变截面涡旋膨胀机几何模型分析

doi:10.16183/j.cnki.jsjtu.2022.354

上海交通大学学报 ›› 2023, Vol. 57 ›› Issue (3): 309-315.doi: 10.16183/j.cnki.jsjtu.2022.354

所属专题：《上海交通大学学报》2023年“机械与动力工程”专题

变截面涡旋膨胀机几何模型分析

张朋成, 彭斌(), 马捷

兰州理工大学机电工程学院,兰州 730050

收稿日期:2022-09-08 接受日期:2022-09-22 出版日期:2023-03-28 发布日期:2023-03-30
通讯作者: 彭斌,教授,博士生导师,电话(Tel.):0931-2973330;E-mail:pengb2000@163.com.
作者简介:张朋成(1990-),博士生,从事涡旋机械、低温余热发电的研究.
基金资助:
国家自然科学基金(51675254);国家自然科学基金(51966009);“兰州理工大学优秀博士学位论文培育计划”资助项目

Comprehensive Analysis of Geometric Model of a Variable Thickness Scroll Expander

ZHANG Pengcheng, PENG Bin(), MA Jie

School of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou 730050, China

Received:2022-09-08 Accepted:2022-09-22 Online:2023-03-28 Published:2023-03-30

摘要/Abstract

摘要：

提出一种由不同基圆半径的圆渐开线组成的新型变截面涡旋膨胀机,论述型线的生成方法,给出型线的一般方程,建立一系列圆渐开线变截面涡旋膨胀机的几何模型,并分析控制系数对变截面涡旋膨胀机容积变化的影响.构建传统等截面、变截面涡旋膨胀机的几何模型,对比分析几何模型的优劣.结果表明:提出的新型变截面涡旋膨胀机模型不但具有传统变截面模型的优点,而且可以大幅度减少计算量,并在一定程度上丰富了变截面涡旋膨胀机的种类,为开发高性能的涡旋膨胀机提供借鉴.

关键词: 圆渐开线, 涡旋膨胀机, 变截面, 几何模型, 控制系数

Abstract:

A novel variable thickness scroll expander composed of involutes of circle with different base circle radii is proposed. The generating method of profile is discussed, the general equation of profile is given, and a series of geometric models of the variable thickness scroll expander are established. According to the established geometric model, the influence of control coefficient on the volume change of the variable thickness scroll expander is analyzed. In addition, the geometric models of the traditional equal constant thickness and variable thickness scroll expander are constructed, and the advantages and disadvantages of the geometric models are compared. The results show that the novel variable thickness scroll expander model not only has the advantages of the traditional variable thickness model, but also greatly reduces the amount of calculation. To a certain extent, it enriches the types of variable thickness scroll expanders and provides reference for the development of high-performance scroll expanders.

Key words: involute of circle, scroll expander, variable thickness, geometric model, control coefficient

中图分类号:

TH45

张朋成, 彭斌, 马捷. 变截面涡旋膨胀机几何模型分析[J]. 上海交通大学学报, 2023, 57(3): 309-315.

ZHANG Pengcheng, PENG Bin, MA Jie. Comprehensive Analysis of Geometric Model of a Variable Thickness Scroll Expander[J]. Journal of Shanghai Jiao Tong University, 2023, 57(3): 309-315.

图/表 13

图1

表1

图2

图3

图4

图5

图6

表2

图7

图8

图9

图10

图11

参考文献 19

[1]	GIUFFRIDA A. A theoretical study on the performance of a scroll expander in an organic Rankine cycle with hydrofluoroolefins (HFOs) in place of R245fa[J]. Energy, 2018, 161: 1172-1180. doi: 10.1016/j.energy.2018.07.146 URL
[2]	MUYE J, KUMAR G P, BRUNO J C, et al. Modelling of scroll expander for different working fluids for low capacity power generation[J]. Applied Thermal Engineering, 2019, 159: 113932.
[3]	LI L, TAO L R, GOU Y N, et al. Improvement and experimental study of scroll expander for organic Rankine cycle[J]. Energy Engineering, 2020, 117(4): 225-235. doi: 10.32604/EE.2020.010892 URL
[4]	CHA D A, KWON O K, OH M D. An experimental study on semiconductor process chiller using the digital scroll compressor[J]. Journal of Mechanical Science and Technology, 2014, 28(8): 3345-3352. doi: 10.1007/s12206-014-0745-7 URL
[5]	EMHARDT S, TIAN G H, SONG P P, et al. CFD modelling of small scale ORC scroll expanders using variable wall thicknesses[J]. Energy, 2020, 199: 117399.
[6]	彭斌, 李要红, 赵生显. 涡旋膨胀机的性能模拟[J]. 中国机械工程, 2018, 29(8): 965-970.
	PENG Bin, LI Yaohong, ZHAO Shengxian. Performance simulation for scroll expanders[J]. China Mechanical Engineering, 2018, 29(8): 965-970.
[7]	WEI M S, SONG P P, ZHAO B, et al. Unsteady flow in the suction process of a scroll expander for an ORC waste heat recovery system[J]. Applied Thermal Engineering, 2015, 78: 460-470. doi: 10.1016/j.applthermaleng.2015.01.010 URL
[8]	崔颂, 吴竺, 刘柳辰, 等. 无油涡旋膨胀机性能实验研究[J]. 太阳能学报, 2019, 40(1): 30-37.
	CUI Song, WU Zhu, LIU Liuchen, et al. Experimental investigation on performance of oil-free scroll expander[J]. Acta Energiae Solaris Sinica, 2019, 40(1): 30-37.
[9]	梁任, 余岳峰, 陈亮乐, 等. 螺杆膨胀机有机朗肯循环系统的变工况特性[J]. 上海交通大学学报, 2014, 48(9): 1291-1296.
	LIANG Ren, YU Yuefeng, CHEN Liangle, et al. Characteristics of variable conditions of screw expander system based on organic Rankine cycle[J]. Journal of Shanghai Jiao Tong University, 2014, 48(9): 1291-1296.
[10]	BELL I H, GROLL E A, BRAUN J E, et al. Comprehensive analytic solutions for the geometry of symmetric constant-wall-thickness scroll machines[J]. International Journal of Refrigeration, 2014, 45: 223-242. doi: 10.1016/j.ijrefrig.2014.05.029 URL
[11]	彭斌, 孙迎. 变截面涡旋压缩机数学模型及试验研究[J]. 机械工程学报, 2015, 51(14): 185-191. doi: 10.3901/JME.2015.14.185
	PENG Bin, SUN Ying. Investigation of mathematical modeling and experiment for variable thickness scroll compressor[J]. Journal of Mechanical Engineering, 2015, 51(14): 185-191. doi: 10.3901/JME.2015.14.185
[12]	BUSH J W, BEAGLE W P, HOUSMAN M E. Maximizing scroll compressor displacement using generalized profile geometry[C]// Proceedings of International Compressor Engineering Conference at Purdue. Indiana, USA: Rau W. Herrick Laboratories Press, 1994: 205-210.
[13]	陈进, 张永栋, 宋立权, 等. 基于多目标遗传算法的涡旋型线形状优化[J]. 机械工程学报, 2005, 41(1): 172-175.
	CHEN Jin, ZHANG Yongdong, SONG Liquan, et al. Profile optimization of scrolls based on multiobjective genetic algorithms[J]. Chinese Journal of Mechanical Engineering, 2005, 41(1): 172-175.
[14]	LIU Y G, TANG Y, CHANG Y, et al. Optimum design of scroll profiles created from involute of circle with variable radii by using finite element analysis[J]. Mechanism and Machine Theory, 2012, 55: 1-17. doi: 10.1016/j.mechmachtheory.2012.04.002 URL
[15]	王君, 李雪琴. 双涡旋齿涡旋机械渐变壁厚型线的构建[J]. 中国石油大学学报(自然科学版), 2008, 32(3): 128-132.
	WANG Jun, LI Xueqin. Construction of tapered thickness wrap profile for twinwrap scroll machinery[J]. Journal of China University of Petroleum (Edition of Natural Science), 2008, 32(3): 128-132.
[16]	刘涛, 邬再新, 刘振全. 法向等距线法生成涡旋压缩机型线的研究[J]. 机械工程学报, 2004, 40(6): 55-58.
	LIU Tao, WU Zaixin, LIU Zhenquan. Study on generating profile with nomal-equidistant-curve method for scroll compressor[J]. Chinese Journal of Mechanical Engineering, 2004, 40(6): 55-58.
[17]	王君, 刘振全. 涡旋压缩机双圆弧修正的解析法设计及误差分析[J]. 上海交通大学学报, 2005, 39(9): 1418-1421.
	WANG Jun, LIU Zhenquan. An analytical design method of wrap profile modification using symmetrical twin-circular arcs and error analysis for scroll compressors[J]. Journal of Shanghai Jiao Tong University, 2005, 39(9): 1418-1421.
[18]	王国梁. 采用双圆弧加直线单元组合型线的涡旋压缩机理论及试验研究[J]. 机械工程学报, 2010, 46(10): 144-147.
	WANG Guoliang. Theoretical and experimental research on the scroll compressor with arc-arc-line unit combined profile[J]. Journal of Mechanical Engineering, 2010, 46(10): 144-147.
[19]	侯才生, 刘涛. 基于Frenet标架的变截面涡旋型线构建与性能研究[J]. 上海交通大学学报, 2019, 53(12): 1495-1501.
	HOU Caisheng, LIU Tao. Construction and performance investigation of variable cross-section scroll profiles based on Frenet frame[J]. Journal of Shanghai Jiao Tong University, 2019, 53(12): 1495-1501.

n₁	n₂	R₂/mm	θ_M/rad	φ_end/rad
2	1	20	π	8π
3	1	30	4π/3	10π
4	1	40	3π/2	12π
5	1	50	8π/5	14π

变截面涡旋膨胀机几何模型分析

Comprehensive Analysis of Geometric Model of a Variable Thickness Scroll Expander

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

图/表 13

参考文献 19

相关文章 7

编辑推荐

Metrics

本文评价

[1]	彭斌, 刘慧鑫, 陶耀辉. 基于变径基圆渐开线涡旋压缩机的几何模型及优化研究[J]. 上海交通大学学报, 2023, 57(8): 1046-1054.
[2]	侯才生，刘涛. 基于Frenet标架的变截面涡旋型线构建与性能研究[J]. 上海交通大学学报, 2019, 53(12): 1495-1501.
[3]	邵文京. 厚度宽容度的应用[J]. 海洋工程装备与技术, 2018, 5(增刊): 182-185.
[4]	罗晶晶a,余海东a,赵春璋a,b,王皓a,b. 基于绝对节点坐标法变截面柔性梁运动稳定性研究[J]. 上海交通大学学报（自然版）, 2017, 51(10): 1174-1180.
[5]	赵君1,余海东2. 基于绝对节点坐标法的柔性双臂机构动力学分析[J]. 上海交通大学学报（自然版）, 2017, 51(10): 1160-1165.
[6]	江安烽1，李锐海2，牛萍3，王国利2，黄柏1，傅正财1. 后续雷击对输电线路绕击耐雷性能的影响研究[J]. 上海交通大学学报（自然版）, 2015, 49(04): 411-417.
[7]	汤磊，王羽平，杨平，翁一武. 低温热能有机物朗肯循环发电系统的最佳负载特性实验研究[J]. 上海交通大学学报（自然版）, 2014, 48(09): 1268-1273.