上海交通大学学报

上海交通大学学报（自然版） ›› 2012, Vol. 46 ›› Issue (10): 1632-1636.

• 金属学与金属工艺 • 上一篇    下一篇

冷锻模具材料高速基体钢应变控制室温疲劳性能

张莹1，胡成亮1，赵震1，李爱平2   

  1. （1.上海交通大学 模具CAD国家工程研究中心，上海 200030； 2.同济大学 机械工程学院，上海 200092）
  • 收稿日期:2011-11-04 出版日期:2012-10-30 发布日期:2012-10-30
  • 基金资助:

    国家科技重大专项课题（2011ZX04016051）,国家自然科学基金（50975175）资助项目

Strain-Controlled Fatigue Properties at Room Temperature of a High-Speed Matrix Steel Used as a Cold Forging Tool Material  

 ZHANG  Ying-1, HU  Cheng-Liang-1, ZHAO  Zhen-1, LI  Ai-Ping-2   

  1. (1. National Engineering Research Center of Die & Mold CAD, Shanghai Jiaotong University, Shanghai 200030, China; 2. College of Mechanical Engineering, Tongji University, Shanghai 200092, China)
  • Received:2011-11-04 Online:2012-10-30 Published:2012-10-30

摘要： 对冷锻模具材料高速基体钢进行了室温下的单轴静态拉伸试验和应变控制单轴对称拉压低周疲劳试验，获得了静态拉伸力学性能和低周疲劳性能参数.通过对试验数据进行拟合，得到了高速基体钢材料在室温下静态单调拉伸应力-应变关系、循环应力-应变关系以及循环应变-寿命曲线.试验结果表明，该模具材料在本试验控制的循环应变幅范围内发生了循环软化，疲劳断裂之前未观察到明显的应力饱和现象.以控制应变幅为1.5%的试样为例，对材料的低周疲劳行为特性进行了分析.材料的循环应力响应分为明显软化，软化效应减弱和瞬时断裂3个阶段.    

关键词: 冷锻模具材料, 低周疲劳, 高速基体钢, 应变控制, 疲劳性能

Abstract: Static uniaxial tension experiment and strain-controlled tension-compression fatigue experiments were conducted at room temperature to cold forging tool material, a matrixtype high speed steel. Mechanical property parameters under static tension and low cycle fatigue loading conditions were acquired through the experiments. Static monotonic tension strain-stress relationship, cyclic strain-stress relationship and cyclic strain-life relationship of the steel at room temperature were derived from regression of the experiment data. The experimental results show that cyclic softening happens to the tool material at all levels of controlled cyclic strain amplitudes in this study. No visible stress saturation is observed before fatigue failure occurrs. A specimen at the controlled strain amplitude of 1.5% was used as an example to investigate the LCF behavior characteristics of this material. The cyclic stress response shows a variation with three stages: the obvious softening stage, the slow softening stage and the final rupture stage.

Key words: cold forging tool material, low cycle fatigue (LCF), high-speed matrix steel, strain-controlled, fatigue property

中图分类号: