杆系结构静/动力学计算的直接方法

摘要/Abstract

摘要： 摘要：针对有限单元法计算精度受网格密度制约的问题，提出一种求任意复杂杆系静、动力学问题精确解的方法.该方法基于节点分析法，逐个节点列位移相容方程和内力平衡方程，以谱系数作为未知数，杆件变形和截面内力则采用相应问题的精确解来描述.用代数符号化的方式，对方程系数矩阵的组建过程进行了详细描述，为通用程序编制提供依据.对建模过程中的分布式载荷和铰接接头的处理方法进行了探讨并给出处理方法.通过平面钢架屈曲分析和空间管路谐响应分析，证实所提方法具有计算精度高、划分单元数少的特点，特别适合于需要精确解的场合.

关键词: 解析解, 节点法, 框架, 杆系, 梁

Abstract: Abstract： The precision of finite element method is restricted by mesh density. To solve this problem, an analytical method for arbitrary complex bar system was proposed based on the nodal method. The nodal compatibility equation of displacement and the equilibrium equation of internal force were considered. The spectral coefficients were treated as the unknowns. The deformation and internal section force were described by the exact solutions of corresponding problems. The process of the construction of the coefficient matrix of the equation of the system was illustrated in an algebraic symbolic way, providing basis for general program development. Two special modelling procedures, distributed load and hinge joint, were investigated and given. A plane steel frame buckling analysis and a space pipe line harmonic analysis were launched. The results confirm that the present method is highly precise and requires a small number of elements. The method is well suited for the requirement of analytical solutions.

Key words: analytical solution, nodal method, frame, bar system, beam

中图分类号:

TU 32

周俊a，饶柱石b，塔娜a. 杆系结构静/动力学计算的直接方法[J]. 上海交通大学学报（自然版）, 2016, 50(01): 52-58.

ZHOU Juna，RAO Zhushib，TA Naa. A Direct Approach to Skeletal Structures Statics and Dynamics [J]. Journal of Shanghai Jiaotong University, 2016, 50(01): 52-58.

参考文献

［1］冯康, 秦孟兆. Hamilton动力体系的Hamilton算法［J］. 自然科学进展, 1991(2):102112. ［2］SHARIYAT M, ASEMI K. 3D Bspline finite element nonlinear elasticity buckling analysis of rectangular FGM plates under nonuniform edge loads, using a micromechanical model［J］. Composite Structures, 2014, 112: 397408. ［3］袁驷, 王永亮, 徐俊杰. 二维自由振动的有限元线法自适应分析新进展［J］. 工程力学, 2014, 31(1):1522. YUAN Si, WANG Yongliang, XU Junjie. New progress in selfadaptive FEMOL analysis of 2D free vibration problems［J］. Engineering Mechanics, 2014, 31(1):1522. ［4］李艳, 王媛, 汤琴, 等. 考虑结合部耦合的结构梁的边界元解析方法研究［J］. 机械强度, 2015, 37(2):300306. LI Yan, WANG Yuan, TANG Qin, et al. Study on boundary element method analysis of structural beam with coupled joints［J］. Journal of Mechanical Strength, 2015, 37(2):300306. ［5］谷超豪, 李大潜, 陈恕行, 等. 数学物理方程［M］. 2版. 北京:高等教育出版社, 2002: 165170. ［6］LIU G R, ZHANG G Y, ZONG Z, et al. Meshfree cellbased smoothed alpha radial point interpolation method (CSα RPIM) for solid mechanics problems［J］. International Journal of Computational Methods, 2013, 10(4): 1350020. ［7］CHALLAMEL N, WANG C M, ELISHAKOFF I. Discrete systems behave as nonlocal structural elements: Bending, buckling and vibration analysis［J］. European Journal of Mechanics, A/Solids, 2014, 44:12535. ［8］董宇, 杨翊仁, 鲁丽. 基于微分求积法的轴向流作用下叠层板的稳定性和模态分析［J］. 振动工程学报, 2015, 28(2):197202. DONG Yu, YANG Yiren, LU Li. Buckling and modal analysis of coupled parallel flexible plates in an axial flow using the differential quadrature method［J］. Journal of Vibration Engineering, 2015, 28(2):197202. ［9］ABBAS L K, BESTLE D, RUI X T. Transfer matrix method for the determination of the free vibration of two elastically coupled beams［J］. Applied Mechanics and Materials, 2013, 372: 301304. ［10］沈小璞. 工程结构分析的状态空间理论及其应用［D］.合肥:合肥工业大学研究生院,2009. ［11］黄修长, 徐时吟, 章振华, 等. 利用波动法研究曲梁结构中的波形转换和能量传递［J］. 振动与冲击, 2012, 31(8):3846. HUANG Xiuchang, XU Shiyin, ZHANG Zhenhua, et al, Application of wave approach in wave mode conversion and energy transmission of curved beams［J］. Journal of Vibration and Shock, 2012, 31(8):3846. ［12］张娇, 聂国华. 带有全铰节点的三维杆系结构静力分析的回传波射矩阵法研究［J］. 力学季刊, 2013, 34(2):199206. ZHANG Jiao, NIE Guohua. Method of reverberationray matrix for static analysis of 3d barsystem structures containing completely hinged joints［J］. Chinese Quarterly of Mechanics, 2013, 34(2):199206. ［13］袁驷, 叶康生, Williams F W, 等. 杆系结构自由振动精确求解的理论和算法［J］. 工程力学, 2005, 22(增刊):16. YUAN Si, YE Kangsheng, WILLIAMS F W, et al. Theory and algorithm of the exact method for free vibration problems of skeletal structures［J］. Engineering Mechanics, 2005, 22(Sup):16. ［14］Shirmohammadi F, Bahrami S, Saadatpour M M，et al. Modeling wave propagation in moderately thick rectangular plates using the spectral element method［J］. Applied Mathematical Modelling, 2015, 39(12): 34813495. ［15］周俊, 塔娜, 饶柱石. 杆系结构振动计算的解析节点法［C］//第十届全国振动理论及应用学术会议论文集. 南京:南京航空航天大学出版社, 2011: 625634.

