变工况下周向弯曲风扇叶顶涡声特性

上海交通大学学报（自然版） ›› 2011, Vol. 45 ›› Issue (06): 935-939.

变工况下周向弯曲风扇叶顶涡声特性

金光远1,2，欧阳华1，胡彬彬1，吴亚东1，杜朝辉1

(1. 上海交通大学机械与动力工程学院，上海 200240； 2. 江南大学机械工程学院，江苏无锡 214122)

收稿日期:2010-03-26 出版日期:2011-06-29 发布日期:2011-06-29
基金资助:
国家自然科学基金资助项目(51076101)

Research of Aerodynamic Noise Source in Tip Region of Axial Fans with Circumferential Skewed Blades at Off-Design Conditions

JIN Guang-Yuan-1, 2 , 欧Yang-Hua-1 , HU Bin-Bin-1, WU Ya-Dong-1, DU Chao-Hui-1

(1. School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China; 2. School of Mechanical Engineering, Jiangnan University, Wuxi 214122, Jiangsu, China)

Received:2010-03-26 Online:2011-06-29 Published:2011-06-29

摘要/Abstract

摘要： 采用计算流体力学数值方法研究变工况下周向弯曲低压轴流风扇的叶顶泄漏流动特性，结合涡声理论分析泄漏涡与声源的协同特性，分析叶片不同周向弯曲方向对协同性的影响，并通过近场机匣壁面动态压力测量和远场声学测量，验证叶片周向弯曲方向对近远场声学特性的控制规律.研究表明，泄漏涡声源是周向弯曲叶轮小流量工况下的重要声源，速度矢量与涡矢量的夹角值控制叶顶区域声源强度和分布.近远场实验结果表明，泄漏涡声源与远场声学关系密切.

关键词: , 周向弯曲, 变工况, 泄漏涡, 涡声特性, 协同性

Abstract: Aerodynamic noise source generated by tip leakage flow in circumferential skewed axial fans was studied by CFD simulation and experiments under offdesign conditions. Relationship between tip leakage flow and aerodynamic noise was analyzed based on vortexsound theory of low speed homentropic flow. Synergy between acoustic source and tip leakage vortex was discussed. Pressure test on casing wall and acoustic far field test were conducted to find how the different circumferential skewed direction control acoustic characteristics. The results show that the acoustic source generated by tip leakage vortex of circumferential skewed blades is an important noise source under offdesign conditions. The angle between velocity vector and vortex vector controls the strength and the distribution of the acoustic source in tip clearance region. The acoustic source in tip clearance region is related with the acoustic far field under offdesign conditions.

Key words: circumferential skewed, off-designed, tip leakage vortex, vortex acoustic, synergy

中图分类号:

TH432.1

金光远1, 2, 欧阳华1, 胡彬彬1, 吴亚东1, 杜朝辉1. 变工况下周向弯曲风扇叶顶涡声特性[J]. 上海交通大学学报（自然版）, 2011, 45(06): 935-939.

JIN Guang-Yuan-1, 2 , 欧Yang-Hua-1 , HU Bin-Bin-1, WU Ya-Dong-1, DU Chao-Hui-1. Research of Aerodynamic Noise Source in Tip Region of Axial Fans with Circumferential Skewed Blades at Off-Design Conditions[J]. Journal of Shanghai Jiaotong University, 2011, 45(06): 935-939.

644

HTML			PDF

最新录用	在线预览	正式出版	最新录用	在线预览	正式出版
0	0	0	0	0	644

来源	本网站	其他网站

次数	22	622
比例	3%	97%

摘要

4557

最新录用	在线预览	正式出版

0	0	4557

[1]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[2]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[3]	马航宇, 周笛, 卫宇杰, 吴伟, 潘尔顺. 变工况下基于自适应深度置信网络的轴承智能故障诊断[J]. 上海交通大学学报, 2022, 56(10): 1368-1377.
[4]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[5]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[6]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[7]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[8]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[9]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[10]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[11]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[12]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[13]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[14]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[15]	QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778.