R32管内流动沸腾传热系数关联式和摩擦压降关联式

doi:10.16183/j.cnki.jsjtu.2021.239

摘要/Abstract

摘要：

建立了适用于大范围几何参数和流动参数的R32制冷剂管内流动沸腾传热和摩擦压降计算关联式.从公开文献中收集了R32传热和摩擦压降的数据源构建两个组合数据库.其中,传热数据库由来自8个文献的1 489个数据点组成,涵盖的水力直径为1~6.3 mm,压降数据库由来自8个文献的496个数据点组成,涵盖水力直径范围为0.643~6 mm.以上述数据库为基础,利用无量纲参数分析预测法并考虑参数主导作用,建立了新的传热系数关联式和摩擦压降关联式.此外,利用现有的关联式对新关联式进行评估.结果表明,现有的几个关联式均具有较大的平均绝对误差(MAE)和最大绝对误差(MAX).而新的传热系数计算关联式具有良好的预测精度,其MAE为14.59%,有90.85%的数据点在±30%误差带以内;新的压降关联式预测精度高,其MAE为17.86%.总之,上述两个新关联式都具有较广的应用范围和良好的预测精度,非常适用于分析工质为R32的换热器的传热和压降性能.

关键词: R32, 流动沸腾, 传热系数, 压降, 新关联式

Abstract:

The objective of this study is to establish generalized correlations for R32 flow boiling heat transfer and frictional pressure drop in channels with wide ranges of geometric and flow parameters. In this paper, two consolidated databases for heat transfer and frictional pressure drop were amassed from open literature, which involved R32 as working fluid. The heat transfer database consisted of 1 489 data points from 8 sources, with hydraulic diameters of 1—6.3 mm, while the pressure drop database included 496 data points from 8 sources, which covered hydraulic diameters of 0.643—6 mm. A new heat transfer coefficient correlation and a frictional pressure drop correlation were developed based on the prediction technique of dimensionless parameter analysis considering the governing force effect. Moreover, the existing correlations were also introduced to perform assessment. The validation results show that the existing correlations have poor results of mean absolute errors (MAE) and significantly high maximum absolute errors (MAX), but the new heat transfer coefficient correlation provides a superior prediction accuracy with a MAE of 14.59% and 90.85% of data within ±30% error bands. In addition, the new pressure drop correlation exhibits the best performance, which yields a MAE of 17.86%. The two new correlations have a broad application range and satisfactory prediction accuracy, which are applicable to analyze the heat transfer and pressure drop performance of heat exchangers with refrigerant R32.

Key words: R32, flow boiling, heat transfer coefficient, pressure drop, new correlation

中图分类号:

TK124
TB61

谷波, 杜仲星, 曾炜杰, 田镇, 张智铤. R32管内流动沸腾传热系数关联式和摩擦压降关联式[J]. 上海交通大学学报, 2023, 57(1): 45-54.

GU Bo, DU Zhongxing, ZENG Weijie, TIAN Zhen, ZHANG Zhiting. Flow Boiling Heat Transfer Coefficient and Frictional Pressure Drop Correlations for R32[J]. Journal of Shanghai Jiao Tong University, 2023, 57(1): 45-54.

