基于局部特征点检测与匹配的微悬臂梁变形受力测量方法

摘要/Abstract

摘要：

提出了一种基于局部特征点检测与匹配的微悬臂梁变形受力测量方法.通过光学显微镜得到微悬臂梁变形前后的图像和基于放大的微悬臂梁表面的散斑纹理特征，在尺度空间中定位具有局部响应极值的LOG（Laplace of Gaussian)特征点，并在LOG特征点周围提取局部仿射不变封闭区域，其质心可以作为具有亚像素精度的特征点位置.由封闭区域构造仿射不变特征描述算子并进行特征点匹配，根据匹配点的位移信息进行悬臂梁弯曲挠度曲线拟合以描述微悬臂梁的弯曲变形，并采用最小二乘法计算悬臂梁受力大小与受力点.通过对实际的微悬臂梁变形图像实验，验证了所提方法的有效性.

关键词: 局部特征点, , 仿射不变特征矢量, , 特征匹配, 微力测量

Abstract:

A method based on local feature point detecting and matching for force measurement of micro-cantilever was proposed. Images of micro-cantilever before and after deformation were obtained by optical microscope. Based on the enlarged speckle texture of the cantilever surface, the LOG (Laplace of Gaussian) feature points with the local extreme response value were detected in the scale space. An affine-invariant closed region was extracted for each LOG feature point. Then the centroid of this closed region could be calculated and treated as a feature point with subpixel positioning. Affine-invariant feature descriptors could be constructed and used for the matching of the corresponding points in images before and after deformation. The deformation of the microcantilever could be described by deflection curve obtained by fitting the displacement of the matching points， and then the force value as well as position applied by the loader on the cantilever were calculated using the least square method. The performance of the proposed method was verified by experiments based on actual deformation of microcantilever.

Key words: local feature point, affine invariant feature descriptor, feature matching, micro-force measurement

中图分类号:

刘洪涛，梁振宁，胡文，莫锦秋，王石刚. 基于局部特征点检测与匹配的微悬臂梁变形受力测量方法[J]. 上海交通大学学报（自然版）, 2013, 47(12): 1842-1847.

LIU Hongtao,LIANG Zhenning,HU Wen,MO Jinqiu,WANG Shigang. A Method for Deformation and Force Measurement of Micro-Cantilever Based on Local Feature Point Detecting and Matching[J]. Journal of Shanghai Jiaotong University, 2013, 47(12): 1842-1847.

参考文献

［1］Li Xide, Xie Huimin, Kang Yilan, et al. A brief review and prospect of experimental solid mechanics in China ［J］. Acta Mechanica Solida Sinica, 2010, 23(6):498548.

［2］Zhang Duanqin, Chu Jinkui. Mechanical characterization of electroplated Ni films by microtensile testing［J］. Chinese Journal of Mechanical Engineering, 2009, 22(4):557561.

［3］Sader J E, Sanelli J A, Adamson B D, et al. Spring constant calibration of atomic force microscope cantilevers of arbitrary shape［J］. Review of Scientific Instruments, 2012, 83(10):103705.

［4］Butt H J, Cappella B, Kappl M. Force measurements with the atomic force microscope: Technique, interpretation and applications［J］. Surface Science Reports, 2005, 59(16):1152.

［5］Sun Y, Fry S N, Potasek D P, et al. Characterizing fruit fly flight behavior using a microforce sensor with a new combdrive configuration［J］. Journal of Microelectromechanical Systems, 2005, 14(1):411.

［6］Richard S G, Mark G, Reitsma J A, et al. Atomic force microscope cantilever flexural stiffness calibration:Toward a standard traceable method［J］. Journal of Research of the National Institute of Standards and Technology, 2011, 116(4):703727.

［7］Jon R P, John A K, David B N, et al. Review of SI traceable force metrology for instrumented indentation and atomic force microscopy［J］. Measurement Science and Technology, 2005, 16(11):21292137

［8］Li Xide, Yan Yang, Cheng Wei . In situ and realtime tensile testing of thin films using doublefieldofview electronic speckle pattern interferometry［J］. Measurement Science and Technology, 2004, 15(1):7583.

［9］Jacquot P. Speckle interferometry: A review of the principal methods in use for experimental mechanics applications［J］. Strain, 2008, 44(1):5769.

［10］Park J H, Kang D J, Shin M S, et al. Easy calibration method of vision system for insitu measurement of strain of thin films［J］. Transactions of Nonferrous Metals Society of China, 2009, 19(1):243249.

［11］Sharpe W N, Pulskamp J, Gianola D S, et al. Strain measurements of silicon dioxide microspecimens by digital imaging processing［J］. Experimental Mechanics, 2007, 47(5):649658.

［12］Pierron F, Green B, Wisnom M R. Fullfield assessment of the damage process of laminated composite openhole tensile specimens. Part I: Methodology［J］. Composites Part A: Applied Science and Manufacturin, 2007, 38(11):23072320.

［13］Pan B, Asundi A, Xie H M, et al. Digital image correlation using iterative least squares and pointwise least squares for displacement field and strain field measurements［J］. Optics and Lasers in Engineering, 2009, 47(78):865874.

［14］胡文, 刘洪涛, 胡春, 等. 基于伪Zernike矩不变量分析的视觉测力［J］. 上海交通大学学报, 2013, 47(4):589593.

HU Wen, LIU Hongtao, HU Chun, et al. Visual force measurement using pseudo zernike moment invariants［J］. Journal of Shanghai Jiaotong University, 2013, 47(04):589593.

［15］Tuytelaars T, Mikolajczyk K. Local invariant feature detectors: A survey［J］. Foundations and Trends in Computer Graphics and Vision, 2007, 3(3): 177280

［16］Mikolajczyk K, Tuytelaars T, Schmid C, et al. A comparison of affine region detectors［J］. International Journal of Computer Vision, 2005, 65(12): 4372.

［17］Suk T, Flusser J. Affine moment invariants generated by graph method［J］. Pattern Recognition, 2011, 44(9): 20472056.

[1]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[2]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[3]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[4]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[5]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[6]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[7]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[8]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[9]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[10]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[11]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[12]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[13]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[14]	QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778.
[15]	WU Jin, MIN Yu, YANG Xiaodie, MA Simin . Micro-Expression Recognition Algorithm Based on Information Entropy Feature[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 589-599.