(17/18): 22872300.
［3］ONG C L, THOME J R. Macrotomicrochannel transition in twophase flow. Part 2. Flow boiling heat transfer and critical heat flux［J］. Experimental Thermal and Fluid Science, 2011, 35(6): 873886.
［4］梁媛媛, 赵宇, 陈江平. 微通道平行流蒸发器仿真模型［J］. 上海交通大学学报, 2013, 47(3): 413417.
LIANG Yuanyuan, ZHAO Yu, CHEN Jiangping. Numerical model for microchannel parallel flow evaporator［J］. Journal of Shanghai Jiao Tong University, 2013, 47(3): 413417.
［5］TSO C P, CHENG Y C, LAI A C K. Dynamic behavior of a direct expansion evaporator under frosting condition. Part I. Distributed model［J］. International Journal of Refrigeration, 2006, 29(4): 611623.
［6］张萍, 谷波, 王婷. 多元微通道平行流冷凝器理论模型与实验研究［J］. 上海交通大学学报, 2013, 47(11): 17381744.
ZHANG Ping, GU Bo, WANG Ting. Theoretical model and experimental research on multiple microchannel parallel flow condenser［J］. Journal of Shanghai Jiao Tong University, 2013, 47(11): 17381744.
［7］方继华, 谷波, 田镇. 制冷剂侧结构对多元微通道平行流冷凝器传热与流动性能的影响［J］. 上海交通大学学报, 2014, 48(9): 13151322.
FANG Jihua, GU Bo, TIAN Zhen. Effects of refrigerantside structure on heat transfer and flow performance of multiple microchannel parallel flow condenser［J］. Journal of Shanghai Jiao Tong University, 2014, 48(9): 13151322.
［8］KANDLIKAR S G, BALASUBRAMANIAN P. An extension of the flow boiling correlation to transition, laminar, and deep laminar flows in minichannels and microchannels［J］. Heat Transfer Engineering, 2004, 25(3): 8693.
［9］BERTSCH S S, GROLL E A, GARIMELLA S V. A composite heat transfer correlation for saturated flow boiling in small channels［J］. International Journal of Heat and Mass Transfer, 2009, 52(7/8): 21102118.
［10］SUN L, MISHIMA K. An evaluation of prediction methods for saturated flow boiling heat transfer in minichannels［J］. International Journal of Heat and Mass Transfer, 2009, 52(23/24): 53235329.
［11］CHEN J C. Correlation for boiling heat transfer to saturated fluids in convective flow［J］. Industrial & Engineering Chemistry Process Design & Development, 1962, 5(3): 322329.
［12］ZHANG M, WEBB R L. Correlation of twophase friction for refrigerants in smalldiameter tubes［J］. Experimental Thermal Fluid Science, 2001, 25(3/4): 131139.

[1]	杨振，付庄，管恩广，徐建南，田仕禾，郑辉. MLattice模块机器人的运动学分析及构型优化[J]. 上海交通大学学报（自然版）, 2017, 51(10): 1153-1159.
[2]	赵君1,余海东2. 基于绝对节点坐标法的柔性双臂机构动力学分析[J]. 上海交通大学学报（自然版）, 2017, 51(10): 1160-1165.
[3]	赵子任1,杜世昌1,黄德林1，任斐2，梁鑫光2. 多工序制造系统暂态阶段产品质量马尔科夫建模与瓶颈分析[J]. 上海交通大学学报（自然版）, 2017, 51(10): 1166-1173.
[4]	黄炫圭. 小边概率条件下较小植入团的算法[J]. 上海交通大学学报（自然版）, 2017, 51(10): 1202-1206.
[5]	罗晶晶a,余海东a,赵春璋a,b,王皓a,b. 基于绝对节点坐标法变截面柔性梁运动稳定性研究[J]. 上海交通大学学报（自然版）, 2017, 51(10): 1174-1180.
[6]	汪一波1，黄亦翔1，李炳初1，凌晓1，赵帅1，刘成良1,张大庆2. 一种基于静力学预计算的开关磁阻电机模态仿真方法[J]. 上海交通大学学报（自然版）, 2017, 51(10): 1181-1188.
[7]	周炳海,黎明. 考虑机器人约束加工的制造单元调度方法[J]. 上海交通大学学报（自然版）, 2017, 51(10): 1214-1219.
[8]	陈进平1，张树生1，何卫平1，王明微1，黄晖2. 基于驱动参数建模的可行更改路径搜索和优选方法[J]. 上海交通大学学报（自然版）, 2017, 51(10): 1220-1227.
[9]	周鹏辉，马红占，陈东萍，陈梦月，褚学宁. 基于模糊随机故障模式与影响分析的产品再设计模块识别[J]. 上海交通大学学报（自然版）, 2017, 51(10): 1189-1195.
[10]	彭程,朱剑昀,陈俐. 基于模型参考控制的混合动力汽车模式切换 [J]. 上海交通大学学报（自然版）, 2017, 51(10): 1196-1201.
[11]	柳伟，杨超. 基于反向传播神经网络的注塑模具用零件报价模型[J]. 上海交通大学学报（自然版）, 2017, 51(10): 1207-1213.
[12]	陈苏婷，王卓，王奇. 基于非线性尺度空间的航拍场景分类[J]. 上海交通大学学报（自然版）, 2017, 51(10): 1228-1234.
[13]	陈宁，贺小滨，桂卫华，阳春华. 基于混沌离散序列的图像加密算法研究[J]. 上海交通大学学报（自然版）, 2017, 51(10): 1273-1280.
[14]	刘凯a，张立民b，周立军a. 随机受限玻尔兹曼机组设计[J]. 上海交通大学学报（自然版）, 2017, 51(10): 1235-1240.
[15]	朱信尧1，宋保维2，徐刚1，杨松林1. 支撑机构驻留水下航行器着陆策略及影响因素[J]. 上海交通大学学报（自然版）, 2017, 51(10): 1241-1251.