图/表 7

表1

图1

表2

图2

图3

图4

图5

参考文献 28

[1]	CHIEN N B, VU P Q, CHOI K, et al. Boiling heat transfer of R32, CO2 and R290 inside horizontal minichannel[J]. Energy Procedia, 2017, 105: 4822-4827. doi: 10.1016/j.egypro.2017.03.955 URL
[2]	LÓPEZ-BELCHÍ A, ILLÁN-GÓMEZ F, GARCÍA CASCALES J R, et al. R32 and R410A condensation heat transfer coefficient and pressure drop within minichannel multiport tube. Experimental technique and measurements[J]. Applied Thermal Engineering, 2016, 105: 118-131. doi: 10.1016/j.applthermaleng.2016.05.143 URL
[3]	WU C, LI J. Numerical simulation of flow patterns and the effect on heat flux during R32 condensation in microtube[J]. International Journal of Heat and Mass Transfer, 2018, 121: 265-274. doi: 10.1016/j.ijheatmasstransfer.2017.12.123 URL
[4]	ZHU Y, WU X, ZHAO R. R32 flow boiling in horizontal mini channels: Part I. Two-phase flow patterns[J]. International Journal of Heat and Mass Transfer, 2017, 115: 1223-1232. doi: 10.1016/j.ijheatmasstransfer.2017.07.101 URL
[5]	李炅, 张秀平, 贾磊, 等. 润滑油对R32在水平光管内流动沸腾换热特性及压降的影响[J]. 流体机械, 2016, 44(3): 65-69.
	LI Jiong, ZHANG Xiuping, JIA Lei, et al. Impact of lubricating oil on heat transfer and pressure drop characteristics of R32 boiling in horizontal tube[J]. Fluid Machinery, 2016, 44(3): 65-69.
[6]	李庆普, 陶乐仁, 王通, 等. R32水平单管内的蒸发换热特性[J]. 制冷学报, 2017, 38(3): 36-42.
	LI Qingpu, TAO Leren, WANG Tong, et al. Evaporation heat transfer of R32 inside horizontal tubes[J]. Journal of Refrigeration, 2017, 38(3): 36-42.
[7]	张丹亭, 陶乐仁, 李庆普, 等. R32在水平强化管内的流动沸腾换热特性研究[J]. 热能动力工程, 2019, 34(3): 97-102.
	ZHANG Danting, TAO Leren, LI Qingpu, et al. Study on the convective heat transfer of R32 inside horizontal enhanced tubes[J]. Journal of Engineering for Thermal Energy and Power, 2019, 34(3): 97-102.
[8]	张茜茜, 张莹, 张道旭, 等. 混合制冷剂R32/R290在水平三维微肋管内沸腾换热研究[J]. 低温工程, 2020(6): 9-17.
	ZHANG Qianqian, ZHANG Ying, ZHANG Daoxu, et al. Numerical simulation of boiling heat transfer for mixed refrigerant R32/R290 in a horizontal 3D micro-fin tube[J]. Cryogenics, 2020(6): 9-17.
[9]	LI M, DANG C, HIHARA E. Flow boiling heat transfer of HFO1234yf and HFC32 refrigerant mixtures in a smooth horizontal tube: Part II. Prediction method[J]. International Journal of Heat and Mass Transfer, 2013, 64: 591-608. doi: 10.1016/j.ijheatmasstransfer.2013.04.047 URL
[10]	YOSHIDA S, MORI H, HONG H, et al. Prediction of heat transfer coefficient for refrigerants flowing in horizontal evaporator tubes[J]. Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, 1994, 11(1): 67-78.
[11]	KIM S, MUDAWAR I. Universal approach to predicting saturated flow boiling heat transfer in mini/micro-channels —Part II. Two-phase heat transfer coefficient[J]. International Journal of Heat and Mass Transfer, 2013, 64: 1239-1256. doi: 10.1016/j.ijheatmasstransfer.2013.04.014 URL
[12]	ZHU Y, WU X, ZHAO R. R32 flow boiling in horizontal mini channels: Part II. Flow-pattern based prediction methods for heat transfer and pressure drop[J]. International Journal of Heat and Mass Transfer, 2017, 115: 1233-1244. doi: 10.1016/j.ijheatmasstransfer.2017.07.099 URL
[13]	WU X, ZHU Y, HUANG X. Influence of 0° helix angle micro fins on flow and heat transfer of R32 evaporating in a horizontal mini multichannel flat tube[J]. Experimental Thermal and Fluid Science, 2015, 68: 669-680. doi: 10.1016/j.expthermflusci.2015.07.010 URL
[14]	LONGO G A, MANCIN S, RIGHETTI G, et al. HFC32 and HFC410A flow boiling inside a 4 mm horizontal smooth tube[J]. International Journal of Refrigeration, 2016, 61: 12-22. doi: 10.1016/j.ijrefrig.2015.09.002 URL
[15]	MATSUSE Y, ENOKI K, MORI H, et al. Boiling heat transfer and pressure drop of a refrigerant R32 flowing in a small horizontal tube[J]. Heat Transfer Engineering, 2016, 37(7/8): 668-678. doi: 10.1080/01457632.2015.1067057 URL
[16]	JIGE D, SAGAWA K, INOUE N. Effect of tube diameter on boiling heat transfer and flow characteristic of refrigerant R32 in horizontal small-diameter tubes[J]. International Journal of Refrigeration, 2017, 76: 206-218. doi: 10.1016/j.ijrefrig.2017.02.012 URL
[17]	JIGE D, INOUE N. Flow boiling heat transfer and pressure drop of R32 inside 2.1 mm, 2.6 mm and 3.1 mm microfin tubes[J]. International Journal of Heat and Mass Transfer, 2019, 134: 566-573. doi: 10.1016/j.ijheatmasstransfer.2019.01.027 URL
[18]	HE G, ZHOU S, LI D, et al. Experimental study on the flow boiling heat transfer characteristics of R32 in horizontal tubes[J]. International Journal of Heat and Mass Transfer, 2018, 125: 943-958. doi: 10.1016/j.ijheatmasstransfer.2018.04.116 URL
[19]	LILLO G, MASTRULLO R, MAURO A W, et al. Flow boiling of R32 in a horizontal stainless steel tube with 6.00 mm ID. Experiments, assessment of correlations and comparison with refrigerant R410A[J]. International Journal of Refrigeration, 2019, 97: 143-156. doi: 10.1016/j.ijrefrig.2018.09.024 URL
[20]	黄秀杰. R32在微细通道内流动沸腾特性的实验及数值研究[D]. 北京: 清华大学, 2013.
	HUANG Xiujie. Experimental and numerical investigation on R32 flow boiling characteristics in micro-channels[D]. Beijing: Tsinghua University, 2013.
[21]	INOUE N, JIGE D, SAGAWA K. Evaporation heat transfer and pressure drop of R32 inside small-diameter 4.0 mm tubes[C]//International Refrigeration and Air Conditioning Conference. West Lafayette, Indiana, USA: Purdue e-Pubs, 2016: 1730.
[22]	LI H, HRNJAK P. Heat transfer and pressure drop of R32 evaporating in one pass microchannel tube with parallel channels[J]. International Journal of Heat and Mass Transfer, 2018, 127: 526-540.
[23]	TIAN Z, MA L, GU B, et al. Numerical model of a parallel flow minichannel evaporator with new flow boiling heat transfer correlation[J]. International Journal of Refrigeration, 2016, 63: 1-13. doi: 10.1016/j.ijrefrig.2015.10.032 URL
[24]	HAN X H, FANG Y B, WU M, et al. Study on flow boiling heat transfer characteristics of R161/oil mixture inside horizontal micro-fin tube[J]. International Journal of Heat and Mass Transfer, 2017, 104: 276-287. doi: 10.1016/j.ijheatmasstransfer.2016.08.043 URL
[25]	COOPER M G. Saturation nucleate pool boiling —A simple correlation[C]//First U.K. National Conference on Heat Transfer. UK: Pergamon, 1984: 785-793.
[26]	FANG X, WU Q, YUAN Y. A general correlation for saturated flow boiling heat transfer in channels of various sizes and flow directions[J]. International Journal of Heat and Mass Transfer, 2017, 107: 972-981. doi: 10.1016/j.ijheatmasstransfer.2016.10.125 URL
[27]	MÜLLER-STEINHAGEN H, HECK K. A simple friction pressure drop correlation for two-phase flow in pipes[J]. Chemical Engineering and Processing: Process Intensification, 1986, 20(6): 297-308. doi: 10.1016/0255-2701(86)80008-3 URL
[28]	DEL COL D, BISETTO A, BORTOLATO M, et al. Experiments and updated model for two phase frictional pressure drop inside minichannels[J]. International Journal of Heat and Mass Transfer, 2013, 67: 326-337. doi: 10.1016/j.ijheatmasstransfer.2013.07.093 URL

