电子机柜瞬时冲击的动力学行为

doi:10.16183/j.cnki.jsjtu.2019.S1.020

摘要/Abstract

摘要： 建立某舰载机柜的有限元模型，采用瞬时动态分析法对机柜在冲击状态下的振动行为进行模拟计算，并分析了机箱托架厚度和立柱厚度等对冲击响应的影响.结果表明：机柜的立柱、机箱、托架以及盖板属于机柜敏感区域，容易产生高幅振动；机柜底板不同区域对冲击力的响应不同，因此传递到机柜不同部位的振动信号有所不同；随着高度增加，机箱法向位移和振动强度总体呈降低趋势；机柜系统的前后不对称性是导致机柜顶盖不同区域和前后立柱振动强度有所不同的主要原因.此外，参数化研究结果表明托架厚度和立柱厚度对机柜冲击响应也有重要影响.研究结果可为机柜结构抗冲击的合理设计提供理论依据.

关键词: 机柜；冲击；有限元分析；瞬态动力学

Abstract: A finite element model of a shipboard electric cabinet was established, and the vibration signals in different areas under the impact state were simulated by using the transient dynamic analysis method in Abaqus. The effect of the thickness of box bracket and stand columns on the impact response of cabinet was analyzed as well. The results show that the column, box, bracket and cover of the cabinet are sensitive areas of cabinet, and tend to generate high amplitude vibration. Since different areas of cabinet floor exhibit different responses to impact behavior, the vibration signals transmit to different parts of cabinet are different. As the height increases, the normal displacement and vibration intensity of box decrease gradually. The asymmetry of front and rear of cabinet system is the main reason for difference of vibration intensity between the different areas of cabinet top and front and rear columns. In addition, the thicknesses of bracket and column also have strong influence on the impact response of cabinet. The results can provide the theoretical basis for the reasonable design of impact resistance of cabinet structure.

Key words: cabinet; impact; finite element analysis; transient dynamic

中图分类号:

TP 391

王东伟，刘明星，吴霄，杨睿，代俊安. 电子机柜瞬时冲击的动力学行为[J]. 上海交通大学学报, 2019, 53(Sup.1): 109-117.

WANG Dongwei,LIU Mingxing,WU Xiao,YANG Rui,DAI Jun’an. Transient Impact Dynamics of Electronic Cabinet[J]. Journal of Shanghai Jiaotong University, 2019, 53(Sup.1): 109-117.

参考文献

［1］汪玉, 华宏星.舰船现代冲击理论及应用［M］.北京: 科学出版社, 2005. WANG Yu, HUA Hongxing. Theory and application of modern ship impact［M］. Beijing: Science Press, 2005. ［2］GUO Jun, HUANG Shizhang, KANG Youwei, et al. Experimental research on the impact environment of multiplate cabinet［J］. Shock and Vibration, 2019(15): 1-11. ［3］程林风, 王敏毅, 黄朝学. 基于ANSYS的舰载电子机柜振动可靠性研究［J］. 四川兵工学报, 2014, 35(1): 115-118. CHENG Linfeng, WANG Minyi, HUANG Chao-xue. Electronic ship-based cabinets reliability under vibration based on ANSYS［J］. Journal of Sichuan Ordnance, 2014, 35(1): 115-118. ［4］李亚璘, 欧阳光耀. 分配电箱冲击试验与数值仿真［J］. 中国舰船研究, 2011, 6(4): 34-36. LI Yalin, OUYANG Guangyao. Shock test and si-mulation of distribution box［J］. Chinese Journal of Ship Research, 2011, 6(4): 34-36. ［5］吴桐, 冯麟涵.冲击下舰载机柜内部冲击环境分析［J］. 兵器装备工程学报, 2018, 39(10): 58-62. WU Tong, FENG Linhan. Analysis of shock environment in shipboard aircraft cabinet under shock［J］. Journal of Ordnance Equipment Engineering, 2018, 39(10): 58-62. ［6］匡锐, 周海涛, 王迪, 等. 基于瞬态动力学仿真分析的某舰载发控仪机柜抗冲击设计研究［J］. 舰船电子工程, 2019, 39(8): 194-198. KUANG Rui, ZHOU Haitao, WANG Di, et al. Study of a ship borne console cabinet impact resistance design based on transient dynamics simulation analysis［J］. Ship Electronic Engineering, 2019, 39(8): 194-198. ［7］谢坤. 某型舰载电子设备冲击响应分析研究［D］.武汉: 华中科技大学, 2009. XIE Kun. Analysis of impact response of an electro-nic equipment on ship［D］. Wuhan: Huazhong University of Science and Technology, 2009. ［8］刘兆峰, 陈卫, 姜智锐, 等.核电数字化仪控系统机柜抗冲击分析技术［J］. 上海交通大学学报, 2018, 52(1): 5-9. LIU Zhaofeng, CHEN Wei, JIANG Zhirui, et al. Anti-shock analysis technology for nuclear power DCS cabinet［J］. Journal of Shanghai Jiao Tong University, 2018, 52(1): 5-9. ［9］孟庆鹏, 庄文许, 顾郑强. 某舰载雷达发射机机柜抗冲击仿真分析［J］. 雷达与对抗, 2014, 34(3): 39-42. MENG Qingpeng, ZHUANG Wenxu, GU Zhengqiang. Research on anti-shock simulation of transmitter cabinet of a ship borne radar［J］. Radar & ECM, 2014, 34(3): 39-42. ［10］何佳磊, 周川, 周宁波, 等. 基于动态设计分析方法的舰载鱼雷发射装置抗冲击特性研究［J］. 鱼雷技术, 2015, 23(2): 139-144. HE Jialei, ZHOU Chuan, ZHOU Ningbo, et al. Research on anti-shock capability of ship borne torpedo launcher based on dynamic design analysis method［J］. Torpedo Technology, 2015, 23(2): 139-144. ［11］WANG D W, MO J L, OUYANG H, et al. Improving dynamic and tribological behaviours by means of a Mn-Cu damping alloy with grooved surface features［J］. Tribology Letters, 2018, 66(2): 1-16. ［12］QIAN W J, CHEN G X, OUYANG H, et al. A transient dynamic study of the self-excited vibration of a railway wheel set-track system induced by saturated creep forces［J］. Vehicle System Dynamics, 2014, 52(9): 1115-1138.

