H型梁与矩形钢管柱单板简支连接性能

上海交通大学学报（自然版） ›› 2013, Vol. 47 ›› Issue (10): 1542-1547.

H型梁与矩形钢管柱单板简支连接性能

张龙a，李国强b，陆烨a，刘玉姝a

(同济大学 a.建筑工程系; b.土木工程防灾国家重点实验室，上海 200092）

收稿日期:2012-12-21 出版日期:2013-10-30 发布日期:2013-10-30
基金资助:
国家自然科学基金项目（51108340），国家科技支撑计划资助项目(2012BAJBB02)

Single Shear Plate Connections between Rectangular Tubular Columns and H-shaped Beams

ZHANG Longa，LI Guoqiangb，LU Yea，LIU Yushua

(a.Department of Building Engineering; b.State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University, Shanghai 200092, China)

Received:2012-12-21 Online:2013-10-30 Published:2013-10-30

摘要/Abstract

摘要：

对H型梁和矩形管柱的单板简支连接的受力性能进行分析,着重研究节点连接对矩形管柱壁的影响.通过建立理论计算模型，提出了该连接节点的设计原则，并通过试验和有限元分析来验证理论模型的正确性，探讨该种连接形式的优点和缺点，得到了适合工程设计人员使用的该连接节点的设计公式.

关键词：
中图分类号：文献标志码： A

关键词: 梁柱连接节点, 矩形钢管柱, 柱壁, 单板

Abstract:

This paper analyzed the performance of the single shear plate connections between rectangular tubular columns and Hshaped beams, mainly focusing on the effect of the connection on the RHS(Rectangular Hollow Section) column wall. A design principle for this connection was derived based on the theoretical calculation model established. Experiment and FEM analysis of this connection were conducted to check the accuracy of the design system and investigate the advantages and disadvantages of the connection. Then, the design formula suitable for engineers and designers was summarized.

Key words: beam-column connection, rectangular tubular columns, column wall, single shear plate

中图分类号:

TU 391

张龙a，李国强b，陆烨a，刘玉姝a. H型梁与矩形钢管柱单板简支连接性能[J]. 上海交通大学学报（自然版）, 2013, 47(10): 1542-1547.

ZHANG Longa，LI Guoqiangb，LU Yea，LIU Yushua. Single Shear Plate Connections between Rectangular Tubular Columns and H-shaped Beams[J]. Journal of Shanghai Jiaotong University, 2013, 47(10): 1542-1547.

参考文献

［1］张梁,陈以一.方钢管柱与H型钢梁连接形式评述［J］.结构工程师，2009，25(4):129137.

ZHANG Liang，CHEN Yiyi. Overview of connection types between rectangular tubular columns and Hshaped beams［J］. Structural Engineers，2009，25(4): 129137.

［2］Sherman D R. Simple framing connections to HSS columns［C］∥

Proceedings of the National Steel Construction Conference.San Antonio:AISC, 1995:116.

［3］GONG Yanglin. Plastic behavior of shear tabs welded to flexible wall support ［J］. Journal of Structural Engineering, 2010,136(10): 11971204.

［4］Packer J A, Kosteski N. Welded TeetoHSS connections ［J］. Journal of Structural Engineering, 2003,129(2):151159.

［5］Cao J J, Packer J A, Kosteske N. Design guidelines for longitudinal plate to HSS connections［J］. Journal of Structural Engineering, 1998, 124(7): 784 791.

［6］The Steel Construction Institute and The British Constructional Steelwork Association Limited. Joints in steel construction simple connections［M］. British : SCI/BCSA Connections Group,2002: 150155.

［7］Kurobane Y, Packer J A, Wardenier J, et al. Design guide for structural hollow section column connections ［M］. Germany: TVVerlag GmbH, Kln, 2004: 3134.

［8］American Institute of Steel Construction. Hollow structural sections connections manual［M］. 3rd ed.Chicago:［s.n.］, 1997:131145.

［9］郭兵，王磊，王颖，等.钢框架梁柱连接节点转动刚度试验研究［J］.建筑结构学报，2011，32(10)：8289.

GUO Bing，WANG Lei，WANG Ying，et al. Experimental study on rotational stiffness of steel frame beamcolumn connections［J］. Journal of Building Structures，2011，32(10):8289.

［10］王玉镯，傅传国.ABAQUS结构工程分析及实例详解［M］.北京：中国建筑工业出版社，2010：5256.

［11］曹金凤，石亦平.ABAQUS有限元分析常见问题解答［M］.北京：机械工业出版社，2009：234263.

［12］Astaneh A. Demand and supply of ductility in steel shear connections［J］. Journal of Constructional Steel Research,1989, 14(1):119.

[1]	王玄玄, 黄玉林, 赵金城, 段立平. Revit-Abaqus模型转换接口的开发与应用[J]. 上海交通大学学报, 2020, 54(2): 135-143.
[2]	邱介尧a, 李国强a, b. 开圆孔波纹腹板钢梁弹性抗剪屈曲[J]. 上海交通大学学报, 2016, 50(03): 357-363.