三维水翼初始梢涡空泡数的尺度效应

摘要/Abstract

摘要：

摘要：针对梢涡流场和初始梢涡空泡数的尺度效应问题，利用大涡模拟(LES)湍流模型对三维水翼的梢涡流场流速进行模拟计算；为减少误差，对梢涡流域网格进行了局部加密处理，对未发生空化时梢涡内的轴向速度和切向速度进行计算.结果表明，LES湍流模型的流场流速计算结果与实验值吻合较好.同时，介绍了经典初始梢涡空泡数尺度效应公式的推导过程，并利用数值计算的速度环量和涡核半径修正尺度效应公式.

关键词: , 水翼, 梢涡流场, 初始梢涡空泡数, 尺度效应, 计算公式

Abstract:

Abstract： LES model was conducted in the analysis of hydrofoil tip vortex flow field．In order to reduce the discrete error induced by the grid, mesh refinement was applied to the area of the tip vortex core in numerical simulation. The axis velocity and tangential velocity of the tip vortex flow field with no cavitation were calculated and the results are in good agreement with experiments. The scaling law of tip vortex cavitation inception number is introduced and has been modified with the data of vortex core radius and vortex strength.

Key words: hydrofoil, tip vortex flow field, tip vortex cavitation inception number, scaling law, computational formula

中图分类号:

U 661.3

蒲汲君，熊鹰，王睿. 三维水翼初始梢涡空泡数的尺度效应[J]. 上海交通大学学报（自然版）, 2017, 51(3): 374-.

PU Jijun,XIONG Ying,WANG Rui. Scaling Effects of Hydrofoil Tip Vortex Cavitation Inception[J]. Journal of Shanghai Jiaotong University, 2017, 51(3): 374-.

参考文献

［1］AMROMIN E．Tworange scaling for tip vortex cavitation inception［J］. Ocean Engineering, 2006, 33(3): 530534.
［2］SHEN Y T, GOWING S, JESSUP S. Tip vortex cavitation inception scaling for high Reynolds number applications［J］. Journal of Fluids Engineering, 2009, 131(7): 0713016.
［3］DEHGHAN M, BASIRAT T H. Turbulence effects on the granular model of partical motion in a boundary layer flow［J］. The Canadian Journal of Chemical Engineering, 2014, 92(1): 189195.
［4］吴琼, 叶骞, 孟国香. 不同湍流模型在旋转非接触搬运器仿真中的应用和对比［J］. 上海交通大学学报, 2013,47(3):423427.
WU Qiong, YE Qian, MENG Guoxiang. Application and comparison of the different turbulent models simulation for noncontact vortex gripper［J］. Journal of Shanghai Jiao Tong University, 2013, 47(3): 423427.
［5］FRUMAN D H, DUGUE C, CERRUTTI P. Tip vortex rollup and cavitation ［C］∥19th Symposium on Naval hydrodynamics. Washington, USA: National Academy Press, 1992: 633654.
［6］TURNOCK S R, PASHIAS C, ROGERS E. Flow feature identification for capture of propeller tip vortex evolution［C］∥26th Symposium on Naval Hydrodynamics. Rome, Italy: INSEAN Italian Ship Model Basin, 2006: 223240.
［7］ZHANG L X, ZHANG N, PENG X X. A review of studies of mechanism and prediction of tip vortex cavitation inception［J］.Journal of Hydrodynamics, 2015, 27(4): 488495.
［8］MCCORMICK B W. A study of the minimum pressure in a trailing vortex system［EB/OL］. ［20160117］. https:∥www.researchgate.net/publication/235159054_A_STUDY_OF_THE_MINIMUM_PRESSURE_IN_A_TRAILING_VORTEX_SYSTEM.
［9］BREWER W H, PARK J T. High Reynolds number boundary layer scaling on a large hydrofoil ［EB/OL］.［20160117］. https:∥www.researchgate.net/publication/277861720_High_Reynolds_Number_Boundary_Layer_Scaling_on_a_Large_Hydrofoil_HIFOIL.

[1]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[2]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[3]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[4]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[5]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[6]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[7]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[8]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[9]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[10]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[11]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[12]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[13]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[14]	QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778.
[15]	WU Jin, MIN Yu, YANG Xiaodie, MA Simin . Micro-Expression Recognition Algorithm Based on Information Entropy Feature[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 589-599.