有提前期柔性的供应链协调与风险分摊

摘要/Abstract

摘要：

摘要：针对合同制造环境下的需求不确定性导致提前期发生变动而影响高科技产品供应链的上下游决策并产生激励冲突，建立了一种有提前期柔性的供应链协调模型.通过提前期柔性所提供的期权机制来建立采购商和供应商之间基于斯坦伯格博弈的合同谈判过程，使采购商和供应商共同确定合理的交付提前期的变动幅度、柔性成本分摊比例和最优订货策略.研究发现，这种双向操作的风险分摊机制能使高科技供应链渠道达到帕累托最优，从而使供应链协调、改进供应链绩效.

关键词: , 高科技产业, 需求不确定性, 提前期柔性

Abstract:

Abstract： In the environment of contract manufacturing, demand uncertainty often leads to variation of delivery lead-time and impacts on upstream and downstream decision-making in innovative products supply chain and generates incentive conflicts. A supply chain coordination model provides a Stackelberg game process, which is established by a real option of lead-time flexibility between suppliers and buyers. It makes suppliers and buyers to determine their right policies on the reasonable variable magnitude of delivery lead-time, flexible cost-sharing ratio and optimal order policy. It is found out that this two-way operation of risk sharing mechanisms may make supply chain channel for innovative products to achieve Pareto optimization, thus coordinates the whole supply chain and improves supply chain performance.

Key words: hi-tech industries, demand uncertainty, lead-time flexibility

中图分类号:

F 253.4

张以彬1，龙静2，陈俊芳2. 有提前期柔性的供应链协调与风险分摊[J]. 上海交通大学学报（自然版）, 2015, 49(04): 531-536.

ZHANG Yibin1,LONG Jing2,CHEN Junfang2. A Mechanism of Supply Chain Coordination and Risk Sharing Through Lead-Time Flexibility[J]. Journal of Shanghai Jiaotong University, 2015, 49(04): 531-536.

参考文献

［1］Jin M, Wu S D. Capacity reservation contracts for hightech industry ［J］. European Journal of Operational Research, 2007, 176:16591677.

［2］Chopra S, Meindl P. Supply chain management: Strategy, planning and operation. ［M］. 3nd ed. Upper Saddle River, NJ: Prentice Hall Inc, 2008.

［3］Garcia C A, Ibeas A, Herrera J, et al. Inventory control for the supply chain: An adaptive control approach based on the identification of the leadtime［J］. Omega, 2012, 40(3):314327.

［4］孙磊，朱琼，张洁. 随机提前期下考虑动态紧急订货的库存模型［J］. 上海交通大学学报, 2010, 44(3): 317321.

SUN Lei, ZHU Qiong, ZHANG Jie. An inventory model with dynamic emergency ordering under stochastic lead time［J］. Journal Shanghai Jiaotong University, 2010,44(3):317321.

［5］Liu L, Parlar M, Zhu S X. Pricing and lead time decisions in decentralized supply chains［J］. Management Science, 2007, 53(5):713725.

［6］Humair S, Ruark J D, Tomlin B, et al. Incorporating stochastic lead times into the guaranteed service model of safety stock optimization［J］. Interfaces, 2013, 43(5):421434.

［7］Das S K, AbdelMalek L. Modeling the flexibility of order quantities and leadtimes in supply chains［J］. International of Production Economics, 2003，85:171181.

［8］Milner J M, Kouvelis P. Order quantity and timing flexibility in supply chains: The role of demand characteristics ［J］. Management Science, 2005, 51(6): 970985.

［9］Tomlin B. On the value of mitigation and contingency strategies for managing supply chain disruption risks［J］. Management Science, 2006, 52(5):639657.

[1]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[2]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[3]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[4]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[5]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[6]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[7]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[8]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[9]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[10]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[11]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[12]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[13]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[14]	QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778.
[15]	WU Jin, MIN Yu, YANG Xiaodie, MA Simin . Micro-Expression Recognition Algorithm Based on Information Entropy Feature[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 589-599.