40Cr 钢 的 高 温 蠕 变 行 为

摘要/Abstract

摘要： 研究了40Cr钢在不同温度和应力水平下的蠕变行为，并根据实验数据绘制得到蠕变曲线.在实验条件下，40Cr钢的蠕变曲线呈现出较长的稳态阶段和较短的减速阶段与加速阶段.并且其蠕变的稳态速率可以用NortonPower规律来描述，蠕变数据符合MonkmanGrant关系的一般形式.同时，基于实验数据，建立了40Cr钢高温蠕变的非线性本构方程，并通过最小二乘法确定本构方程中的参数.将该本构方程计算得到的结果与实验数据进行了比较，发现用该本构方程可以较好地描述40Cr钢的蠕变行为.

关键词: , 40Cr钢, 蠕变, 本构关系

Abstract: The creep behaviors of 40Cr steel were investigated at various temperatures and stresses. And the creep curves based on the experimental datas were plotted. It can be observed that the steady creep and the accelerating creep processes are the dominant parts of the creep curves of the 40Cr steel in the experimental conditions. Besides，the steady creep rates can be described by the NortonPower law and the creep data can be fitted by the MonkmanGrant relationship. Then, a nonlinear constitutive equation for the 40Cr steel was proposed according to the experimental data. The parameters of the equation were determined by the least square method. At last, it can be found that the proposed equation can describe the creep behaviors of the 40Cr steel quite well by comparing the theoretical results calculated by the proposed equation and the experimental data.

Key words: 40Cr steel, creep, constitutive equation

中图分类号:

O 344.6

杨垂锦, 陈巨兵. 40Cr 钢的高温蠕变行为 [J]. 上海交通大学学报（自然版）, 2012, 46(02): 301-305.

YANG Chui-Jin, CHEN Ju-Bing. The Constitutive Relationship of Elevated Temperature Creep of 40Cr Steel[J]. Journal of Shanghai Jiaotong University, 2012, 46(02): 301-305.

[1]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[2]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[3]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[4]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[5]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[6]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[7]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[8]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[9]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[10]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[11]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[12]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[13]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[14]	QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778.
[15]	WU Jin, MIN Yu, YANG Xiaodie, MA Simin . Micro-Expression Recognition Algorithm Based on Information Entropy Feature[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 589-599.