聚合物薄膜表面微结构的粉末热辊压成形工艺

doi:10.16183/j.cnki.jsjtu.2017.09.010

摘要/Abstract

摘要： 利用卷对卷热辊压工艺连续、高效和粉末冶金成形技术精度高的优点，提出了一种在聚合物薄膜表面制备微结构粉末的热辊压成形工艺方法，构建了聚合物薄膜表面微结构粉末热辊压成形工艺试验系统并进行了粉末热辊压成形工艺试验，通过单因素试验研究了工艺参数(模具温度、辊压速度和辊压力)对成形质量的影响规律.结果表明，采用模具温度130~145℃，辊压速度0.2~0.8m/min和辊压力250~500N的粉末热辊压成形工艺参数，能够得到聚合物粉末充型完整的微金字塔阵列结构.

关键词: , 聚合物薄膜, 微结构, 微金字塔阵列结构, 粉末热辊压, 工艺参数

Abstract: This study proposed a rolltoroll (R2R) powder hot embossing process for the fabrication of microstructures on polymer film by combining the merits of R2R hot embossing process and powder metallurgy technology. An R2R powder hot embossing system was developed and a series of embossing experiments were conducted. The influences of processing parameters, which included mold temperature, feeding speed and applied force, had been investigated systematically by using the onevariableatatime (OVAT) method. It was found that the completelyfilled micropyramid arrays could be fabricated by R2R powder hot embossing process under the mold temperature of 130—145℃, the feeding speed of 0.2—0.8m/min and the applied force of 250—500N.

Key words: polymer film, microstructures, micropyramid arrays, rolltoroll , (R2R) powder hot embossing, process parameters

中图分类号:

舒赟翌，彭林法，易培云，来新民. 聚合物薄膜表面微结构的粉末热辊压成形工艺[J]. 上海交通大学学报（自然版）, 2017, 51(9): 1083-1089.

?SHU Yunyi,PENG Linfa,YI Peiyun,LAI Xinmin. RolltoRoll Powder Hot Embossing Process for Fabrication of MicroStructures on Polymer Film[J]. Journal of Shanghai Jiaotong University, 2017, 51(9): 1083-1089.

参考文献

［1］易培云, 彭林法, 来新民. 光学薄膜微细结构制造方法新进展［J］. 科学通报, 2015, 60(28/29): 27072718.
YI Peiyun, PENG Linfa, LAI Xinmin. Recent progress in fabrication methods for micro structures on optical thin film［J］. Chinese Science Bulletin, 2015, 60(28/29): 27072718.
［2］LEE J Y, KIM Y J, NAHM K B, et al. Optical simulation of micropyramid arrays for the applications in the field of backlight unit of LCD［C］∥IMID/IDMC ′06 DIGEST. 2006: 13431346.
［3］贺永, 傅建中, 陈子辰. 微热压印过程中聚合物流动形貌的研究［J］.光学精密工程, 2008, 16(2): 270278.
HE Yong, FU Jianzhong, CHEN Zichen. Study on polymer flow profile in micro hot embossing［J］. Optics and Precision Engineering, 2008, 16 (2): 270278.
［4］NAGARAJAN P, YAO D. Rubberassisted micro forming of polymer thin films［J］. Microsystem Technologies, 2009, 15(2): 251257.
［5］FAGAN M D, KIM B H, YAO D. A novel process for continuous thermal embossing of largearea nanopatterns onto polymer films［J］. Advances in Polymer Technology, 2009, 28(4): 246256.
［6］YUN D, SON Y, KYUNG J, et al. Development of rolltoroll hot embossing system with induction heater for micro fabrication［J］. Review of Scientific Instruments, 2012, 83(1): 015108.
［7］VELTEN T, BAUERFELD F, SCHUCK H, et al. Rolltoroll hot embossing of microstructures［J］. Microsystem Technologies, 2011, 17(4): 619627.
［8］YI P, SHU Y, DENG Y, et al. Mechanism of forming defects in rolltoroll hot embossing of micropyramid arrays I: Experiments［J］. Journal of Micromechanics and Microengineering, 2015, 25(10): 105017.
［9］SAHLI M, GELIN J C, BARRIRE T. Replication of microchannel structures in WCCo feedstock using elastomeric replica moulds by hot embossing process［J］. Materials Science and Engineering: C, 2015, 55: 252266.
［10］银锐明, 范景莲, 钟定铭, 等. Fe2(MoO4)3/Si3N4复合粉末还原及热压微观组织结构分析［J］.中南大学学报 (自然科学版), 2011, 42(4): 909914.
YIN Ruiming, FAN Jinglian, ZHONG Dingming, et al. Microstructure of Fe2(MoO4)3/Si3N4 composite powders by reduction and hot pressing［J］. Journal of Central South University (Science and Technology), 2011, 42(2): 909914.
［11］SRIVATSAN T S, WOODS R, PETRAROLI M, et al. An investigation of the influence of powder particle size on microstructure and hardness of bulk samples of tungsten carbide［J］. Powder Technology, 2002, 122(1): 5460.
［12］XU Y, TSUMORI F, KANG H, et al. Fabrication of micro patterned ceramic structure by imprinting process［J］. Journal of the Japan Society of Powder & Powder Metallurgy, 2011, 58(11): 673678.
［13］DENG Y J, YI P Y, PENG L F, et al. Experimental investigation on the largearea fabrication of micropyramid arrays by rolltoroll hot embossing on PVC film［J］. Journal of Micromechanics and Microengineering, 2014, 24(4): 045023.
［14］CHENG B, PRICE S, LYDON J, et al. On process temperature in powderbed electron beam additive manufacturing: Model development and validation［J］. Journal of Manufacturing Science and Engineering, 2014, 136(6): 061019.
［15］MONTES J M, CUEVAS F G, CINTAS J. Effective area in powder compacts under uniaxial compression［J］. Materials Science and Engineering: A, 2005, 395(1/2): 208213.

[1]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[2]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[3]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[4]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[5]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[6]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[7]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[8]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[9]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[10]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[11]	尤舒曼, 李杰, 赵亦希, 胡逸辉. 柔性翻边成形工艺参数研究[J]. 上海交通大学学报, 2021, 55(10): 1246-1254.
[12]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[13]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[14]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[15]	QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778.