[1]	吴怀娜, 冯东林, 刘源, 蓝淦洲, 陈仁朋. 基于门式抗浮框架的基坑开挖下卧隧道变形控制[J]. 上海交通大学学报, 2022, 56(9): 1227-1237.
[2]	李高阳, 贾爱亭, 洪波, 李湘文, 高佳篷. 大型箱型梁高速GMAW三维位姿快速估计方法[J]. 上海交通大学学报, 2022, 56(6): 794-800.
[3]	冯国辉, 徐兴, 侯世磊, 范润东, 杨开放, 管凌霄, 徐长节. 基于Kerr地基模型的基坑开挖引起下卧既有隧道受力变形[J]. 上海交通大学学报, 2022, 56(4): 474-485.
[4]	赵朋飞, 薛昕, 杨成. 模拟碱骨料反应引起的箍筋端部锚固退化对钢筋混凝土梁受剪性能的影响[J]. 上海交通大学学报, 2021, 55(6): 681-688.
[5]	张力文, 徐齐平, 刘锦阳. 软体尺蠖爬行机器人建模与仿真分析[J]. 上海交通大学学报, 2021, 55(2): 149-160.
[6]	魏利屾, 冯宇昂, 方家琨, 艾小猛, 文劲宇. 现货市场环境下新能源并网接入对市场出清的影响[J]. 上海交通大学学报, 2021, 55(12): 1631-1639.
[7]	蔡文涛, 王春江, 滕念管, 文泉. 超高速磁浮轨道梁体系的跨平台耦合振动分析[J]. 上海交通大学学报, 2021, 55(10): 1228-1236.
[8]	朱宏伟, 陆志强. 考虑人力资源排班的资源受限项目调度问题建模与优化[J]. 上海交通大学学报, 2020, 54(6): 624-635.
[9]	范晓真, 许海明, 徐长节, 方焘, 谭勇. 非对称开挖砂性土基坑刚性支护结构解析解[J]. 上海交通大学学报, 2020, 54(4): 397-405.
[10]	李云龙, 宋振华, 刘伟鹏, 张进, 冯辉. 动基座对准机翼挠曲变形补偿方法研究[J]. 空天防御, 2020, 3(3): 131-136.
[11]	聂小春，晏致涛，施菁华，游溢. 双柱悬索拉线塔的精细化模拟及模型分析[J]. 上海交通大学学报, 2019, 53(9): 1066-1073.
[12]	潘佳禾，廖晨聪，陈锦剑. 孤立波作用下埋管斜坡海床及海底管道的响应分析[J]. 上海交通大学学报, 2019, 53(8): 898-906.
[13]	任晨辉，杨德庆. 余弦形预制双曲梁非线性隔振器的隔振性能[J]. 上海交通大学学报, 2019, 53(7): 852-859.
[14]	卫旭敏, 张传荣, 张恩铭, 郭洪, 吴文龙, 张荆柯. 基于ANSYS的短抬梁结构优化设计[J]. 海洋工程装备与技术, 2018, 5(增刊): 149-153.
[15]	应宏伟1，沈华伟1，张金红2，朱成伟1. 水位波动条件下盾构极限支护压力半解析研究[J]. 上海交通大学学报（自然版）, 2018, 52(8): 982-990.