高强钢闭口帽形结构准静态轴向压溃实验

上海交通大学学报（自然版） ›› 2011, Vol. 45 ›› Issue (11): 1661-1667.

高强钢闭口帽形结构准静态轴向压溃实验

牛建辉，朱平

(上海交通大学机械与动力工程学院上海市数字化汽车车身工程重点实验室，上海 200240)

收稿日期:2010-12-09 出版日期:2011-11-30 发布日期:2011-11-30
基金资助:
国家自然科学基金资助项目（50875164）

Experimental Study on the QuasiStatic Axial Crush Response of High Strength Steel ClosedHat Structures

(School of Mechanical Engineering, Shanghai Key Lab of Digital Autobody Engineering,Shanghai Jiaotong University, Shanghai 200240, China)

Received:2010-12-09 Online:2011-11-30 Published:2011-11-30

摘要/Abstract

摘要： 为了研究成形历史对车身部件冲击变形行为的影响，以点焊连接闭口帽形结构为例，比较了2种高强钢材料——HSLA340和DP590不同成形条件下准静态轴向压溃过程的变形模式和吸能特性.实验结果表明：冲压成形过程导致的结构局部材料强化和几何弱化现象严重影响了帽形结构压缩过程中的屈曲变形模式，使其吸能能力低于折弯构件；大压边力冲压成形构件压溃过程中出现局部板材撕裂现象，该现象与应变历史及应力状态相关；因其独特的低屈强比硬化特性，不同成形条件下的DP590构件变形吸能特性始终优于HSLA340构件.

关键词: 高强钢, 成形条件, 轴向压溃, 吸能特性

Abstract: In order to study the influence of forming history on the crash behavior of auto-body component, axial crush behavior and energy-absorption performance were compared on the spot-welded closed-hat structures fabricated with different forming conditions for two high strength steels, HSLA340 and DP590 respectively. It was proved that the local material strengthening and geometry weakening resulted from the stamping process significantly affect the post-buckling mode of the hat structures subject to axial loading condition. As a result, the energy absorption of stamped components is lower than that of bent component. In addition, the sheet metal tearing is observed on the crushed components formed under high blank-holder-force stamping condition, which is believed to be dependent on both the strain history and stress state. Due to the special character of low yield/ultimate strength ratio of DP590, the energyabsorption performance of DP590 components is always superior to that of HSLA340 components.

Key words: high strength steel, forming condition, axial crush, energy-absorption performance

中图分类号:

TG113.25

牛建辉，朱平. 高强钢闭口帽形结构准静态轴向压溃实验[J]. 上海交通大学学报（自然版）, 2011, 45(11): 1661-1667.

参考文献

［1］Abedrabbo N, Mayer R, Thompson A, et al. Crash response of advanced highstrength steel tubes: Experiment and model［J］. International Journal of Impact Engineering, 2009, 36(8): 10441057.

［2］胡平, 鲍益东, 胡斯博，等. 引入工艺因素的汽车车身部件碰撞仿真分析［J］. 固体力学学报, 2006, 27(2): 148158.

HU Ping, BAO Yidong, HU Sibo, et al. Crash worthiness simulation of automobile body part considering the formability effects of the part sheet metal ［J］. Acta Mechanica Solida Sinica, 2006, 27(2): 148158.

［3］Dutton T, Iregbu S, Sturt R, et al. The effect of forming on the crashworthiness of vehicles with hydroformed frame side rails［J/OL］. SAE Technical Paper, USA: SAE, 1999:1999013208.

［4］Huh H, Kim K P, Kim S H, et al. Crashworthiness assessment of front side members in an autobody considering the fabrication histories［J］. International Journal of Mechanical Science, 2003, 45(10): 16451660.

［5］陈贵江, 康永林, 朱国明, 等. 高强度双相钢DP800成形件碰撞性能仿真分析［J］. 塑性工程学报, 2010, 17(4): 9195.

CHEN Guijiang, KANG Yonglin, ZHU Guoming, et al. The influence of stamping, springback and strain rate on collision performance of highstrength dualphase steel DP800 parts ［J］. J Plasticity Eng, 2010, 17(4): 9195.

［6］Shim H B. Effect of blank shapes on the crashworthiness of stamped parts［J］. Proceedings of the Institution of Mechanical Engineers. Part B: Journal of Engineering Manufacture， 2009, 223(4): 413425.

［7］Thibaud S, Boudeau N, Gelin J C. TRIP steel: Plastic behaviour modelling and influence on functional behaviour［J］. Journal of Materials Processing Technology, 2006, 177(13): 433438.

［8］Wierzbicki T, Bao Y, Lee Y W, et al. Calibration and evaluation of seven fracture models［J］. International Journal of Mechanical Science, 2005, 47(45): 719743.

[1]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[2]	武念铎1，强旭红1，刘晓2，罗永峰1. 考虑螺栓抗弯刚度的T型连接初始刚度计算方法[J]. 上海交通大学学报（自然版）, 2018, 52(12): 1571-1579.
[3]	陈玉喜1，刘亮2，张华军2，陈华斌1，陈善本1. 焊接热输入对低合金高强钢焊缝组织和韧性的影响[J]. 上海交通大学学报（自然版）, 2015, 49(03): 306-309.
[4]	白小敏, 巩建鸣, 王艳飞. 高强钢氢致滞后断裂滞后时间的有限元预测 [J]. 上海交通大学学报（自然版）, 2012, 46(07): 1079-1083.
[5]	郭超群，陈军，陈劼实，徐栋恺，于翔宇，白燕超. 超高强度钢薄板扭曲回弹特性的数值模拟与试验分析[J]. 上海交通大学学报（自然版）, 2010, 44(04): 468-0472.