作者 (年份)	管材	几何参数		工况参数			n
作者 (年份)	管材	D_h/mm	T_sat/℃	G/(kg·m^-2·s^-1)	q/(kW·m^-2)	x	n
Li 等^[9](2013)	不锈钢	2	15	100~400	6~24	0.2~1	93
Wu 等 ^[13](2015)	不锈钢	2	15	100~400	10	0.1~0.98	18
Longo 等^[14](2016)	—	4	5~20	200~800	12~51	0.06~0.90	117
Matsuse 等^[15](2016)	铜	1	10	30~400	2~24	0.05~1	273
Jige 等^[16-17](2017,2019)	铜	1.0, 2.16, 3.48	15	50~600	5~40	0~1	702
He 等^[18](2018)	铜	4.3, 6.3	11	100~250	3~8	0~1	38
Lillo 等^[19](2019)	不锈钢	6	24.6~40.6	146~507	2.4~41.2	0.02~0.99	248
总计		1~6.3	5~40.6	30~800	2~51	0~1	1 489

作者(年份)	管材	几何参数			工况参数			n
作者(年份)	管材	L/m	D_h/mm	T_sat /℃	G/ (kg·m^-2·s^-1)	q/ (kW·m^-2)	x	n
Huang^[20] (2013)	不锈钢	0.45	2	10, 15, 20	100~400	10~40	0~0.9 平均干度	69
Wu 等^[13] (2015)	不锈钢	0.53	2	15	400	10	0~0.75	8
Longo 等^[14] (2016)	—	0.8	4	5, 10, 20	200~800	25	0.05~0.9 平均干度	116
Matsuse 等^[15] (2016)	铜	0.44	1	10	30~400	0	0.05~1 平均干度	50
Inoue等^[21] (2016)	—	0.55	3.5	15	100, 400	0	0.06~0.9 进口干度	27
Jige 等^[16] (2017)	铜	0.55	1.0, 2.16, 3.48	15	200~600	5~20	0~1 平均干度	123
Li等^[22] (2018)	铝	0.152 4	0.643	15, 20	100~200	0	0~0.95 平均干度	24
Lillo等^[19] (2019)	不锈钢	0.237 5	6	25, 30, 35.2, 40	152~300	0	0.03~1 平均干度	79
总计			0.643~6	5~40	30~800	0~40	0~1	496