高强度合金硼铸铁组织成分与切削性能研究

上海交通大学学报（自然版） ›› 2012, Vol. 46 ›› Issue (07): 1049-1053.

高强度合金硼铸铁组织成分与切削性能研究

安庆龙，牛秋林，明伟伟，陈明

（上海交通大学机械与动力工程学院，上海 200240）

收稿日期:2011-06-15 出版日期:2012-07-30 发布日期:2012-07-30
基金资助:
国家自然科学基金资助项目(51105253, 50935001)，国家重点基础研究发展计划（973）项目(2010CB731703, 2011CB706804),国家科技重大专项课题(2011ZX04015031, 2012ZX04003051, 2012ZX04012021, 2012ZX04003031)

Study on the Microstructure, Chemical Gradient and Machinablity of High-strength Alloy Boron Cast Iron

AN Qing-Long, NIU Qiu-Lin, MING Wei-Wei, CHEN Ming

(School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China)

Received:2011-06-15 Online:2012-07-30 Published:2012-07-30

摘要/Abstract

摘要： 摘要：
合金硼铸铁具有高硬度、高强度以及良好的耐磨性和耐热性，是高速机车柴油机气缸套的主流材料.文中对气缸套合金硼铸铁的显微组织结构、化学成分和车削加工性能进行了分析评估.结果表明：合金硼铸铁的石墨形态以高强度A型石墨为主；与非涂层和氮铝钛涂层硬质合金刀具相比，赛隆（Sialon）陶瓷刀具具有更优良的性能，可以实现合金硼铸铁气缸套的高效加工. 关键词：
合金硼铸铁；车削；刀具磨损；氮铝钛涂层；赛隆陶瓷中图分类号： TG 113
文献标志码： A

Abstract: Alloy boron cast iron has high property of hardness, high strength, abrasion resistance and heat resistance, which is often used in cylinder liner of highspeed locomotive diesel. The microstructure and chemical composition of the alloy boron cast iron were discussed. The machinability evaluation was carried out by turning tests. The result indicates that the alloy boron cast iron as one kind of Atype graphite cast iron has excellent mechanical property. Sialon ceramic tool shows much better performance compared with uncoated and TiAlN coated P20 carbide tool during high speed cutting of alloy boron cast iron.

Key words: alloy boron cast iron, turning, tool wear, TiAlN coating, Sialon ceramics

安庆龙, 牛秋林, 明伟伟, 陈明. 高强度合金硼铸铁组织成分与切削性能研究[J]. 上海交通大学学报（自然版）, 2012, 46(07): 1049-1053.

AN Qing-Long, NIU Qiu-Lin, MING Wei-Wei, CHEN Ming. Study on the Microstructure, Chemical Gradient and Machinablity of High-strength Alloy Boron Cast Iron[J]. Journal of Shanghai Jiaotong University, 2012, 46(07): 1049-1053.

参考文献

［1］刘炳仁，甄东生，李江，等. 240B型柴油机新型整体ADI平台珩磨网纹气缸套研制［J］. 铁道机车车辆，2006，26(4): 5455.
LIU Bingren, ZHEN Dongsheng, LI Jing, et al. Development of the new overall ADI platform Honing cylinder liner of 240Btype diesel engine ［J］. Railway Locomotive and Car, 2006, 26(4): 5455.
［2］ISO 94512008, Microstructure of cast ironsPart I: Graphite classification by visual analysis ［S］.
［3］杨大春. 硼铸铁汽缸套A型石墨生成及白口消除［J］. 特种铸造及有色合金，2002(5)：4951.
YANG Dachun. “A”type graphite formation and the elimination of the chill layer in boron alloyed cast iron cylinder sleeve［J］. Special Casting & Nonferrous Alloys, 2002(5)：4951.
［4］禇瑾. 高磷含硼活塞铸铁材料的研究［J］. 铸造技术，2005，26(4): 273276.
CHU Jin. Study on high phosphorus boron cast iron of rolling piston ［J］. Foundry Technology, 2005, 26(4): 273276.

［5］岳峰，张松杨. 合金硼铸铁软氮化气缸套的研制［J］. 机车车辆工艺，2009(6): 14.
YUE Feng, ZHANG Songyang. Development of alloy boron cast iron softnitriding cylinder liner ［J］. Locomotive Vehicle Technology, 2009(6): 14.
［6］Pereira A A, Boehs L, Guesser W L. The influence of sulfur on the machinability of gray cast iron FC25 ［J］. Journal of Materials Processing Technology, 2006, 179: 165171.
［7］Ezugwu E O. Key improvements in the machining of difficulttocut aerospace super alloys ［J］. International Journal of Machine Tools and Manufacture, 2005, 45(12/13): 13531367.
［8］Grzesik W, Rech J, Zak K, et al. Machining performance of pearliticferritic nodular cast iron with coated carbide and silicon nitride cutting tools ［J］. International Journal of Machine Tools and Manufacture, 2009, 49: 125133.
［9］Pavel R, Marinescu J, Deis M, et al. Effect of tool wear on surface finish for a case of continuous and

interrupted hard turing ［J］. Journal of Materials Processing Technology, 2005, 170: 341349.
［10］Sharman A R C, Hughes J L, Ridgway K. Workpiece surface integrity and tool life issues when turning inconel 718 nicked based superalloy［J］. Machining Science and Technology, 2004, 8(3): 399414.