Journal of Shanghai Jiao Tong University (Science) ›› 2018, Vol. 23 ›› Issue (4): 538-.doi: 10.1007/s12204-018-1975-0

• • 上一篇    下一篇

Structural Optimization of Hatch Cover Based on Bi-directional Evolutionary Structure Optimization and Surrogate Model Method

LI Kai (李楷), YU Yanyun (于雁云), HE Jingyi (何靖仪), ZHAO Decai (赵德财), LIN Yan (林焰)   

  1. (School of Naval Architecture and Ocean Engineering, Dalian University of Technology, Dalian 116023, Liaoning, China)
  • 发布日期:2018-08-02
  • 通讯作者: LI Kai (李楷) E-mail:likai@dlut.edu.cn

Structural Optimization of Hatch Cover Based on Bi-directional Evolutionary Structure Optimization and Surrogate Model Method

LI Kai (李楷), YU Yanyun (于雁云), HE Jingyi (何靖仪), ZHAO Decai (赵德财), LIN Yan (林焰)   

  1. (School of Naval Architecture and Ocean Engineering, Dalian University of Technology, Dalian 116023, Liaoning, China)
  • Published:2018-08-02
  • Contact: LI Kai (李楷) E-mail:likai@dlut.edu.cn

摘要: Weight reduction has attracted much attention among ship designers and ship owners. In the present work, based on an improved bi-directional evolutionary structural optimization (BESO) method and surrogate model method, we propose a hybrid optimization method for the structural design optimization of beam-plate structures, which covers three optimization levels: dimension optimization, topology optimization and section optimization. The objective of the proposed optimization method is to minimize the weight of design object under a group of constraints. The kernel optimization procedure (KOP) uses BESO to obtain the optimal topology from a ground structure. To deal with beam-plate structures, the traditional BESO method is improved by using cubic box as the unit cell instead of solid unit to construct periodic lattice structure. In the first optimization level, a series of ground structures are generated based on different dimensional parameter combinations, the KOP is performed to all the ground structures, the response surface model of optimal objective values and dimension parameters is created, and then the optimal dimension parameters can be obtained. In the second optimization level, the optimal topology is obtained by using the KOP according to the optimal dimension parameters. In the third optimization level, response surface method (RSM) is used to determine the section parameters. The proposed method is applied to a hatch cover structure design. The locations and shapes of all the structural members are determined from an oversized ground structure. The results show that the proposed method leads to a greater weight saving, compared with the original design and genetic algorithm (GA) based optimization results.

关键词: hatch cover, structure optimization, multi-level optimization, bi-directional evolutionary structural optimization, response surface method

Abstract: Weight reduction has attracted much attention among ship designers and ship owners. In the present work, based on an improved bi-directional evolutionary structural optimization (BESO) method and surrogate model method, we propose a hybrid optimization method for the structural design optimization of beam-plate structures, which covers three optimization levels: dimension optimization, topology optimization and section optimization. The objective of the proposed optimization method is to minimize the weight of design object under a group of constraints. The kernel optimization procedure (KOP) uses BESO to obtain the optimal topology from a ground structure. To deal with beam-plate structures, the traditional BESO method is improved by using cubic box as the unit cell instead of solid unit to construct periodic lattice structure. In the first optimization level, a series of ground structures are generated based on different dimensional parameter combinations, the KOP is performed to all the ground structures, the response surface model of optimal objective values and dimension parameters is created, and then the optimal dimension parameters can be obtained. In the second optimization level, the optimal topology is obtained by using the KOP according to the optimal dimension parameters. In the third optimization level, response surface method (RSM) is used to determine the section parameters. The proposed method is applied to a hatch cover structure design. The locations and shapes of all the structural members are determined from an oversized ground structure. The results show that the proposed method leads to a greater weight saving, compared with the original design and genetic algorithm (GA) based optimization results.

Key words: hatch cover, structure optimization, multi-level optimization, bi-directional evolutionary structural optimization, response surface method

中图分类号: