J Shanghai Jiaotong Univ Sci ›› 2021, Vol. 26 ›› Issue (2): 163-169.doi: 10.1007/s12204-021-2278-4
JIANG Chenqi (江晨琦), GONG Zhaoxin (宫兆新)
出版日期:
2021-04-28
发布日期:
2021-03-24
通讯作者:
GONG Zhaoxin (宫兆新)
E-mail:jackff@sjtu.edu.cn
JIANG Chenqi (江晨琦), GONG Zhaoxin (宫兆新)
Online:
2021-04-28
Published:
2021-03-24
Contact:
GONG Zhaoxin (宫兆新)
E-mail:jackff@sjtu.edu.cn
摘要: Pipe flow is a classic hydrodynamic issue. Most pipelines contain bends, and bends cause energy loss and distort the flow because of secondary flow. Deflectors are often used to adjust the flow quality in a bend. In this study, a numerical simulation using ANSYS Fluent 19.0 is used to analyze the effects of the deflector number, location and angle on the flow characteristics of a square pipe with a 90° bend. The velocity non-uniformity and the head loss are analyzed quantitatively. The secondary flow is presented visually, and its evolution characteristics are assessed. An optimized installation scheme for the deflectors is discussed, and a reference is provided for controlling the flow quality in bends via deflectors.
中图分类号:
JIANG Chenqi (江晨琦), GONG Zhaoxin (宫兆新) . Effect of Deflectors on the Flow Characteristics of a Square Pipe with a 90° Bend[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 163-169.
JIANG Chenqi (江晨琦), GONG Zhaoxin (宫兆新) . Effect of Deflectors on the Flow Characteristics of a Square Pipe with a 90° Bend[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 163-169.
[1] | GONTSOV N G, MARINOVA O A, TANANAEV A V. Turbulent flow around a bend in a circular pipe [J].Hydrotechnical Construction, 1984, 18(12): 596-602. |
[2] | DUTTA P, NANDI N. Numerical study on turbulent separation reattachment flow in pipe bends with different small curvature ratio [J]. Journal of the Institution of Engineers (India): Series C, 2019, 100(6):995-1004. |
[3] | XIE H Y. Numerical simulation of local water pressure loss for bend pipe of circular section at 90 degrees [J].Journal of Water Resources and Water Engineering,2014, 25(5): 190-192 (in Chinese). |
[4] | WEI Z Y. Numerical simulation of resistance loss and flow field characteristics of bend [J]. Gansu Water Resources and Hydropower Technology, 2018, 54(6): 34-36 (in Chinese). |
[5] | LUO Y H, YANG J, PAN W M. Calculation of turbulent flow in 90? elbow pipe with square cross-section[J]. Engineering Journal of Wuhan University, 2003,36(2): 62-65 (in Chinese). |
[6] | QIU L J, ZHANG G F, HAO M. Numerical simulation of internal flow field in bend duct based on FLUENT[J]. Journal of Liaoning Shihua University, 2013,33(1): 48-52 (in Chinese). |
[7] | SUN Y Z, HU S G, ZHAO J, et al. Numerical study on flow characteristics of 90° bend pipe under different Reynolds number [J]. Journal of University of Shanghai for Science and Technology, 2010, 32(6): 525-529(in Chinese). |
[8] | DUTTA P, SAHA S K, NANDI N, et al. Numerical study on flow separation in 90? pipe bend under high Reynolds number by k-ε modelling [J]. Engineering Science and Technology, an International Journal,2016, 19(2): 904-910. |
[9] | HUMPHREY J A C, WHITELAW J H, YEE G. Turbulent flow in a square duct with strong curvature [J].Journal of Fluid Mechanics, 1981, 103: 443-463. |
[10] | DING Z R. Engineering fluid mechanics (Volume 1)[M]. Beijing: Mechanical Industry Press, 2013 (in Chinese). |
[11] | WANG Z J, LI X H, TANG L J, et al. Optimization research on deflectors installed in right-angle bend tube with rectangular section [J]. Huadian Technology,2019, 41(8): 32-37 (in Chinese). |
[12] | LAN L W. Numerical simulation analysis of inducting elbow [J]. Guangzhou Chemical Industry, 2014, 42(1):105-106 (in Chinese). |
[13] | YU F, LIU M, LI W D, et al. Layout optimization of guide plates in a 90 degree elbow with rectangular cross section [J]. Journal of Chinese Society of Power Engineering, 2015, 35(2): 147-152 (in Chinese). |
[14] | LIU F, HE J Y, LONG Z H. Parameter sensitivity analysis of water head loss calculation of 90° curved pipe based on CFD [J]. Journal of Irrigation and Drainage, 2019, 38(8): 79-83 (in Chinese). |
[1] | 石亚东, 刘冉, 王铖恺, 吴泽锐. 基于Benders分解和分枝定界的随机交期批量流流水车间调度[J]. 上海交通大学学报, 2024, 58(8): 1271-1281. |
[2] | 詹博淳, 冯昌森, 王晓晖, 张恒, 马军伟, 文福拴. 基于碳排放流模型的分布式产消者点对点电-碳交易机制[J]. 上海交通大学学报, 2024, 58(12): 1846-1856. |
[3] | 刘炳文, 吴雄, 曹滨睿, 麻淞, 何雯雯. 基于增强型Benders分解的区域综合能源系统联合规划[J]. 上海交通大学学报, 2024, 58(10): 1513-1523. |
[4] | HUANG Tao (皇涛), WANG Kun (王锟), ZHAN Mei (詹梅), GUO Junqing (郭俊卿), CHEN Xuewen (陈学. Wall Thinning Characteristics of Ti-3Al-2.5V Tube in Numerical Control Bending Process[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(5): 647-653. |
[5] | VU Van Tuyen, YANG Ping(杨平). Tool for Predicting the Ultimate Bending Moment of Ship and Ship-Shaped Hull Girders[J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(4): 515-. |
[6] | ZHOU Yu (周宇), DI Shengkui (狄生奎), XIANG Changsheng (项长生), WANG Lixian (王立宪). Damage Detection for Simply Supported Bridge with Bending Fuzzy Stiffness Consideration[J]. sa, 2018, 23(2): 308-319. |
[7] | DENG Dong (邓冬), XIE Si-wei (谢斯卫), WANG Rong-shun*(汪荣顺). Two-Phase Flow Pressure Drop of Liquid Nitrogen Boiling in the Straight Section Downstream of U-Bend[J]. 上海交通大学学报(英文版), 2014, 19(4): 495-501. |
[8] | CHEN Xia* (陈 溪), LIU Xi-lab (刘西拉). Limit Analysis for Reinforced Concrete Rectangular Members Under Bending, Shear and Torsion[J]. 上海交通大学学报(英文版), 2014, 19(2): 129-138. |
[9] | YANG Qiu-ping1* (杨秋平), ZHANG Hao2 (张 皞), SANG Hui-yun2 (桑惠云), XIE Xin-lian2 (谢新连. Mathematical Approach for Fleet Planning Under Complicated Circumstances[J]. 上海交通大学学报(英文版), 2014, 19(2): 241-250. |
[10] | YAN Yu1 (阎昱), WANG Hai-bo1* (王海波), WAN Min2 (万敏). Forming Path Optimization for Press Bending of Aluminum Alloy Aircraft Integral Panel[J]. 上海交通大学学报(英文版), 2012, 17(5): 635-642. |
[11] | BAO Xi-rong1 (包喜荣), LIU Yu-yan1 (刘宇雁), LI Ge1 (李革), CHEN Lin1 (陈林) WANG Jian-guo. Research and Application of Pre-bending Automatic Control Models of 100 m Rail[J]. 上海交通大学学报(英文版), 2012, 17(4): 465-469. |
阅读次数 | ||||||||||||||||||||||||||||||||||||||||||||||||||
全文 124
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
摘要 533
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||