[1]周苏,纪光霁,陈凤祥,等. 车用质子交换膜燃料电池系统技术评估与分析[J]. 汽车工程,2010,32(9):749756.ZHOU Su, JI Guangji, CHEN Fengxiang, et al. The state of the art of PEMFC for automotive application [J]. Automotive Engineering, 2010,32(9):749756.[2]Blunier B, Miraoui A. Proton exchange membrane fuel cell air management in automotive applications [J]. Journal of Fuel Cell Science and Technology, 2010, 7: 041007104100711.[3]Mitsuda K, Murahashi T. Air and fuel starvation of phosphoric acid fuel cells: A study using a single cell with multireference electrodes [J]. Journal of Applied Electrochemistry, 1991, 21(6): 524530.[4]Reuter J, Beister U, Liu N, et al. Control of a fuel cell air supply module (ASM) [C]∥SAE Paper. 2004011009.[5]张天贺,全书海, 张立炎,等. 车用PEMFC空气供给系统建模与模糊PID控制研究[J]. 系统仿真学报,2007,3(4):211216.ZHANG Tianhe, QUAN Shuhai, ZHANG Liyan, et al. Research on modeling and fuzzy PID control of air supply system in PEMFC vehicle [J]. System Simulation Technology, 2007,3(4):211216.[6]Niknezhadi A, Miguel A, Cristian K, et al. Design and implementation of LQR/LQG strategies for oxygen stoichiometry control in PEM fuel cells based systems [J]. Journal of Power Sources, 2011, 196 (9): 42774282.[7]GarciaGabin W, Dorado F, Bordons C. Realtime implementation of a sliding mode controller for air supply on a PEM fuel cell [J]. Journal of Process Control, 2010, 20(3):325336.[8]Arce A, Ramirez D R, Real A J, et al. Constrained explicit predictive control strategies for PEM fuel cell systems[C]∥Proceedings of the IEEE Conference on Decision and Control. New Orleans, LA:[s.n.],2007: 60886093.[9]Michael A D, Joerg W, Harald A, et al. Modelbased control of cathode pressure and oxygen excess ratio of a PEM fuel cell system[J]. Journal of Power Sources, 2008, 176 (2): 515522.[10]Zhong Z D, Huo H B, Zhu X J, et al. Adaptive maximum power point tracking control of fuel cell power plant[J]. Journal of Power Sources, 2008, 176(1): 259269.[11]Gruber J K, Bordons C, Dorado F. Nonlinear control of the air feed of a fuel cell[C]∥Proceedings of 2008 American Control Conference. Washington, USA: [s.n.], 2008: 11211126.[12]Gilbert E, Kolmanovsky I. Fast reference governor for systems with state and control constraints and disturbance inputs[J]. International Journal of Robust and Nonlinear Control, 1999, 9 (15): 11171141.[13]Sun J, Kolmanovsky I V. Load governor for fuel cell oxygen starvation protection: A robust nonlinear reference governor approach [J]. IEEE Transaction on Control Systems Technology, 2005, 13(6): 911920.[14]Vahidi A, Kolmanovsky I, Stefanopoulou A. Constraint handling in a fuel cell system: A fast reference governor approach [J]. IEEE Transactions on Control System Technology, 2007, 15(1): 8698.[15]Michael A D, Simon J W, Eberhard P H. Prevention of fuel cell starvation by model predictive control of pressure, excess ratio, and current[J]. Journal of Power Sources, 2009, 190 (1): 8691.[16]ChanChiao L, MinJoong K, Huei P, et al. Systemlevel model and stochastic optimal control for a PEM fuel cell hybrid vehicle [J]. Journal of Dynamic Systems, Measurement and Control, 2006, 128 (4): 878890.[17]Pukrushpan J T, Stefanopoulou A G, Huei P. Modeling and control for PEM fuel cell stack system[C]∥American Control Conference. Anchorage: [s.n.], 2002: 31173122. |