[1]	钱鹏, 王国亮, 朱文峰. 柔性变形下车窗升降三维装配公差建模及优化[J]. 上海交通大学学报, 2020, 54(11): 1134-1141.
[2]	包清临, 柴华奇, 赵嵩正, 王吉林. 采用机器学习算法的技术机会挖掘模型及应用[J]. 上海交通大学学报, 2020, 54(7): 705-717.
[3]	李柏鹤, 蒋祖华, 陶宁蓉, 孟令通, 郑虹. 考虑平板车合作运输的船舶分段堆场间调度[J]. 上海交通大学学报, 2020, 54(7): 718-727.
[4]	马仲航, 张执南. 多旋翼无人机遥操机械臂多功能仿真实验平台的设计与实现[J]. 上海交通大学学报, 2020, 54(6): 636-642.
[5]	孟令通, 蒋祖华, 陶宁蓉, 刘建峰, 郑虹. 考虑工艺顺序和组合分段的多堆场调度方法[J]. 上海交通大学学报, 2020, 54(4): 331-343.
[6]	张洁，赵新明，张朋，盛夏，晁晓娜，田凤祥. 面向火箭总装过程的工期延误预警方法[J]. 上海交通大学学报, 2020, 54(3): 322-330.
[7]	孙铭阳，颜国正，刘大生，王志武，韩玎，赵凯，杨雷. 基于超宽带技术的强制戒毒人员实时定位系统[J]. 上海交通大学学报, 2020, 54(1): 76-84.
[8]	章云港,杨剑锋,易本顺. 低剂量CT图像去噪的改进型残差编解码网络[J]. 上海交通大学学报, 2019, 53(8): 983-989.
[9]	王红雨，尹午荣，汪梁，胡江颢，乔文超. 基于HSV颜色空间的快速边缘提取算法[J]. 上海交通大学学报, 2019, 53(7): 765-772.
[10]	周炳海，刘文龙. 考虑能耗和准时的混合流水线多目标调度[J]. 上海交通大学学报, 2019, 53(7): 773-779.
[11]	孟令通，蒋祖华，陶宁蓉，刘建峰，李柏鹤. 船舶组合分段堆场调度方法[J]. 上海交通大学学报, 2019, 53(7): 780-788.
[12]	江旭东，李鹏飞，刘铮，滕晓艳. 基于剪切稀化效应的血液流体-扩张血管耦合模型的血管损伤分析[J]. 上海交通大学学报, 2019, 53(6): 757-764.
[13]	唐然，赵迎新，吴虹. 基于改进反馈判决的自动识别系统信号解调算法[J]. 上海交通大学学报, 2019, 53(5): 610-615.
[14]	叶仙，胡洁，田畔，戚进，车大钿，丁颖. 基于精细复合多尺度熵与支持向量机的睡眠分期[J]. 上海交通大学学报（自然版）, 2019, 53(3): 321-326.
[15]	沈婷，孙锬锋，蒋兴浩. 基于双编码参数模型的同量化参数双压缩检测算法[J]. 上海交通大学学报（自然版）, 2019, 53(3): 334-340.