上海交通大学学报(自然版) ›› 2014, Vol. 48 ›› Issue (1): 74-80.

• 交通运输 • 上一篇    下一篇

螺旋桨CFD不确定度及叶形对桨叶变形的影响

周振龙,朱锡,张帅
  

  1. (海军工程大学 船舶与海洋工程系,  武汉 430033)
     
     
     
  • 收稿日期:2013-01-12
  • 基金资助:

    国防基础研究基金项目(4010405030101)资助

Propeller CFD Uncertainty and  Influence of  Blade Geometry on Its Deformation

ZHOU Zhenlong,ZHU Xi,ZHANG Shuai
  

  1. (Department of Naval Architecture Engineering, Naval University of Engineering, Wuhan 430033, China)
  • Received:2013-01-12

摘要:

 为了研究螺旋桨在水动力作用下的变形特性,通过计算流体力学(CFD)理论,结合雷诺平均NavierStokes方程并选用SST kω湍流模型对438X系列螺旋桨的敞水性能进行数值模拟;针对4381螺旋桨设计了3套网格,并进行了螺旋桨敞水性能的不确定度分析;将CFD软件计算与有限元法求解相耦合,计算所得水动力载荷通过插值技术传递给螺旋桨,以分析桨叶应力分布及其叶梢处的变形情况.结果表明,在水动力载荷作用下,复合材料螺旋桨桨叶将产生明显变形,且不同螺旋桨所产生的侧斜和纵倾等均不同,在复合材料螺旋桨的设计和流固耦合计算中必须加以考虑.
 

关键词: 计算流体力学(CFD), 螺旋桨, 敞水性能, 不确定度, 流固耦合, 变形

Abstract:

In order to study the deformation of propellers under hydrodynamic effect, the 438X (4381, 4382 and 4383) propellers’ open-water performances were calculated based on a RANS equation with shear stress transport (SST) k-ω turbulence model. The uncertainty analysis in computational fluid dynamics (CFD) of 4381 propeller’s openperformance was conducted using three groups of grids. In the coupling progress, the hydrodynamic loads calculated in CFD were transferred to the finite element method (FEM) by the interpolation on the interface between CFD and FEM, and the stress distributions of blades and the deformation of blade tip were obtained. The results show that the blade deformation of composite propeller caused by hydrodynamic loads can be clearly observed. Furthermore, the deformations of skew and rake of different blades tend to be different, which must to be taken into consideration in design of composite propeller and calculation of propeller fluidstructure interaction.
Key words:

Key words: computational fluid dynamics (CFD), propeller, open water characters, uncertainty, fluidstructure interaction (FSI), deformation

中图分类号: