上海交通大学学报(自然版) ›› 2012, Vol. 46 ›› Issue (05): 661-665.
• 能源与动力工程 • 下一篇
葛冰, 臧述升, 郭培卿
收稿日期:
2011-06-30
出版日期:
2012-05-28
发布日期:
2012-05-28
基金资助:
上海市重大科技专项课题资助(09DZ1200705)
GE Bing, ZANG Shu-Sheng, GUO Pei-Qing
Received:
2011-06-30
Online:
2012-05-28
Published:
2012-05-28
摘要: 利用激光粒子图像速度场测量技术对环型多孔式喷嘴的加湿与不加湿旋流扩散燃烧流场进行了实验研究,分析了湿度对旋流扩散燃烧流场的影响.结果表明,随着燃烧流场湿度增大,火焰明显变暗,火焰宽度和高度增大,回流区漩涡与燃烧器出口和喷嘴轴线间的距离减小,轴线上最大回流速度降低,轴线最大回流速度点与喷嘴的距离增加,逆流区宽度和喷嘴旋转射流扩展角减小,流场轴向出口的不均匀系数增大.
中图分类号:
葛冰, 臧述升, 郭培卿. 多孔式喷嘴加湿旋流扩散燃烧流场的实验研究[J]. 上海交通大学学报(自然版), 2012, 46(05): 661-665.
GE Bing, ZANG Shu-Sheng, GUO Pei-Qing. Experimental Investigation on Humid Air Diffustion Combustion in a Multihole Nozzle Swirl Burner[J]. Journal of Shanghai Jiaotong University, 2012, 46(05): 661-665.
[1]Delattin F, Bram S, Knoops S, et al. Effects of steam injection on microturbine efficiency and performance[J]. Energy, 2008, 33 (2): 241247. [2]Zhao Hongbin, Yue Pengxiu. Performance analysis of humid air turbine cycle with solar energy for methanol decomposition [J]. Energy, 2011, 36 (5): 23722380.[3]Zhao Hongbin, Yue Pengxiu. Study of humid air turbine cycle with external heat source for air humidification [J]. International Journal of Energy Research, 2010, 34 (6): 523534.[4]Hidetoshi K, Shigeo H, Takanori S, et al. Development of elemental technologies for advanced humid air turbine system [J]. Journal of Engineering for Gas Turbines and Power, 2008, 130 (3): 0317011.[5]Ongiro A O, Ugursal V I, Altaweel A M. Technoeconomic modelling of integrated advanced power cycles [J]. International Journal of Global Energy Issues, 2001, 15 (3): 195219.[6]Mortaza Y. Thermoeconomic optimization of the part flow evaporative gas turbine cycles [C]//Proceedings of the ASME Turbo Expo. Berlin, Germany: ASME, 2008, GT200851144. [7]Ge B, Zang S S, Gu X. Experimental study on velocity characteristic distribution in nonpremixed circulardisc stabilized flames [C]//Proceedings of the ASME Turbo Expo. Montreal, Canada: ASME, 2007, GT200727098.[8]葛冰, 臧述升, 顾欣. 加湿回流湍流扩散燃烧流场的实验研究[J].上海交通大学学报,2006,40 (8): 12871292.GE Bing, ZANG Shusheng, GU Xin. Experimental study on humid air reverse turbulent diffusion combustion field [J]. |
[1] | 王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49. |
[2] | 袁振钦, 邹 科, 孙亚峰, 刘 刚, 屈 衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55. |
[3] | 王 娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31. |
[4] | 陈 欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36. |
[5] | 尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57. |
[6] | MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502. |
[7] | ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481. |
[8] | 安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-. |
[9] | KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162. |
[10] | ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230. |
[11] | ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9. |
[12] | HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39. |
[13] | WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713. |
[14] | QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778. |
[15] | WU Jin, MIN Yu, YANG Xiaodie, MA Simin . Micro-Expression Recognition Algorithm Based on Information Entropy Feature[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 589-599. |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||